Athletics at the 2013 Summer Universiade – Men's 1500 metres
The men's 1500 metres event at the 2013 Summer Universiade was held on 7–9 July.
Medalists
| Gold | Silver | Bronze |
Valentin Smirnov |
Jeremy Rae.svg.png){kind=small} |
Jeremiah Motsau |
Results
Heats
Qualification: First 3 in each heat (Q) and the next 3 fastest (q) qualified for the final.[1]
| Rank | Heat | Name | Nationality | Time | Notes |
|---|---|---|---|---|---|
| 1 | 2 | Jeremiah Motsau | | 3:40.29 | Q |
| 2 | 2 | Yegor Nikolayev | | 3:41.14 | Q |
| 3 | 2 | Paul Chelimo |  | 3:43.27 | Q |
| 4 | 1 | Valentin Smirnov | | 3:43.72 | Q, SB |
| 5 | 1 | Ali Hamdi | .svg.png){kind=small} | 3:43.77 | Q |
| 6 | 2 | Jesús Arturo Esparza |  | 3:43.81 | q |
| 7 | 1 | Dmitrijs Jurkevičs |  | 3:43.93 | Q |
| 8 | 1 | Andries Hlaselo | | 3:44.28 | q |
| 9 | 1 | Ross Proudfoot | | 3:44.66 | q |
| 10 | 2 | Mitja Krevs |  | 3:45.45 | |
| 11 | 3 | José Juan Esparza | | 3:45.74 | Q |
| 12 | 2 | Ivan Obezchik |  | 3:46.36 | |
| 13 | 1 | Cristian Vorovenci |  | 3:47.07 | |
| 14 | 3 | Jeremy Rae | | 3:47.81 | Q |
| 15 | 3 | Johannes Alnes |  | 3:48.63 | Q, SB |
| 16 | 3 | Allar Lamp |  | 3:49.20 | |
| 17 | 2 | Ashot Hayrapetyan |  | 3:51.06 | |
| 18 | 3 | Jean Ferrugem |  | 3:58.52 | |
| 19 | 1 | Herbert Gidadui |  | 4:00.00 | |
| 20 | 2 | Gayan Paradiya Waththalage |  | 4:03.67 | |
| 21 | 3 | William Awunime Akuka |  | 4:04.65 | |
| 22 | 1 | Ahmad Ghalie |  | 4:07.49 | |
| 23 | 2 | Abdullahi Barre |  | 4:14.69 | |
| 24 | 3 | Balla Sanogo |  | 4:47.69 | |
| 3 | Jaad Ahmed Aballa |  | DNF | ||
| 3 | Ibrahim Omar Abdi |  | DNS | ||
| 1 | Víctor Manuel González |  | DNS | ||
| 1 | Alex Ngouari-Mouissi |  | DNS | ||
| 2 | Tuomo Salonen |  | DNS | ||
Final
| Rank | Name | Nationality | Time | Notes |
|---|---|---|---|---|
 | Valentin Smirnov | | 3:39.39 | SB |
 | Jeremy Rae | | 3:39.45 | |
 | Jeremiah Motsau | | 3:39.51 | |
| 4 | Yegor Nikolayev | | 3:39.59 | |
| 5 | Dmitrijs Jurkevičs | | 3:39.79 | |
| 6 | Paul Chelimo | | 3:40.41 | |
| 7 | Andries Hlaselo | | 3:40.95 | |
| 8 | José Juan Esparza | | 3:42.00 | |
| 9 | Ross Proudfoot | | 3:44.33 | |
| 10 | Ali Hamdi | | 3:44.38 | |
| 11 | Jesús Arturo Esparza | | 3:45.57 | |
| 12 | Johannes Alnes | | 3:53.01 | |
gollark: I think the sides work too.
gollark: The reason for the first thing is that remote wrapping/peripheral listing/whatever else is actually implemented in Lua using modems' `callRemote` (and other things), and only descends the "peripheral tree" one level because that's all it has to in vanilla CC.
gollark: The only important constraints I know of is that the OC relay must be directly adjacent to the computer (unless you program around this) and that you can't connect to the top of the 3D printer.
gollark: I think it's just that you can't connect stuff to the top.
gollark: Move items in and out, yes.
References
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.