Accumulative roll bonding

Accumulative roll bonding (ARB) is a severe plastic deformation (SPD) process. It is a method of rolling a stack of metal sheets, which are repeatedly rolled to a severe reduction ratio, sectioned into two halves, piled again and rolled. It has been often proposed as a method for the production of metal materials with ultrafine grain microstructure. The earliest works on ARB were by Nobuhiro Tsuji, Y. Saito and co-workers.[1][2] To obtain a single slab of a solid material, the rolling involves not only deformation, but also roll bonding.[3]

References
  1. Saito, Y; Utsunomiya, H; Tsuji, N; Sakai, T (1999). "Novel Ultra-High Straining Process for Bulk Materials - Development of the Accumulative Roll-Bonding (ARB)". Acta Materialia. 47 (2): 579–583. doi:10.1016/s1359-6454(98)00365-6.
  2. Tsuji, N.; Saito, Y.; Lee, S.-H.; Minamino, Y. (2003). "ARB (Accumulative Roll-Bonding) and other new Techniques to Produce Bulk Ultrafine Grained Materials". Advanced Engineering Materials. 5 (5): 338. doi:10.1002/adem.200310077.
  3. Karlik; Slamova; Homola (2004). "Accumulative roll-bonding: first experience with a twin-roll cast AA8006 alloy". Journal of Alloys and Compounds. 378 (1–2): 322–325. doi:10.1016/j.jallcom.2003.10.082.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.