7.62×53mmR

The 7.62×53mmR (also known as the 7.62×53mmR Finnish) rifle cartridge is a Finnish design based on the Russian 7.62×54mmR round dating back to 1891.

7.62×53mmR
7.62×53mmR cartridges
TypeRifle
Place of originFinland
Service history
In service1918–present
Used byFinland
Production history
Designed1918
Produced1918–present
Specifications
Parent case7.62×54mmR
Case typeRimmed, necked
Bullet diameter7.85 mm (0.309 in)
Neck diameter8.55 mm (0.337 in)
Shoulder diameter11.61 mm (0.457 in)
Base diameter12.42 mm (0.489 in)
Rim diameter14.40 mm (0.567 in)
Rim thickness1.60 mm (0.063 in)
Case length53.50 mm (2.106 in)
Overall length77.00 mm (3.031 in)
Case capacity4.16 cm3 (64.2 gr H2O)
Rifling twist300 mm (1 in 11.81 in)
Primer typeBerdan
Maximum pressure390.00 MPa (56,565 psi)
Ballistic performance
Bullet mass/type Velocity Energy
185.4 gr (12 g) FMJ 812 m/s (2,660 ft/s) 3,960 J (2,920 ft⋅lbf)

History

After gaining its independence in 1917 and after the Finnish Civil War of 1918, large numbers of Model 1891 Mosin–Nagant rifles were in the hands of the Finnish military. As the old barrels were worn out, they were replaced by new 7.83 mm (.308 in) barrels and the leftover 7.62×54mmR cartridges being in short supply, a domestic product was needed. This gave birth to the 7.62×53mmR.

In the late 1930s the Finnish Army started loading military cartridges with domestically produced 7.87 mm (.310 in) diameter D166 bullets as the production of new M39 "Ukko-Pekka" rifles barreled for 7.62×54R diameter bullets started. This change was due in part to allow the use of captured Soviet ammunition and machine gun ammunition which often was of a slightly greater bore diameter than its Finnish counterparts. The rifling twist rate was also changed from 300 mm (1 in 11.81 in) to 254 mm (1 in 10 in).[1]

The 7.62×53mmR cartridge remains in military use to this day, although it is now only used by the 7.62 TKIV 85 sniper rifle. PKM machine guns and other Russian weapons in use by the Finnish Defence Forces use the 7.62×54mmR exclusively. The Finnish Defence Forces issued instructions that when ever possible, personnel issued with a rifle chambered for 7.62×53mmR (effectively the TKIV 85 rifle) should use 7.62×53mmR ammunition only, and that use of 7.62×54mmR is only allowed when 7.62×53mmR is not available.

Cartridge dimensions

The 7.62×53mmR has 4.16 ml (64 grains) H2O cartridge case capacity. The exterior shape of the case was designed to promote reliable case feeding and extraction in bolt action rifles and machine guns alike, under extreme conditions.

7.62×53mmR maximum C.I.P. cartridge dimensions.All sizes in millimeters (mm).[2]

Americans would define the shoulder angle at alpha/2 ≈ 18.5 degrees. The common rifling twist rate for this cartridge is 300 mm (1 in 11.81 in), 4 grooves, Ø lands = 7.59 mm, Ø grooves = 7.83 mm, land width = 4.20 mm and the primer type used to be Berdan, but nowadays large rifle is more common.

According to the official C.I.P. (Commission Internationale Permanente pour l'Epreuve des Armes à Feu Portatives) guidelines the 7.62 × 53 R case can handle up to 390 MPa (56,564 psi) piezo pressure. In C.I.P. regulated countries every rifle cartridge combo has to be proofed at 125% of this maximum C.I.P. pressure to certify for sale to consumers.

Differences between 7.62×53mmR (Finland) and 7.62×54mmR (Russia)

According to official C.I.P. rulings the TDCC sheets the 7.62 × 53 R and 7.62 × 54 R feature differences.[3] C.I.P. rulings are indisputable legally binding for civilian use in C.I.P. member states like Finland and Russia. Only governmental organizations, like military and police forces and other firearms bearing public power agencies, from the C.I.P. member states are legally exempted from having to comply with C.I.P. rulings.

Comparison of Finnish 7.62×53mmR and Russian 7.62×54mmR cartridges

Some dimensional differences between the C.I.P. 7.62 × 53 R and 7.62 × 54 R TDCC sheets:

  • Round length (L6): 77.00 mm (54R: 77.16)
  • Case length (L3): 53.50 mm (54R: 53.72)
  • Rim diameter (R1): 14.40 mm (54R: 14.48)
  • Bullet diameter (G1): 7.85 mm (54R: 7.92)

The Finnish commercial ammunition manufacturer Lapua does not make a difference between the 53R and 54R, but produces cartridges that will function in weapons chambered for either one.

The Russian ammunition maker Barnaul states that Russian cartridges marked 7.62×53 are the same as 7.62×54. From their web site: "Some hunters have been confused because there have been varying marking on the package, case bottom and stamps: 7.62×53: 7.62×53R: 7.62×54: 7.62×54R. This happened because the 53.72 mm case length was rounded off differently in various countries. After Russia became a member of the European Permanent Coordinated Commission, the final name - "7.62×54R" - of the cartridge was accepted. "[4]

Additionally, Russian ammunition manufacturer LVE (Novosibirsk Cartridge Plant) states, "The cartridges cal.7,62×54R are produced by various producers around the world. Producers mark these cartridges differently, and this leads to confusion among the customers – 7.62х53; 7.62×53R; 7.62х54; 7.62×54R. The confusion is based on difference in rounding out (rounding up or rounding down) the case length (case length of our cartridges is 53.65-0.2 mm). The letter "R" indicates a case rim. After Russia’s joining European Commission (ПМК) a definite name of this cartridge was determined – 7,62×54R. Therefore, you may use cartridges of caliber 7.62х54R freely with your arms [marked as 7.62×53R]."[5]

gollark: Also, seriously, *how* are you legally unable to share the code?
gollark: It's controlled by the team which also run the bot, and I don't think there's a way to run an alternative bot.
gollark: Well, yes, that's fair, in that it kind of mimics them.
gollark: ... so it's *not* like a real market?
gollark: If people detect what they think is a pricing error in the market, they can make money off it, providing incentives.

See also

References
  1. Finnish Model 1939 (M39) Service Rifle
  2. C.I.P. TDCC sheet 7.62 × 53 R (indisputable legally binding dimensions and data for civilian use in Finland and Russia)
  3. C.I.P. TDCC sheet 7.62 × 54 R (indisputable legally binding dimensions and data for civilian use in Finland and Russia)
  4. "BARNAUL - JSC – Barnaul Machine – Tool Plant".
  5. Novosibirsk Cartridge Plant
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.