2009 Türk Telecom İzmir Cup – Singles
Gilles Müller was the champion in 2008 but did not play this year.
Andrea Stoppini became the new champion, defeating Marsel İlhan in the final 7–6(5), 6–2.
Singles | |
---|---|
2009 Türk Telecom İzmir Cup | |
Champion | ![]() |
Runner-up | ![]() |
Final score | 7–6(5), 6–2 |
Seeds
Lu Yen-hsun (First Round) Sergiy Stakhovsky (First Round) Michael Berrer (First Round) Benedikt Dorsch (First Round) Michail Elgin (First Round) Chris Guccione (Second Round) Karol Beck (First Round) Prakash Amritraj (Second Round)
Draw
Key
- Q = Qualifier
- WC = Wild Card
- LL = Lucky Loser
- Alt = Alternate
- SE = Special Exempt
- PR = Protected Ranking
- ITF = ITF entry
- JE = Junior Exempt
- w/o = Walkover
- r = Retired
- d = Defaulted
Final four
Semifinals | Final | ||||||||||||
![]() | 7 | 6 | |||||||||||
![]() | 5 | 3 | |||||||||||
![]() | 65 | 2 | |||||||||||
![]() | 7 | 6 | |||||||||||
![]() | w/o | ||||||||||||
![]() | |||||||||||||
Top half
First Round | Second Round | Quarterfinals | Semifinals | ||||||||||||||||||||||||
1 | ![]() | 6 | 65 | 3 | |||||||||||||||||||||||
![]() | 2 | 7 | 6 | ![]() | 6 | 6 | |||||||||||||||||||||
![]() | 6 | 6 | ![]() | 3 | 4 | ||||||||||||||||||||||
WC | ![]() | 2 | 3 | ![]() | 4 | 4 | |||||||||||||||||||||
Q | ![]() | 66 | 67 | ![]() | 6 | 6 | |||||||||||||||||||||
![]() | 7 | 7 | ![]() | 6 | 7 | ||||||||||||||||||||||
![]() | 64 | 4 | 6 | ![]() | 4 | 64 | |||||||||||||||||||||
6 | ![]() | 7 | 6 | ![]() | 7 | 6 | |||||||||||||||||||||
3 | ![]() | 4 | 3 | ![]() | 5 | 3 | |||||||||||||||||||||
![]() | 6 | 6 | ![]() | 62 | 3 | ||||||||||||||||||||||
WC | ![]() | 0 | 0 | ![]() | 7 | 6 | |||||||||||||||||||||
![]() | 6 | 6 | ![]() | 6 | 6 | ||||||||||||||||||||||
WC | ![]() | 1 | 1 | ![]() | 0 | 2 | |||||||||||||||||||||
![]() | 6 | 6 | ![]() | 6 | 6 | ||||||||||||||||||||||
![]() | 3 | 64 | 8 | ![]() | 2 | 4 | |||||||||||||||||||||
8 | ![]() | 6 | 7 |
Bottom half
First Round | Second Round | Quarterfinals | Semifinals | ||||||||||||||||||||||||
7 | ![]() | 1 | 3 | ||||||||||||||||||||||||
Q | ![]() | 6 | 6 | Q | ![]() | 4 | 6 | 3 | |||||||||||||||||||
![]() | 3 | 2 | ![]() | 6 | 2 | 6 | |||||||||||||||||||||
![]() | 6 | 6 | ![]() | 7 | 6 | ||||||||||||||||||||||
![]() | 3 | 4 | LL | ![]() | 5 | 3 | |||||||||||||||||||||
Q | ![]() | 6 | 6 | Q | ![]() | 62 | 64 | ||||||||||||||||||||
LL | ![]() | 7 | 6 | LL | ![]() | 7 | 7 | ||||||||||||||||||||
4 | ![]() | 65 | 4 | ![]() | w/o | ||||||||||||||||||||||
5 | ![]() | 1 | 4 | ![]() | |||||||||||||||||||||||
![]() | 6 | 6 | ![]() | 6 | 6 | ||||||||||||||||||||||
![]() | 7 | 6 | ![]() | 3 | 2 | ||||||||||||||||||||||
WC | ![]() | 64 | 4 | ![]() | 3 | 4 | |||||||||||||||||||||
![]() | 4 | 1 | ![]() | 6 | 6 | ||||||||||||||||||||||
Q | ![]() | 6 | 6 | Q | ![]() | 2 | 5 | ||||||||||||||||||||
![]() | 6 | 6 | ![]() | 6 | 7 | ||||||||||||||||||||||
2 | ![]() | 3 | 3 |
gollark: I can check on my setup.
gollark: I think the sides work too.
gollark: The reason for the first thing is that remote wrapping/peripheral listing/whatever else is actually implemented in Lua using modems' `callRemote` (and other things), and only descends the "peripheral tree" one level because that's all it has to in vanilla CC.
gollark: The only important constraints I know of is that the OC relay must be directly adjacent to the computer (unless you program around this) and that you can't connect to the top of the 3D printer.
gollark: I think it's just that you can't connect stuff to the top.
References
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.