0
Facing one issue during two node RAC setup in Laptop. .runinstaller at first showing the "DISPLAY CAN NOT SET ERROR". Then after sort this out by setting display it is not shwing any popup so that I can proceed to next step.
History :- Before reaching this step I was facing another issue with oracle linux gnome display. So from the boot screen, used the cntr+alt+tab and opened the gnome display with startx as root user. So basically running runinstaller in X terminal as I opened the gnome DISPLAY as STARTX.
runinstaller is stucked
./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 415 MB. Actual 11216 MB Passed
Checking swap space: must be greater than 150 MB. Actual 4479 MB Passed
What I have tried:- I have tried lots of things to sort this out from last 24 hours.
1st thought:- Tried with the mobaxterm or putty through ssh. For that set the ssh port in linux as 22 in the /etc/ssh/sshd_config. Then disabled the firewalld in linux. appropriate changes also made in selinux. Putty is showing connection refused. I am pasting all my outputs below.
So basically I am facing two problems. 1> unable to launch .runinstaller. this is the main problem.To sort this out I am facing the below mentioned problem. 2> Unable to connect to linux from putty. I am using virtual box and host is windows 10. from windows I can ping to 127.0.0.1 .
sh example.com -X -v
output:-
OpenSSH_7.4p1, OpenSSL 1.0.2k-fips 26 Jan 2017
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 58: Applying options for *
debug1: Connecting to example.com [93.184.216.34] port 22.
ifconfig
output:-
enp0s3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.56.71 netmask 255.255.255.0 broadcast 192.168.56.255
inet6 fe80::42ec:8d8f:412f:80b0 prefixlen 64 scopeid 0x20<link>
ether 08:00:27:ef:65:d8 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 45 bytes 5400 (5.2 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
enp0s8: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.10.1 netmask 255.255.255.0 broadcast 192.168.10.255
inet6 fe80::4347:1d9c:1ea9:4d43 prefixlen 64 scopeid 0x20<link>
ether 08:00:27:21:7a:89 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 45 bytes 5394 (5.2 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
enp0s9: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.0.4.15 netmask 255.255.255.0 broadcast 10.0.4.255
inet6 fe80::21eb:7039:c6d1:1145 prefixlen 64 scopeid 0x20<link>
ether 08:00:27:c8:5a:c8 txqueuelen 1000 (Ethernet)
RX packets 107 bytes 125890 (122.9 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 115 bytes 11626 (11.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 2115 bytes 208941 (204.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 2115 bytes 208941 (204.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255
ether 52:54:00:ae:f2:f8 txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Tried to connect to 127.0.0.1 through putty, but showing connection refused. port used 22.
hostname -i
showing 192.168.56.71