0
I have two network lan card . each network interface connected with different subnet , each network interface has own wan connection . for example
Network interface 1 configuration
ip : 192.168.10.188
netmask : 255.255.255.0
gateway : 192.168.10.1
Network interface 2 configuration
ip : 192.168.1.14
netmask : 255.255.255.0
gateway : 192.168.1.1
When i select both network interface and do bridge i don't get any internet connection at all
How can i make bridge for the two network and get internet connection ?
Note : the reason i want to make bridge connection is to double my internet speed by combine both internet interfaces
if i am not the only one on both network and if i enable ICS on Network interface 2 , any computer in Network interface 1 will be able to connect to network interface 2 through my computer right ? – iLinux85 – 2016-01-15T06:41:32.933
the reason i want to make bridge is to double speed of my connection i add this in question as note – iLinux85 – 2016-01-15T06:50:49.327
Double speed will not work, because from your computer you will initiate 1 session and this will not be treated as single session on 2 WAN. This is more bandwidth not a speed. – manjesh23 – 2016-01-15T07:21:25.807
You need to look at going down the road of a DUAL WAN router with two Ethernet WAN ports to combine WAN's. This will not work. – CharlesH – 2016-01-15T07:53:18.633