Questions tagged [t1]
31 questions
1
vote
1 answer
Same network subnet across T1 or T3 leased lines?
Suppose I have a bunch of facilities, each with a /16 network under the 10.0.0.0/8 private address range. For example, my head office is 10.0.0.0/16, and we have two branches 10.1.0.0/16 and 10.2.0.0/16.
Can I use these network addresses across…
![](../../users/profiles/144887.webp)
Chris
- 27
- 1
1
vote
1 answer
Ideas for adding a second internet connection to existing network?
I have a remote site with a T1 connection tied back to a main location. This provides access to the servers at the main location and also provides internet access via the main location.
The problem is that it is becoming too slow and I want to…
![](../../users/profiles/41580.webp)
Scott Szretter
- 1,860
- 11
- 42
- 66
1
vote
1 answer
Cisco 1760 T1 Setup
My 1760 has a WIC1-T1 card in Slot 0 and the slot 0 "OK" light is lit. When the router boots it shows that it sees the T1 card. I would like to configure my T1. I received the following details from my ISP:
* Removed IP's
IP Version: IPv4
Router…
![](../../users/profiles/66679.webp)
Joseph
- 13
- 3
1
vote
2 answers
CSU/DSU reccomendation
I need a CSU/DSU to terminate a T1 from our new ISP. It needs to support PPP encapsulation and must have an ethernet output so that we can connect it directly to a switch. What device would you suggest? Thanks!
![](../../users/profiles/12510.webp)
Citizen Chin
- 532
- 1
- 12
- 21
1
vote
9 answers
Need solutions in sharing a 3Mb/768Kbps DSL line to 60+ users and faster bandwidth
Two parts.
Part 1:
We currently have 2 DSL Lines with 3Mb/768Kbps speeds load balanced for 60+ users. Accessing the Internet is borderline unusable. The simple solution would be to get a faster DSL Line but the highest DSL package is 6Mb/768Kbps,…
![](../../users/profiles/34993.webp)
elistp
- 79
- 5
1
vote
4 answers
ADSL to T1, Is it worth it for us?
The company I work for has roughly 45-55 simultaneous users (local and remote/VPN) logged in at a given time. We currently subscribe to an ADSL connection but we have been experiencing slower upload/download speeds as our number of users increase.…
Jack Hickerson
1
vote
2 answers
fax server farm architechture
I'm not sure this is the right forum for this, but it's not Stackoverflow so...
I'm trying to figure out an architecture to solve the following problem, maybe someone here can help:
I have a T1 with 23 fax lines coming into the building. I have a…
![](../../users/profiles/15727.webp)
Brian Postow
- 182
- 1
- 10
0
votes
1 answer
WiMAX vs a real T1
Our main office currently runs on an unreliable pair of bonded T1s in a somewhat remote area. Our lines have issues about 3 - 4 times a year (esp. after rain) which no one seems to be able to fix. Our only other option in our area is WiMAX.
What do…
![](../../users/profiles/1672.webp)
Andrew Cholakian
- 876
- 1
- 6
- 12
0
votes
1 answer
How to segregate network devices between several T1s and a Cable connection?
So, I'm working on setting up a call center. Our outbound calls will be going to an off-site dialer so they'll be going over the internet as data (VoIP?). Then we have our customer service department, which will be, well, whatever they do...
My…
![](../../users/profiles/50348.webp)
Gup3rSuR4c
- 661
- 2
- 13
- 29
0
votes
1 answer
Cisco E1/T1 Time Slot
What is exactly the Cisco's E1/T1 time slot?
How do I configure them?
![](../../users/profiles/58791.webp)
Andre
- 1,333
- 4
- 18
- 31
0
votes
1 answer
Siemens se5940, Factory Reset? Reconfig?
I have inherited a Siemens se5940 T1 gateway that I would like to reset and put into use. I have been looking around for a manual but I'm not having much luck. Is anyone aware of a manual that can be downloaded? I need to reset the unit and…
![](../../users/profiles/49646.webp)
dkirk
- 233
- 3
- 7
0
votes
3 answers
T1 Line Proper Setup, Routers
I'm a webguy, not a server guy -- but I'm working in an office that just got a T1 line installed. It comes into the house via a glass covered box with Adtran logos on it with 4 ethernet sockets underneath it. I'm supposed to use socket one to get…
![](../../users/profiles/49593.webp)
swt83
- 109
- 1
- 3
0
votes
4 answers
How many avg. users will a T1 line support?
The business incubator our company is enrolled in is moving to a new building. There has been talk about get a three T1 lines (4.5Mbps) as opposed to business class cable internet (10-50Mbps).
How many average users will a T1 line support?
Edit:…
![](../../users/profiles/16324.webp)
Eddie
- 121
- 1
- 5
0
votes
1 answer
Is it a bad idea to run voice and data over the same bonded T1?
Currently we have a T1 which we use for both our voice and data.
We are looking at getting a bonded T1 but have been told by the provider that it would be a bad idea to run both voice and data on a bonded T1 (Multilink PPP) and that we should…
![](../../users/profiles/37337.webp)
Nate Pinchot
- 257
- 1
- 3
- 10
-1
votes
1 answer
configure two routers to one T1
We have a router hooked up to our T1, and the router went down the other day and caused our phones to go down so i had an idea to use a backup router. I know very little about networking. Is it possible to hook up 2 routers to a T1 so that if one…