Questions tagged [scsi]

Small Computer System Interface (SCSI) is a set of standards for physically connecting and transferring data between computers and peripheral devices.

The physical SCSI interfaces - originally used to attach peripherals like disks, scanners and tape drives - have mostly been superseded by and .

The SCSI command set that was originally defined for (parallel) SCSI buses has been carried forward with minimal change for use with , , Serial Attached SCSI , and other transport layers.

201 questions
0
votes
1 answer

Fiber tape changer missing on lsscsi

I'm configuring a server with Bacula to manipulate backups on a Dell TL4000 connected to the server via Fiber. During the configuration of the Bacula Director I've accessed the bconsole to see if the configuration was being applied. Once I've exited…
Brosig
  • 111
  • 3
0
votes
1 answer

Slim ATAPI or Slim SATA to SCSI HD50

Is it at all possible to connect a Slim-ATAPI connector (CD-ROM drive) to SCSI HD50? I have an internal CD-ROM drive with a Slim-ATAPI connector, that I would like to connect to an older 50 pin SCSI device - if…
GDN9
  • 101
  • 1
0
votes
2 answers

VMWare ESXI 6.5 VM cannot boot with second HDD

I have a 6.5 VM running off a local datastore, no network involved except for the web UI, no vCenter, dead simple. With a single Virtual disk, all is fine. If I want a second virtual disk (another .vmdk on the same datastore) then I can add this…
fishkake
  • 35
  • 1
  • 6
0
votes
1 answer

RAID SCSI Hard Drive: 73GB vs 72.8GB

I know that this may be a stupid question to some but I don't often work with SCSI drives with what seems to be non-standardized sizes compared to SATA drives. I currently have a RAID1 of two drives on an old Dell server and one of the drives has…
Jacob S
  • 101
0
votes
2 answers

Dell PowerEdge 1750/1850 using *SATA*?

we're currently looking for a cheap, but reasonably powerful, server to collect analytics and act like a firewall for our Web Application server. It seems a PowerEdge 1750 or 1850 would do the job nicely, but they both appear to only accept SCSI…
Django Reinhardt
  • 2,256
  • 3
  • 38
  • 55
0
votes
1 answer

cfgadm hangs when attempting to attach SCSI device

I'm trying to hot plug a EXB-8900 tape drive into Solaris 10 and having issues. Here's the process I follow. Please note this has worked: cfgadm -x insert_device c4 yes at the first prompt to suspend SCSI activity on the c4 HBA. Next I connect and…
0
votes
2 answers

SCSI PowerEdge Server + pulling data off

I have a old Dell PowerEdge Server that has data on it that I need to pull off and was wondering what is the best way to do it. The size of the data is probably around 100gig. Once the data is pulled off I need to read it on another computer. Should…
chopps
  • 113
  • 4
0
votes
2 answers

80 pin SCSI Raid Controller to SATA SSD's on IBM e336

I have an Old IBM e336 1U Sever. Currently the only Hard drive in the system is a Ultra160 SCSI drive. This drive is old and making some noises indicating that its life is going to end soon. Though my data is backed up I need something to run the…
JimmyJazzx
  • 125
  • 6
0
votes
2 answers

Extra storage space for HP Proliant DL380 G5

I have a HP Proliant DL380 G5, SAS Hard-disk no space left, I am planning to buy HP StorageWorks MSA20 Sata - thus, a total of 6TB area will be formed. I do not know how to do connection server with storagework. I guess I need to buy them; One…
Editor
  • 111
0
votes
1 answer

Can an IBM ServeRAID 4mx controller work on a non-IBM server?

I have some IBM ServeRAID 4mx controllers on some aging IBM x360 servers (Pentium III 1.5 ghz CPUs); I also have a SCSI disk array with two ports, which can be attached to those controllers; and I have two more recent servers which would be a lot…
Massimo
  • 68,714
  • 56
  • 196
  • 319
0
votes
2 answers

What kind of interface card do I need for a SCSI tape library?

I've recently come into possession of an Arcvault 24, a combination tape libary/LTO4 tape drive unit. It connects via a U320 SCSI link using HD68 wiring. The server that this library will be connected to is a HP DL160 G6. This device does not have…
Mikey T.K.
  • 1,367
  • 2
  • 15
  • 29
0
votes
1 answer

sas sense key data protect

I have several Hitachi Ultrastar SSD400M Model #HUSML4040ASS601. They had a block size of 520 and I was able to successfully format all but one of them using sg_utils' sg_format to 512. However, one of the drives reports "sense key data protect".…
jwc
  • 141
  • 7
0
votes
0 answers

3 x 146 GB scsi hdd data recovery

Bought a new server with sff sata hdds. Before I got a chance to install the new server the old HP ProLiant DL385 Opteron 8218 with 3 x 146 gb scsi hdds has failed. I think the hard discs themselves are fine. Is there a way to get the data off the…
svimes
  • 21
  • 3
0
votes
1 answer

/sys/class/scsi_host/host0 not found - get it back without reboot?

I have a oracle linux 5.8 virtual server (virtualized via oracle virtual manager, which is using xen), which has a couple of luns attached via scsi. Now I wanted to attache more luns, but found that /sys/class/scsi_host/host0, which is the scsi host…
Isaac
  • 1,195
  • 3
  • 25
  • 43
0
votes
1 answer

Backing up data from DELL Perc4 LSI controller

We had a failure of a critical server this morning. Most likely the PSU failed, now we need to Backup the data to another system. The server in question is a DELL 2800, featuring a built-in PERC4E SCSI controller with two hard disks (RAID1). Since…
HannesS
  • 322
  • 5
  • 17