Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [mikrotik]

Latvian manufacturer of computer networking equipment, known for the Linux-based operating system known as MikroTik RouterOS.

The main product of MikroTik is a Linux-based operating system known as MikroTik RouterOS. Installed on the company's proprietary hardware (RouterBOARD), or on standard x86-based computers, it turns the computer into a network router and implements various additional features, such as firewalling, virtual private network (VPN) service and client, bandwidth shaping and quality of service, wireless access point functions and other commonly used features when interconnecting networks.

http://en.wikipedia.org/wiki/MikroTik

302 questions
0
votes
2 answers

Mikrotik: any way to nat one public IP to another public IP?

Is there a way to do a simple task, NAT from one public IP and specific port to another public IP and another port, reason to do this is that 2nd IP is blocked by our client's ISP, and the 1st IP (on Mikrotik) is not blocked. I heard about linux…
Alexander Shvalov
  • 1
  • 1
  • 2
0
votes
0 answers

Issue with Fail2ban and Mikrotik Firewall

OS: CentOS 7.1 At my organization we are currently assessing using Fail2ban with the firewall on our Mikrotik router. I want Fail2ban to communicate any IP flagged as banned to the Mikrotik firewall, creating a new firewall rule. There are three…
glaforge
  • 9
  • 1
0
votes
1 answer

MikroTik Configuration - Add a Public Wireless Router (internet only) to Office LAN

Goal Provide internet access for employees' personal devices without providing access to the internal network. Equipment Netgear WNDR4500v2: Wireless router intended for the guest network (has wireless isolation feature) MikroTik RB2011Ui AS-RM:…
Jack
  • 209
  • 3
  • 10
0
votes
1 answer

Couldn't add New Bridge NAT Rule - ip matchers valid only for ip ethernet protocol

I am following this tutorial to set up port forwarding. However, when I attempt to apply my rule, I get the above error message. Here is the rule that I am trying to add: see this image
Erik Johnson
  • 123
  • 2
  • 11
0
votes
2 answers

Mikrotik massively add static routes

I'm wondering of it is possible to add static routes to Mikrotik massively. For example, I have list of Facebook servers which I need to route and how can I add them in terminal by one or 2 commands rather than entering manually in WinBox? Thank you…
Senator14
  • 87
  • 1
  • 9
0
votes
1 answer

Mikrotik main IP

On mikrotik (CCR-1009, v6.0), I use 2 interfaces : eth1 for WAN and eth8 for LAN. On LAN interface 2 IPs: 192.168.22.1/24 as main and 10.10.10.1/24 for routing pptp from WAN. I also have some pptp/l2tp and IPSec connections from WAN port. For…
Dmitry Maevskiy
  • 1
  • 1
0
votes
1 answer

Setting up mikrotik router with native IPv6 with only a single /64 block

I am at a colo provider that supplies a single IPv6 /64 block. The goal was to route the provided /64 of IPv6 addresses to the hosts behind the Mikrotik running RouterOS 6.24. Some Mikrotik examples and that I found always had the user getting a…
craigdfrench
  • 158
  • 8
0
votes
1 answer

MIKROTIK - Two LANs connected with switch

I have a very simple network. I have two LAN networks (192.168.2.0/24 and 192.168.3.0/24) connected via a router at each site and the routers are connected via a switch. http://postimg.org/image/3y1uysszn/ The routers are MIKROTIK, the switch is…
Gregor
  • 11
  • 1
  • 1
  • 4
0
votes
0 answers

Mikrotik OpenVPN Server dropping OpenVPN Connections - Connection reset, restarting [0]

I was able to connect from within my local network connection but from remote site locations the connection looks to be dropping. Could this be a possible firewall issue? I see a connection but it does not stick. This is my first time playing around…
Jason
  • 3,821
  • 17
  • 65
  • 106
0
votes
1 answer

Can't access VPN server through ADSL modem

We have mikrotik router in our office which takes ethernet WAN(RJ45 plug) as input and connect LAN network. We switched to ADSL connection from fibernet connection. Now With ADSL connection I can't connect to mikrotik router since there is no ADSL…
niren
  • 253
  • 1
  • 5
  • 11
0
votes
1 answer

Managing VPN-based users/VLAN access to a test environment

I'm involved in the setup of a demo/user lab environment comprising several racks of server kit. The idea is that potential hardware/software customers can be given a VPN account that will allow them into specific kit only. The main challenge is…
Linker3000
  • 668
  • 1
  • 5
  • 14
0
votes
1 answer

MikroTik - can't access webfig from external / can't SSH into router from external ip

Ok, here's the deal. Let's say that my public facing IP is 10.0.01. I can't webfig into 10.0.01 from external and can't SSH into mikrotik router from external IP. I can do it if I am physically connected to the router (on the same lan). It allows me…
fizzy drink
  • 375
  • 4
  • 8
  • 22
0
votes
1 answer

Joining two networks over internet with same ip range

We have two offices in a single Windows 2003 domain and sharing same IP range (no overlapping). Every office has its Microtik router as gateway. Thing is, first office has a solid wired internet connection from ISP, and second office has only a 3G…
Roman Doroshenko
  • 5
  • 3
0
votes
1 answer

Mikrotik- a subnet route is ignored

I have the following schema: Site1 (Mikrotik) Static WAN IP - 192.168.28.11/28 dynamic connected route - 192.168.28.0/28 --> 192.168.28.1 (route1 for short) static connected route - 192.168.28.240/28 --> 192.168.28.1 (route2) Site2 (cheap simple…
user266784
  • 11
  • 3
0
votes
0 answers

HotSpot: Session Failed after Login with Phone Embedded Browsers

Some phones have their embedded browser when they are connecting to HotSpot. (For example in iPhone (iOS) or Windows Phone 8.1). The problem is after login into these browsers (with embedded browser), the session failed in the phone browser (For…
Vahid
  • 103
  • 6
1 2 3
…
20 21