Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [routeros]

Linux-based operating system known also known as MikroTik RouterOS that runs on x86 and RouterBOARD systems.

Major features:

  • Powerful QoS control
  • P2P traffic filtering
  • High availability with VRRP
  • Bonding of Interfaces
  • Improved interface Smaller and Less resource-hungry
  • Tons of other new features
  • Advanced Quality of Service
  • Stateful firewall, tunnels
  • STP bridging with filtering
  • High speed 802.11a/b/g wireless with WEP/WPA
  • WDS and Virtual AP
  • HotSpot for Plug-and-Play access
  • RIP, OSPF, BGP, MPLS routing
  • remote WinBox GUI and Web admin
  • telnet/mac-telnet/ssh/console admin
  • real-time configuration and monitoring

For more information, see:

http://download.mikrotik.com/what_is_routeros.pdf

http://www.mikrotik.com

74 questions
5
votes
1 answer

How to make connections answer from the same gateway they entered in RouterOS?

I have a MikroTik RouterOS 6.23 device, and my network is as follows: Router | |-- bridge1_LAN (wlan1 + ether1) (192.168.0.210) -- LAN (192.168.0.0/24) | Here is where computers are. Those include some servers and some users. | Users…
Yajo
  • 292
  • 2
  • 3
  • 8
4
votes
2 answers

Use Mikrotik as a switch and route subnets through another router

I've got the following network configuration: Comtrend 5813 FTTH Router, connected to WAN, let's say in 192.168.50.x (being .1 router's address) and a DHCP server active, giving addresses from .150 to .200 Mikrotik 951G-2HnD connected to the…
F.D.F.
  • 155
  • 1
  • 1
  • 6
4
votes
3 answers

How do I set up RouterOS to use web proxy on another machine?

The RouterOS docs show how to transparently proxy all web traffic via the HTTP proxy built into RouterOS: /ip firewall nat add in-interface=ether1 dst-port=80 protocol=tcp action=redirect to-ports=8080 chain=dstnat /ip proxy set enabled=yes…
Tim
  • 257
  • 4
  • 5
  • 12
4
votes
2 answers

WiFi: Frequencies that map to non-overlapping 2.4 GHz channels 1,6 & 11

I'm configuring a wireless router. I know the non-ovelapping channels are 1,6 & 11. However, my router only specifies frequencies that I can select, not channels. What are the frequencies that map to channels 1,6 & 11?
F1Linux
  • 335
  • 5
  • 12
3
votes
2 answers

Can't get a serial console on MikroTik RB4011iGS+

I am trying to connect to the serial console of my MikroTik RB4011iGS+. I might be missing something obvious, but I can't seem to get a terminal (or anything else). Relevant documentation…
Valmiky Arquissandas
  • 474
  • 1
  • 4
  • 16
3
votes
1 answer

IPv6 subnetting a dynamic /56 prefix

I read How does IPv6 subnetting work and how does it differ from IPv4 subnetting? but my question was not answered there. I'm upgrading our IPv4 network to IPv6. Currently, our NAT gateway splits our one IPv4 address into 2 private subnets, our main…
Old Pro
  • 1,335
  • 10
  • 20
3
votes
1 answer

How to setup an encrypted L2-Tunnel using MikroTik Routers?

What I would like to achieve I want to securely spread an existing internal subnet over multiple buildings. That means that I have two locations with virtual machines that need to be within the same subnet. The idea is that the virtual machines…
SDwarfs
  • 385
  • 4
  • 15
3
votes
2 answers

NAT to two different servers on the same port via hostname with Mikrotik RB2011

I have a Mikrotik RB2011 router, running RouterOS which connects to the internet via a static IP. In my lan I have two different servers, one that is on IP 192.168.89.11 and another on 192.168.89.12 My DNS (on cloudflare) resolves both…
pataroulis
  • 143
  • 1
  • 2
  • 11
3
votes
2 answers

Routing from mikrotik two IP addresses to same gateway

I have 2 static addreses (a.b.c.72/24 and a.b.c.128/24) on gateway1 and gateway2 interfaces. ISP have one gateway a.b.c.1 . I can use a.b.c.72 only on gateway1, a.b.c.128 only on gateway2. How to get a.b.c.128 working? I want route some local…
eri
  • 274
  • 2
  • 4
  • 15
3
votes
2 answers

MikroTik IPsec client Fortigate 'Received ESP packet with unknown SPI.'

We have a client with 6 sites using IPsec. Every now and again, possibly once a week, sometimes once a month, data just stops flowing from the remote Fortigate VPN server to the local MikroTik IPsec VPN client. In order to demonstrate the symptoms…
Eugene van der Merwe
  • 435
  • 4
  • 9
  • 21
3
votes
1 answer

MIKROTIK - set proxy authentication

Is it possible to set mikrotik authetication to be used for set the connection of other applications to internet using mikrotik proxy? For example connect miranda IM using mikrotik proxy server: I've tried to use hotspot login, bypass hotspot for…
gaffcz
  • 145
  • 1
  • 8
3
votes
2 answers

Manually set IPv6 neighbor's MAC address in Mikrotik's RouterOS

I have an interesting problem. An ISP of ours started providing native IPv6 on their network. They provided us with a /56 prefix and a /126 linking segment (::1 being their endpoint and ::2 being ours). However, the ISP's DSLAM does not support…
user81458
2
votes
4 answers

How to hack airport extreme to support USB 3G modem?

Has anyone out there ever tried to hack the Airport Extreme, specifically with regard to the USB port? There are many cellular routers available that provide WiFi sharing of a USB modem link. However, instead of buying yet another router, I'd like…
Mike Caron
  • 133
  • 1
  • 3
  • 7
2
votes
2 answers

RRAS Server 2012 R2 Not Assigning Network Info or if it does not passing NAT

I wouldn't bother with this for any other reason than the fact that the speeds I get are worth it. Cable Modem (Bridge mode) - Server 2012 R2 (RRAS) - Linksys EA2700 (Bridged as Switch) My issue is I've followed many guides and either the guide…
Zeenjayli
  • 43
  • 1
  • 8
2
votes
2 answers

Does exist a curl equivalent command in routeros?

Just starting with routeros and after searching the official docs just fetch appears I need to do a POST request to REST API but I cannot find any curl like command. Is it possible to install curl somehow?
Jaime Agudo
  • 153
  • 1
  • 7
1
2 3 4 5