Questions tagged [imaging]
124 questions
1
vote
2 answers
Is it possible to capture an Image with WDS without local save
I'm using a windows deployment server capture boot image(running on win2k8server) to capture a laptop.
Is there anyway to capture the image straight to the WDS server without saving the image locally? The next button is grayed out until I give it a…
![](../../users/profiles/360026.webp)
Daniel Ogburn
- 113
- 5
1
vote
1 answer
LiteTouch deployment fails when BIOS is set to IDE but works when set to AHCI
I have an HP Z420 Workstation with a single 500GB SATA drive that I spent all day imaging to Server 2012 R2. Part of the deployment process is selecting if you want to wipe the drive. I selected yes every time because the drive was blank. It failed…
![](../../users/profiles/315193.webp)
Tim
- 145
- 2
- 11
1
vote
1 answer
Fastest method to deploy Linux to large numbers of workstations
A nonprofit has received a donation of a large number (>100) decommissioned workstations. What would be the most efficient method of taking a standardized ISO image of a Debian Linux distribution (for example, Ubuntu LTS 14.x), and installing that…
![](../../users/profiles/335306.webp)
Yaaqov
- 23
- 3
1
vote
0 answers
How can I create a bootable media image that provides automated recovery?
I have clients/employees who use company workstations and want to create a dedicated restore partition on the drive such that when they boot into it, it boots into an automated recovery sequence, and restores a particular partition to a particular…
![](../../users/profiles/321731.webp)
Jaigus
- 111
- 1
1
vote
1 answer
Automate the OOBE setup steps for Windows 10
I am not sure if this is possible. I have been reading a bit about answer files but that seems to be more for the actual installation of windows to me.
This is the process we currently use:
Install windows
Go into audit mode
Install required…
![](../../users/profiles/320722.webp)
tyelford
- 255
- 2
- 11
1
vote
3 answers
Can I run Windows Deployment Services from start to finish without using the network?
I'm fairly new to the Imaging world, and I'm going to be imaging some Dell Venue tablets that don't support PXE booting. I've been reading up on WDS and see that I could potentially create something called a discover image in order to effectively…
![](../../users/profiles/22105.webp)
soapergem
- 719
- 4
- 13
- 29
1
vote
0 answers
Is it possible to host a FOG Project server on Amazon EC2?
I am totally new to imaging in general and have been looking into different options. The FOG Project seems especially appealing because of cost. My company makes pretty extensive use of Amazon Web Services, including hosting all of our server-side…
![](../../users/profiles/22105.webp)
soapergem
- 719
- 4
- 13
- 29
1
vote
2 answers
How to execute bash script through pxe boot
Can any one tell me how to execute bash scripts via pxe boot. What I am trying to do is when Raw Server boots up I want to deploy cloned image over hard disk via PXE boot.
I am aware that there are some tools like Fog which does similar thing. But I…
![](../../users/profiles/298626.webp)
Kapil
- 39
- 1
- 6
1
vote
1 answer
How to stop DISM resetting activation?
I have a lab of virtual (Windows 7 Ultimate) machines and want to create a Windows image using MDT 2013 / DISM.
When I use the DISM capture-image on the reference machine and DISM apply-image on the 'new' virtual machine all works fine, except that…
![](../../users/profiles/275875.webp)
Tim
- 11
- 2
1
vote
1 answer
Launch Windows PE on a remote computer
We use WDS to image and reimage (refresh) computers (WDS only, no MDT).
A technician can PXE boot to WDS and essentially lite touch the image.
What is the best way to achieve this from a remote location on a PC that already runs Windows 7, without…
![](../../users/profiles/240924.webp)
MrBeatnik
- 83
- 1
- 8
1
vote
1 answer
Best imaging practices (specifically sysprep to a .wim & network deployment)?
Note: As you may have seen in my other question regarding the data integrity of a .wim, I know this is a very "rigged" method of doing things. I've been the one heading up that whole area for our department, but given how fast we've been needing…
![](../../users/profiles/217824.webp)
PCI-J
- 21
- 2
1
vote
1 answer
Full system backup - different drive types
I have workstations I deploy regularly that all have the same configuration. The problem I'm encountering is; the primary Windows 7 x64 drive is a standard 120gb SSD with a NTFS. The secondary development drive is a 4tb GPT dynamic disc.
The…
![](../../users/profiles/24910.webp)
DevNULL
- 161
- 1
- 1
- 7
1
vote
3 answers
Permalink for latest version of browsers?
We use a deployment tool when we image new systems and up to now we have always downloaded the latest versions of Firefox, Flash, Acrobat, etc, saved them on a server and then pointed to them during the imaging. The problem with this is that those…
![](../../users/profiles/188417.webp)
vrtigo1
- 861
- 3
- 10
- 17
1
vote
1 answer
How to create a POST OS custom task sequence for an out-of-the box laptop
I'm playing around with MDT with the intent of facilitating the rollout of new laptops.
As we turn on the new laptop for the first we want to go through with the standard windows OEM installation.
Afterwards we just want to run a post os task…
![](../../users/profiles/44325.webp)
Datapimp23
- 181
- 1
- 3
- 21
1
vote
2 answers
Passing a value from one Task Sequence Variable to another during OSD
We are playing around with Task Sequence variables in SCCM 2012 Sp1. We are reimaging Operating systems wirelessly and one of the problems we've run into is that when assigning the computer name the computer cannot connect to AD to query the…
![](../../users/profiles/39095.webp)
Joe Taylor
- 498
- 5
- 12
- 26