1

I have an HP Z420 Workstation with a single 500GB SATA drive that I spent all day imaging to Server 2012 R2. Part of the deployment process is selecting if you want to wipe the drive. I selected yes every time because the drive was blank. It failed numerous times with the error LiteTouch Deployment failed, Reason Code -214746259 0x80004005. I exited to a command prompt and ran these commands:

diskpart
select disk 0
clean

Then I restarted the deployment. Still failed. I checked and rechecked BIOS settings, and I saw nothing out of the ordinary, but I did see that the drive mode was set to IDE. I decided to enable AHCI to t ake advantage of the better features. The LiteTouch deployment went smoothly after that.

So my question is this: Do I potentially have an error in my deployment script that is causing the failed deployments to IDE or is this a hardware issue that I should investigate further?

Tim
  • 145
  • 2
  • 11

1 Answers1

4

The driver required by the Disk controller is not the same if it is set up as IDE or AHCI.

So I guess your deployment does have the driver for AHCI and not the driver for IDE..

JFL
  • 2,006
  • 1
  • 11
  • 16
  • This likely results from the IDE driver missing from the reference image. – vigilem Mar 02 '16 at 15:33
  • Sometimes you read an answer and it makes such perfect sense that you kick yourself for not realizing the simplicity of the solution. I totally could have seen that forest if not for all these trees! xD – Tim Mar 02 '16 at 16:49