Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [hetzner]

Hetzner Online AG is a major German web-hosting provider and data-centre operator.

Hetzner Online AG is a major German web-hosting provider and data-centre operator.

Hetzner Online successfully markets itself with an outstanding price-performance ratio in the area of dedicated servers, due to a high level of automation and through pre-configured options.

http://www.hetzner.de/en/

106 questions
151
votes
9 answers

Monday morning mistake: sudo rm -rf --no-preserve-root /

Please note: The answers and comments to this question contains content from another, similar question that has received a lot of attention from outside media but turned out to be hoax question in some kind of viral marketing scheme. As we don't…
Jonas Bylov
  • 1,623
  • 3
  • 11
  • 5
10
votes
0 answers

IPv6: Destination unreachable: Address unreachable

My server can't ping/reach any other outside. ping6 works for my local fe80::468... address as well as the 2a01:4f8..., but not for fe80::1! Errors/Troubles/Issues: ip neigh show fe80::1 dev eth0 FAILED ping6 2001:4860:4860:8888 (Google) PING…
am1
  • 211
  • 1
  • 2
  • 3
8
votes
2 answers

hetzner default nameservers not always resolving

I have couple of Hetzner 'root servers' (as they call it - dedicated co-located linux machines) and all of them experience the same problem (which i simply do not fully understand). The domain www.dnsblchile.org does not want to resolve to an IP…
Mc Bton
  • 83
  • 1
  • 5
8
votes
2 answers

DNS issue with Failover IP from Hetzner

Assume we have two servers A and B with 'real' and external IPs and we can switch the so called 'failover ip' (W.X.Y.Z) to point to a specific external IP of A or B. This works from the 'outside' and was easily done. As a background: the failover…
Karussell
  • 191
  • 2
  • 15
6
votes
4 answers

Can I connect a servers from Hetzner cloud to a vswitch

I have some dedicated root servers at Hetzner wich are connected via a VLAN using the vSwitch. Now I would like to know if you can connect servers from the Hetzner Cloud to the same vSwitch so they can communicate via the VLAN?
papanito
  • 381
  • 4
  • 19
5
votes
4 answers

Ubuntu full disc encryption on Hetzner Cloud adding add static route in initramfs

I try to setup Ubuntu with full disc encryption on top of Hetzner Cloud. I got everything to work except the network connection in initramfs. Thanks to the UI console its possible to unlock, but I need SSH (dropbear) in init. I successfully using…
user2638109
  • 153
  • 1
  • 4
5
votes
2 answers

Getting Ubuntu 16.04 on a ZFS root on a Hetzner dedicated server

By now, it's well possible to get Ubuntu 16.04 running on a ZFS root-fs. Ubuntu 16.04 has ZFS in the default package manager, and with guides like this, it's not hard to get started. However, all guides I've seen require being able to boot from a…
TinkerTank
  • 279
  • 2
  • 7
5
votes
2 answers

Can't use external IP on Hetzner VPS

I've changed my virtual server model on Hetzner recently. The new one has an external IPv4 address on which it's accessible from the internet (as it should). But I can't use this external IP in configuration: iptables rules have no effect, openvpn…
bakatrouble
  • 155
  • 1
  • 6
4
votes
1 answer

How is preferred_lft set by default for an IPv6?

On Hetzner Cloud with Debian and Ubuntu, I noticed that the default IPv6 has a preferred_lft of 0 second. It is thus "deprecated" and that leads to issues when adding another inet6, because non-deprecated ipv6 are…
stan
  • 173
  • 11
4
votes
2 answers

Hetzner's installimage script, RAID1 hard drives + SSD

I just purchased a server from Hetzner, with two 4TB hard drives and one 1TB SSD. I want to setup the two hard drives (/dev/sda & /dev/sdb) in RAID1 and install the OS on them, and have the SSD (/dev/sdc) as an extra drive. Until now, all my…
Tim Autin
  • 213
  • 2
  • 8
4
votes
3 answers

proxmox KVM routed network with multiple public IPs

I have a dedicated hosting with hetzner. Additionally i have bought a 6IP subnet. My main IP is: 148.111.111.200 My main subnet is: 255.255.255.224 My additional IPs are 148.222.222.1 to 148.222.222.6. My usage scenario is as follows: Several…
Sibin Grasic
  • 476
  • 1
  • 5
  • 19
3
votes
1 answer

How is it possible to have a default gateway outside of the network range of any interface?

I always thought that the default gateways has to be on the same network as the server/client trying to connect to the internet. However today I rented a server from Hetzner and the server is able to connect to the internet even though, as it seems…
Rick McClatchie
  • 45
  • 3
3
votes
1 answer

Is it possible to change the IPv6 address of docker0 bridge?

I'm trying to set up a docker based application on a virtual server running Ubuntu. The application is supposed to work with IPv6. No problem, I got a /64 network from my server provider, it is working fine until I start the IPv6-enabled docker…
chindocaine
  • 31
  • 3
3
votes
1 answer

XenServer - Storage XenMotion between 2 servers using direct LAN connection

I have two physical servers (recent, Haswell based machines) on which I have installed XenServer 6.5 . Both servers have two NICs. These servers are hosted at the Hetzner datacenter. I have connected a LAN crossover cable between the two servers on…
Anjan
  • 277
  • 1
  • 2
  • 14
3
votes
1 answer

ntpd servers stuck in init state when defined by hostname, but sync correctly when defined by IP address

I started having an issue on a couple of our colo servers which is causing a fair bit of head scratching. I as alerted to clock skew on a couple of servers, and when I went to investigate ntpq -=p showed the following: remote refid …
Hawmps
  • 33
  • 1
  • 3
1
2 3 4 5 6 7 8