Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [gateway]

584 questions
-1
votes
1 answer

CentOS gateway setting on startup

I'm running CentOS 6.2 on ESXi 5. The machine has 2 NICs, eth0 is connected to the Internet and eth1 to a LAN. eth0 has a single colo provided IP address, so the netmask is 255.255.255.255. The gateway is of course on a different subnet. After boot…
felixg
  • 173
  • 1
  • 2
  • 7
-1
votes
2 answers

Why do I get HTTP Error 504: Gateway Timeout on accessing public IP over Android

Question: When I start a webserver on my machine (on port 80), and then try to access it via my public IP, I get HTTP error 504 (Gateway Timeout). Why ? This only happens when I am connected to the internet via Android. When I connect via normal…
Quandary
  • 974
  • 4
  • 18
  • 34
-1
votes
1 answer

openvpn does not recover from disabling redirect-gateway

When I enable the redirect-gateway option on the server, restart openvpn, and restart the client software, the new default gateway is set on the client. When I then disable the redirect-gateway option in the server config, restart openvpn on the…
Marki
  • 2,795
  • 3
  • 27
  • 45
-1
votes
1 answer

No gateway / LAN without internet / CCTV system

I've tried to post this on superuser.com but they don't accept questions from Tor network now for more than a week so I hope I can find help here since we could say it's network administration question. :) I wanna set up home CCTV system- few IP…
johnymcdoe
  • 1
-1
votes
1 answer

Trying to setup IP addresses on my network

Here's my schema. I'm trying to set up IP addresses to be able to PING from the first floor ( etage 1 ) to the second ( etage 2). I tried setting up an IP address 192.168.233.2/24 with the gateway 192.168.233.1 to PC D , and 192.168.233.3/24 with…
xelo
  • 1
  • 2
-1
votes
2 answers

Home modem/router IP address middle of DHCP pool?

I have a home modem/router/gateway. To make it less findable with hard-coded bad-actor scripts running inside my network, I wanted to put the modem/gateway IP address in the middle of the DHCP pool of addresses instead of ".1" (10.0.0.50, with a…
Brian
  • 1
  • 1
-2
votes
1 answer

D'DNS as Default Gateway

I need a help! I have router A on 1st location and I have router B on 2nd location - they are miles away !! Can I set DDNS domain name of router A -"server" as default gateway for router B? YES or NO. How to do it; if you can't put DDNS as letters…
Nenad
  • 1
-2
votes
1 answer

Default Gateway is skipped when adding an additional IP address

I'm currently faced with an issue were when adding an addition IP address, Tracert results to intended IP address but skips the gateway and goes straight to that IP as the 1st/last hop.But when I remove the added IP, then the gateway appears This,…
Jabulani Sibeko
  • 41
  • 3
-2
votes
1 answer

How to figure out what is the gateway and interface in routing table

So I've got this simple yet very confusing at least for me problem, to determine what is the interface and ip next gateway from a router to network. Lets say we got setup like this - . And if I want to set the route from router R1 to network…
Cr1ms0nStraY
  • 3
  • 2
-2
votes
2 answers

How to route all client traffic without setting it's gateway

I've 3 devices where for some reasons I cannot change their default gateway and neither their ip and netmask. All the devices has the following ip: 169.254.11.22 and netmask 255.255.255.0 I want to put a router for each client to "change" their…
Andrea Cattaneo
  • 127
  • 4
-3
votes
2 answers

How do i create a 'layer' in between my router and a user connecting to it

Like when you go to starbucks the first thing you see if you go to their wifi is "Welcome to starbucks, please accept our terms". Or also at most airports, it makes it impossible to surf until you accept their terms. Furthermore, what is this…
Tallboy
  • 177
  • 2
  • 14
-4
votes
1 answer

can't access 2nd Router on my network

I have a 2nd Router (192.168.1.71) connected to the Primary Router (192.168.1.1) use it for WIFI only purpose, but I can't access it (while connected to the WIFI), I am able to ping it. any ideas on what I can try? when I go on 192.168.1.71 on…
wlin
  • 95
  • 1
  • 4
-4
votes
2 answers

Getting IP addresses through sniffing

Is it possible to know the gateway address of a wireless AP that I'm not connected to through sniffing? Airodump-ng can show MAC addresses of the AP and the clients associated but doesn't show IP addresses. Is there a way around this?
Basil
  • 1
  • 1
-4
votes
1 answer

Not getting faster Internet speed after aggregation of two Verizon gateways

I want to increase Internet speed by using two Internet gateways instead of one. I have two Verizon home-Internet-LTE gateways. Both are connected to a TP LINK TL-SG116 Switch, which has IEEE802.3ab (link aggregation) and also 802.3 802.3i 802.3u…
Doug Null
  • 236
  • 1
  • 3
  • 10
1 2 3
…
38
39