Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [firebox]

16 questions
2
votes
1 answer

Loading website on port 1433 without using ":1433"

Boss wants me to set up a website so that by typing "https://www.example.com" (no :1433) in the address bar of a web browser, the request will go through port 1433 on a Watchguard Firebox to an apache web server with domain-ssl.conf…
NeghVar
  • 21
  • 1
2
votes
2 answers

Watchguard firebox: public IP addresses behind firewall with as much usable IP addresses as possible

Our ISP assigned us 16 public IP addresses that we want to assign to hosts behind a Watchguard firebox x750e. The IP addresses are: x.x.x.176/28 of which x.x.x.177 is the gateway. The hosts will be running software that needs to be directly assigned…
lbarbosa
  • 123
  • 1
  • 5
1
vote
0 answers

Watchguard Web UI Authentication with Active Directory user

Our WatchGuard firebox is configured to use active directory to authenticate VPN users. With Watchguard products, is it generally possible to use active directory to authenticate users that are attempting to configure the firewall itself, via the…
Ronnie Overby
  • 681
  • 2
  • 12
  • 24
1
vote
0 answers

Firebox x700 Reset to Default Not Working

I found a site that explains how to reset a Firebox 700 series back to default as you can see from this link: https://www.hashdoc.com/documents/7502/how-to-default-a-watchguard-firebox-700-or-x700 Everything works fine. I setup a separate…
stevenvog9
  • 11
  • 4
1
vote
2 answers

Watchguard Mobile VPN with SSL - user can't connect - failed to open shared memory for openvpn command (error: 2)

I have a problem with my Watchguard VPN. I've set up the device for SSLVPN (added policies, users, a group etc.) according to this description from the Watchguard docs. The authentication itself works (no error about wrong login info with proper…
Christian
  • 199
  • 1
  • 2
  • 9
1
vote
2 answers

How do I correct/set/syncronize time on Watchguard Firebox X500?

Looking at the logs on my firewall in realtime it appears that the time is slow by about 13 minutes. I might not have noticed but I'm troubleshooting a lan to lan VPN connection. It may be purely cosmetic or it might actually be an issue if the time…
pplrppl
  • 1,242
  • 2
  • 14
  • 22
1
vote
0 answers

Webservice randomly dropping connections - possibly due to firewall nonevent data?

I have a hosted webapp which requests data from a REST webservice in our office. Each page calls one (or several) webservices, which go from our host, via our firewall (a Watchguard Firebox) to a server in our office. All of a sudden, the app has…
adam
  • 243
  • 2
  • 6
1
vote
1 answer

BOVPN on Firebox XTM 21 not connecting to Firebox X 500

I have set up a BOVPN on XTM 21 and it is not showing or connecting to the X500 on the other side. I have looked at the traffic logs on both sides and there are no records of it even reaching the other end? I have verified both static IP Address…
msindle
  • 605
  • 8
  • 26
1
vote
1 answer

Firebox XTM21 failing to route

So I have bought a new XTM 21 appliance from Watchguard. This god awe-full thing will not route any traffic no matter what rules I apply in the firewall setup. When the syslog doesn't crash as I'm viewing it I can see all the traffic being blocked…
Digital ink
  • 490
  • 10
  • 22
1
vote
1 answer

Can I setup NAT for the same service, two public IPs on different routers to the same private IP?

This might be needlessly complex, but here goes. I've got two Firebox x550e devices. The first has a local IP of 10.0.0.1, public IP 64.x.x.x. The second has a local IP of 10.0.0.10, public IP 70.x.x.x. There is an FTP server on our LAN with a…
James
  • 15
  • 2
0
votes
1 answer

Watchguard blocking ports

I want to block the whole Internet for particular hosts. In this case I used policy 'Any" which basically blocks every single port (tcp+udp I believe). In FROM field I put particular IP address from host, and in TO I put any. I uploaded the config…
Kai
  • 33
  • 1
  • 10
0
votes
0 answers

Watchguard M400 Tagging VLAN

I have a problem with WatchGuard Firebox M400. I put interface 2 into VLAN mode. I created earlier few VLANs like: 10, 20, 30, 40, 110 and 199. When im puting those VLANs in that interface, i checked them all as TAGGED, then when I'm connecting a…
Kai
  • 33
  • 1
  • 10
0
votes
4 answers

What are the instructions to reset a Watchguard Firebox X1000?

We had a Firebox X1000 model R6264S, and the power supply died. We purchased another one cheaply from Ebay, but I cannot find instructions anywhere about how to reset this device to factory defaults so I can reconfigure it. If anyone here has…
Jonathan Hickman
  • 33
  • 1
  • 1
  • 3
0
votes
1 answer

Watchguard Firebox SSL certificate validation failed

I'm really stuck on this one! I have two Watchguard firebox firewalls. My SSL certificates expired and I bought two new wildcard certificates from RapidSSL. I couldn't get the certificate to install on the first one. "certificate validation…
Kristofer Källsbo
  • 153
  • 2
  • 7
0
votes
1 answer

Making internal website available publicly (Win 2008 Server)

I have an IIS 7 web site that is running on a Windows 2008 Server (64-bit) VMWare on a Windows 2008 Server (64-bit) Host on my local network. My router is a Firebox XEdge and it has port 80 directed to the IP of the server on VMWare. I can reach…
endigo
  • 1
1
2