4

I'm trying to modify the LDAP admin password on a fresh OpenLDAP install on CentOS 6.7 (similar to RHEL 6.7).

I created a file called change_ldap_password.ldif:

# Hash your password:
# slappasswd -h {SSHA} -s "my_password"

# I also tried {1}hdb instead of {0}config
dn: olcDatabase={0}config,cn=config
changetype: modify
add: olcRootPW
olcRootPW: {SSHA}YP8q2haCD1POSzQC3GAuBdrfaHh+/Y49

When I run the following command as root, I get an access error:

# ldapmodify -x  -W -D "cn=admin,dc=my_domain,dc=com" -f ./change_ldap_password.ldif
Enter LDAP Password:
modifying entry "olcDatabase={0}config,cn=config"
ldap_modify: Insufficient access (50)

Here's the output of ldapwhoami:

# ldapwhoami -x  -W -D "cn=admin,dc=my_domain,dc=com"
Enter LDAP Password:
dn:cn=admin,dc=my_domain,dc=com

Here's the result of grepping for olcRoot in cn=config:

# grep -R olcRoot /etc/openldap/slapd.d/cn=config
/etc/openldap/slapd.d/cn=config/olcDatabase={1}hdb.ldif:olcRootDN: cn=admin,dc=my_domain,dc=com
/etc/openldap/slapd.d/cn=config/olcDatabase={1}hdb.ldif:olcRootPW:: ...

Here's the debug info for ldapmodify:

# ldapmodify -x  -W -D "cn=admin,dc=my_domain,dc=com" -f ./change_ldap_password.ldif -d1
ldap_create
Enter LDAP Password:
ldap_sasl_bind
ldap_send_initial_request
ldap_new_connection 1 1 0
ldap_int_open_connection
ldap_connect_to_host: TCP localhost:389
ldap_new_socket: 4
ldap_prepare_socket: 4
ldap_connect_to_host: Trying 127.0.0.1:389
ldap_pvt_connect: fd: 4 tm: -1 async: 0
attempting to connect:
connect errno: 111
ldap_close_socket: 4
ldap_int_open_connection
ldap_connect_to_path
ldap_new_socket: 4
ldap_connect_to_path: Trying /var/run/ldapi
ldap_connect_timeout: fd: 4 tm: -1 async: 0
ldap_ndelay_on: 4
ldap_close_socket: 4
ldap_int_open_connection
ldap_connect_to_host: TCP localhost:636
ldap_new_socket: 4
ldap_prepare_socket: 4
ldap_connect_to_host: Trying 127.0.0.1:636
ldap_pvt_connect: fd: 4 tm: -1 async: 0
attempting to connect:
connect success
TLS: certdb config: configDir='/etc/openldap/certs' tokenDescription='ldap(0)' certPrefix='' keyPrefix='' flags=readOnly
TLS: using moznss security dir /etc/openldap/certs prefix .
TLS: certificate [CN=my_server.my_domain.com] is valid
TLS certificate verification: subject: CN=my_server.my_domain.com, issuer: CN=my_server.my_domain.com, cipher: AES-256, security level: high, secret key bits: 256, total key bits: 256, cache hits: 0, cache misses: 0, cache not reusable: 0
ldap_open_defconn: successful
ldap_send_server_request
ber_scanf fmt ({it) ber:
ber_scanf fmt ({i) ber:
ber_flush2: 50 bytes to sd 4
ldap_result ld 0x184a340 msgid 1
wait4msg ld 0x184a340 msgid 1 (infinite timeout)
wait4msg continue ld 0x184a340 msgid 1 all 1
** ld 0x184a340 Connections:
* host: (null)  port: 636  (default)
  refcnt: 2  status: Connected
  last used: Fri Oct 30 14:04:24 2015


** ld 0x184a340 Outstanding Requests:
 * msgid 1,  origid 1, status InProgress
   outstanding referrals 0, parent count 0
  ld 0x184a340 request count 1 (abandoned 0)
** ld 0x184a340 Response Queue:
   Empty
  ld 0x184a340 response count 0
ldap_chkResponseList ld 0x184a340 msgid 1 all 1
ldap_chkResponseList returns ld 0x184a340 NULL
ldap_int_select
read1msg: ld 0x184a340 msgid 1 all 1
ber_get_next
ber_get_next: tag 0x30 len 12 contents:
read1msg: ld 0x184a340 msgid 1 message type bind
ber_scanf fmt ({eAA) ber:
read1msg: ld 0x184a340 0 new referrals
read1msg:  mark request completed, ld 0x184a340 msgid 1
request done: ld 0x184a340 msgid 1
res_errno: 0, res_error: <>, res_matched: <>
ldap_free_request (origid 1, msgid 1)
ldap_parse_result
ber_scanf fmt ({iAA) ber:
ber_scanf fmt (}) ber:
ldap_msgfree
modifying entry "olcDatabase={0}config,cn=config"
ldap_modify_ext
ldap_send_initial_request
ldap_send_server_request
ber_scanf fmt ({it) ber:
ber_scanf fmt ({) ber:
ber_flush2: 102 bytes to sd 4
ldap_result ld 0x184a340 msgid 2
wait4msg ld 0x184a340 msgid 2 (timeout 100000 usec)
wait4msg continue ld 0x184a340 msgid 2 all 1
** ld 0x184a340 Connections:
* host: (null)  port: 636  (default)
  refcnt: 2  status: Connected
  last used: Fri Oct 30 14:04:24 2015


** ld 0x184a340 Outstanding Requests:
 * msgid 2,  origid 2, status InProgress
   outstanding referrals 0, parent count 0
  ld 0x184a340 request count 1 (abandoned 0)
** ld 0x184a340 Response Queue:
   Empty
  ld 0x184a340 response count 0
ldap_chkResponseList ld 0x184a340 msgid 2 all 1
ldap_chkResponseList returns ld 0x184a340 NULL
ldap_int_select
read1msg: ld 0x184a340 msgid 2 all 1
ber_get_next
ber_get_next: tag 0x30 len 12 contents:
read1msg: ld 0x184a340 msgid 2 message type modify
ber_scanf fmt ({eAA) ber:
read1msg: ld 0x184a340 0 new referrals
read1msg:  mark request completed, ld 0x184a340 msgid 2
request done: ld 0x184a340 msgid 2
res_errno: 50, res_error: <>, res_matched: <>
ldap_free_request (origid 2, msgid 2)
ldap_parse_result
ber_scanf fmt ({iAA) ber:
ber_scanf fmt (}) ber:
ldap_msgfree
ldap_err2string
ldap_modify: Insufficient access (50)

ldap_free_connection 1 1
ldap_send_unbind
ber_flush2: 7 bytes to sd 4
ldap_free_connection: actually freed

If I enter a wrong password, the error changes from Insufficient Access to Invalid Credentials:

ldap_bind: Invalid credentials (49)

I saw this ServerFault question, but that one was about a user with limited privileges rather than admin or root.

How do I get past the ldap_modify: Insufficient access (50) error?

Why does root identifying as LDAP admin not have access to change the password?

I'm ok reinstalling slapd if that's the recommended solution. I'd like to resolve this error before moving further.

Edit: Going to cn=config on ldapi:/// gives the following error:

# ldapsearch -H ldapi:/// -Y EXTERNAL -b 'cn=config' -d1
ldap_url_parse_ext(ldapi:///)
ldap_create
ldap_url_parse_ext(ldapi:///??base)
ldap_sasl_interactive_bind: user selected: EXTERNAL
ldap_int_sasl_bind: EXTERNAL
ldap_new_connection 1 1 0
ldap_int_open_connection
ldap_connect_to_path
ldap_new_socket: 3
ldap_connect_to_path: Trying /var/run/ldapi
ldap_connect_timeout: fd: 3 tm: -1 async: 0
ldap_ndelay_on: 3
ldap_close_socket: 3
ldap_msgfree
ldap_err2string
ldap_sasl_interactive_bind_s: Can't contact LDAP server (-1)

I think I have ldapi:// defined in /etc/openldap/ldap.conf, but I'm not sure about ldapi:///

#
# LDAP Defaults
#

# See ldap.conf(5) for details
# This file should be world readable but not world writable.

BASE    dc=my_domain,dc=com
#URI    ldap://ldap.example.com ldap://ldap-master.example.com:666
URI     ldap:// ldapi:// ldaps://

#SIZELIMIT  12
#TIMELIMIT  15
#DEREF          never

TLS_CACERTDIR /etc/openldap/certs

Edit 2: I get the same ldap_sasl_interactive_bind_s: Can't contact LDAP server (-1) error after stopping the firewall (service iptables stop), so the firewall is not the issue.

Community
  • 1
Leo
  • 973
  • 6
  • 21
  • 38

1 Answers1

7

In order to admin the 'cn=config' database you need the 'cn=config' admin, not the admin of the data DB. In debian such admin is root with SASL TLS External. Try 

sudo ldapsearch -H ldapi:/// -Y EXTERNAL -b 'cn=config'

Once you've confirmed the above works, you can change the password. First, hash the value:

slappasswd -h {SSHA} -s "my_password"

Then, paste the hashed value into an ldif file such as ./change_ldap_password.ldif:

dn: olcDatabase={0}config,cn=config
changetype: modify
add: olcRootPW
olcRootPW: {SSHA}cZbRoOhRew8MBiWGSEOiFX0XqbAQwXUr

Finally, apply the ldif file:

sudo ldapmodify -H ldapi:/// -Y EXTERNAL -D 'cn=config' -f ./change_ldap_password.ldif

Changing passwords with ldapmodify is discouraged. If user exists (it is not this case), ldappasswd is way better.

473183469
  • 1,350
  • 1
  • 12
  • 23
  • `ldapsearch -d1 -b "cn=config" -Y EXTERNAL` gives `ldap_sasl_interactive_bind_s: Unknown authentication method (-6) additional info: SASL(-4): no mechanism available:` – Leo Nov 02 '15 at 16:22
  • `ldapsearch -d1 -b "cn=config" -W` gives `ldap_sasl_interactive_bind_s: Local error (-2) additional info: SASL(-1): generic failure: GSSAPI Error: Unspecified GSS failure. Minor code may provide more information (Credentials cache file '/tmp/krb5cc_0' not found)` – Leo Nov 02 '15 at 16:23
  • `ldapsearch -d1 -b "cn=config" -x` gives `result: 32 No such object` – Leo Nov 02 '15 at 16:23
  • The "-H ldapi:///" is paramount. SASL/TLS EXTERNAL works because it gets sure you are root. But it can be sure of this only if you connect throught the ldapi socket (not the network, not even ldap://localhost). Can you please type verbatim what I suggested? – 473183469 Nov 02 '15 at 16:47
  • Verbatim, I get `ldap_sasl_interactive_bind_s: Can't contact LDAP server (-1)`. I've added the full details to the question. – Leo Nov 02 '15 at 19:12
  • Minor correction: That's external peercred. External TLS uses certificates and will work over tcp connections. – 84104 Nov 02 '15 at 22:43
  • @Leons: first of all I would start a new question as it is unrelated to access to 'cn=config'. Next: I would check presence of unix socket file `/var/run/ldapi` (from your logs) with correct ownership. Then, is your slapd started with `-h [ldap or ldaps or both] ldapi:///' (i.e. is `ldapi:///` present)? Checking logs on slapd starting, does it report to communicate on the same unix socket client lib searches for? Maybe a new question is not a bad idea! – 473183469 Nov 03 '15 at 07:32
  • @473183469: Follow-up question with diagnostics: http://serverfault.com/questions/733637/ldap-sasl-interactive-bind-s-cant-contact-ldap-server-1-for-ldapi-on-ce – Leo Nov 03 '15 at 17:26
  • Thanks everyone! After fixing my `/etc/sysconfig/ldap` configuration to enable `ldapi:///` per http://serverfault.com/questions/733637/ldap-sasl-interactive-bind-s-cant-contact-ldap-server-1-for-ldapi-on-ce , I was able to run `ldapmodify -H ldapi:/// -Y EXTERNAL -D 'cn=config' -f ./change_ldap_password.ldif` and change the admin password. – Leo Nov 03 '15 at 20:44