libinput

The X.Org input driver supports most regular input devices. Particularly notable is the project's goal to provide advanced support for touch (multitouch and gesture) features of touchpads and touchscreens. See the libinput documentation for more information.

Related articles

From the libinput wiki page:

libinput is a library to handle input devices in Wayland compositors and to provide a generic X.Org input driver. It provides device detection, device handling, input device event processing and abstraction to minimize the amount of custom input code compositors need to provide the common set of functionality that users expect.

Installation

If you installed either Xorg or Wayland, then Libinput should already be installed as a dependency; there are no necessary extra packages.

  • For Wayland, the libinput package should be installed as a dependency of any graphical environment you use that has Wayland, and no additional driver is needed.
  • For Xorg, xf86-input-libinput is also a dependency. It is "a thin wrapper around libinput and allows for libinput to be used for input devices in X. This driver can be used as as drop-in replacement for evdev and synaptics." . It replaces other packages used for input with X (i.e., those prefixed with xf86-input-).

You may want to install xorg-xinput to be able to change settings at runtime.

Configuration

For Wayland, there is no libinput configuration file. The configurable options depend on the progress of your desktop environment's support for them; see #Graphical tools. To configure options that your desktop environment does not yet support (e.g. touchpad scroll speed on GNOME), libinput-config-gitAUR may be used as a work-around. Available options for that tool are documented in the libinput-config README.

For Xorg, a default configuration file for the wrapper is installed to . No extra configuration is necessary for it to autodetect keyboards, touchpads, trackpointers and supported touchscreens.

Via xinput

First, execute:

# libinput list-devices

It will output the devices on the system and their respective features supported by libinput.

After a restart of the graphical environment, the devices should be managed by libinput with default configuration, if no other drivers are configured to take precedence.

See for general options to set and information about allowable values. The xinput tool is used to view or change options available for a particular device at runtime. For example:

$ xinput list

to view all devices and determine their names and numbers. In the following, is either the name or number identifying the device to operate with.

$ xinput list-props device

to view and 

$ xinput set-prop device option setting

to change a setting. can be either the number or the name of the option. For example, to set both options of libinput Click Method Enabled (303), either of the following can be issued:

$ xinput set-prop 14 303 1 1

or 

$ xinput set-prop 14 "libinput Click Method Enabled" 1 1

Via Xorg configuration file

See Xorg#Using .conf files for permanent option settings. Logitech Marble Mouse#libinput and #Tapping button re-mapping illustrate examples.

Alternative drivers for Xorg#Input devices can generally be installed in parallel. If you intend to switch driver for a device to use libinput, ensure no legacy configuration files /etc/X11/xorg.conf.d/ for other drivers take precedence.

Tip:
  • If you have libinput and synaptics installed in parallel with default configuration (i.e. no files in /etc/X11/xorg.conf.d for either), synaptics will take precedence due to its higher numeric order 70- in the default installation directory. To avoid this, you can symlink the default libinput configuration (40-libinput.conf) to /etc/X11/xorg.conf.d/ where directory search order precedence over 70-synaptics.conf will take place instead:
# ln -s /usr/share/X11/xorg.conf.d/40-libinput.conf /etc/X11/xorg.conf.d/40-libinput.conf

If you do have /etc/X11/xorg.conf.d/ configuration files for both, the libinput file must be ordered second; see Xorg#Using .conf files. If you want to disable libinput (and fallback to older drivers) - just remove the previously created symbolic link from /etc/X11/xorg.conf.d/.

  • If a configuration file seems to have no effect at all, check that it is readable by unprivileged users.

One way to check which devices are managed by libinput is the xorg logfile. For example, the following:

is a notebook without any configuration files in /etc/X11/xorg.conf.d/, i.e. devices are auto-detected.

Of course you can elect to use an alternative driver for one device and libinput for others. A number of factors may influence which driver to use. For example, in comparison to Touchpad Synaptics the libinput driver has fewer options to customize touchpad behaviour to one's own taste, but far more programmatic logic to process multitouch events (e.g. palm detection as well). Hence, it makes sense to try the alternative, if you are experiencing problems on your hardware with one driver or the other.

Custom configuration files should be placed in /etc/X11/xorg.conf.d/ and following a widely used naming schema is often chosen as filename.

A basic configuration should have the following structure:

You may define as many sections as you like in a single configuration file (usually one per input device). To configure the device of your choice specify a filter by using one of the available filters from , e.g.

  • (trackpoint)
  • MatchIsTouchpad "on"

The input device can then be configured with any of the lines of libinput(4) § CONFIGURATION_DETAILS. Common options include:

  • : tapping a.k.a. tap-to-click
  • : trackpad no longer has middle and right button areas and instead two-finger click is a context click and three-finger click is a middle click, see the docs.
  • : natural (reverse) scrolling
  • : edge (vertical) scrolling

Bear in mind that some of them may only apply to certain devices and you will need to restart X for changes to take effect.

Graphical tools

There are different GUI tools:

  • GNOME:
  • Cinnamon:
    • Similar to the GNOME UI, with more options.
  • MATE:
    • Mouse option available in the settings panel. Also accessible using
  • KDE Plasma 5:
    • Keyboard, mouse and controller devices can be configured from System Settings.
  • Xfce:
    • Configured from the Mouse and Touchpad submenu in .

Tips and tricks

Tapping button re-mapping

Swapping two- and three-finger tap for a touchpad is a straight forward example. Instead of the default three-finger tap for pasting, you can configure two-finger tap pasting by setting the option in your Xorg configuration file. To set 1/2/3-finger taps to left/right/middle, set to , for left/middle/right set it to lmr.

Remember to remove MatchIsTouchpad "on" if your device is not a touchpad and adjust the Identifier accordingly.

Manual button re-mapping

For some devices, it is desirable to change the button mapping. A common example is the use of a thumb button instead of the middle button (used in X11 for pasting) on mice where the middle button is part of the mouse wheel. You can query the current button mapping via:

$ xinput get-button-map device

where device is either the device name or the device ID, as returned by . You can freely permutate the button numbers and write them back. Example:

$ xinput set-button-map device 1 6 3 4 5 0 7

In this example, we mapped button 6 to be the middle button and disabled the original middle button by assigning it to button 0. For more information, please read about "ButtonMapping" section in . This may also be used for Wayland, but be aware both the device number and its button-map will be different. Hence, settings are not directly interchangeable.

Some devices occur several times under the same device name, with a different amount of buttons exposed. The following is an example for reliably changing the button mapping for a Logitech Revolution MX mouse via xinitrc:

You could also use the Xorg configure file to do that. The trackball used in this example has a physical scroll wheel, for those devices without that may need to refer the configure for Logitech Marble Mouse. The physical buttons in Kensington Slimblade Trackball layout are: So for the left hand user, you may use the configure below, although you do not have neither a scroll up button nor scroll down button, you cannot disable them in configure or some application will not response to the action of the wheel.

Change touchpad sensitivity

The method of finding the correct thresholds for when libinput registers a touch as DOWN and back UP again can be found in the upstream documentation.

Custom touchpad pressure values can be set via temporary local device quirks. See .

Note: Quirks are an internal API and are not guaranteed to work in future libinput versions. Between versions 1.11 and 1.12, udev rules were replaced by .quirk files .

Disable touchpad

To disable the touchpad, first get its name with and then disable it with .

To make it permanent, see Autostarting.

To toggle, write a script such as .

Gestures

While the libinput driver already contains logic to process advanced multitouch events like swipe and pinch gestures, the Desktop environment or Window manager might not have implemented actions for all of them yet.

libinput-gestures

For EWMH (see also wm-spec) compliant window managers, the libinput-gestures utility can be used meanwhile. The program reads libinput gestures (through ) from the touchpad and maps them to gestures according to a configuration file. Hence, it offers some flexibility within the boundaries of libinput's built-in recognition.

To use it, install the package. You can use the default system-wide configured swipe and pinch gestures or define your own in a personal configuration file, see the README for details.

If using touchegg, uninstall the package to prevent conflicts (see ).

fusuma

Fusuma is a multitouch gesture recognizer, written in Ruby, which can be used as an alternative to libinput-gestures.

Install the fusuma Ruby gem:

$ gem install fusuma

Alternatively, there is also .

Other than the fusuma Ruby gem gem you have to install the Ruby gem or one between the (for X) and (for Wayland). Other alternatives are listed here.

Then in ~/.config/fusuma/config.yml you have to set something like:

Or for :

Same thing for .

The swipe threshold is important for not swiping back too many pages.

Notice that the configure is for three fingers swipe. Two fingers swipe is not supported .

Gebaar

Gebaar is another gesture recognizer. Unlike Fusuma, it does not support pinching (support is planned in the future though) and thresholds, but in addition to swiping left, right, up and down with 3/4 fingers, it also supports diagonal swipes, which Fusuma does not.

There is a fork of gebaar at Gebaar which could be installed through gebaar-libinput-gitAUR which supports pinch gestures and adds additional features to original gebaar. Take in mind that this version is currently under active development and introduces configuration changes which makes it incompatable to original Gebaar

GnomeExtendedGestures

For deeper integration with GNOME, there is GnomeExtendedGestures (). Three finger horizontal and vertical gestures can be configured to perform gnome-shell actions (such as toggling the application overview or cycling between them).

Scroll with mouse by holding a button

There is a nice trick to optimize scrolling with a mouse or trackball by holding a mouse button (like right or middle button, or some other if the mouse has more buttons) and moving the mouse. Very useful in case your mouse does not have the mouse wheel (often the case with the trackballs). To do that one has to set to and specify the mouse button in the option for the action. Here is an example for configuration to achieve that:

/etc/X11/xorg.conf.d/00-mouse.conf
Section "InputClass"
    Identifier "system-mouse"
    MatchIsPointer "on"
    Option "ScrollMethod" "button"
    Option "ScrollButton" "3"
EndSection

Mouse wheel scrolling speed scaling

For some mouses, especially when using on a HiDPI desktop, the wheel scrolls too slow. A patch is submitted to libinput but it has not been accepted. There is a third-party xf86-input-libinput that incoperates this patch.

This patch introduces a new property to mouses, and you can set a scaling factor like

$ xinput --set-prop 'RAPOO Rapoo 2.4G Wireless Device' 'libinput Scroll Distance Scale' 2.5 2.5

where the is the name of your mouse device, listed in . are the scaling factors, for x- and y-axis, respectively.

Alternatively, install and restart Xorg, then enlarge y-axis scroll distance to 6 times by

$ echo 6 > /tmp/libinput_discrete_deltay_multiplier

Here is an example to modify the scaling factor upon focusing change

Troubleshooting

First, see whether executing can support you in debugging the problem, see for options.

Some inputs require kernel support. The tool evemu-describe from the package can be used to check:

Compare the output of software supported input trackpad driver with a supported trackpad. i.e. a couple of ABS_ axes, a couple of ABS_MT axes and no REL_X/Y axis. For a clickpad the INPUT_PROP_BUTTONPAD property should also be set, if it is supported.

Touchpad not working in GNOME

Ensure the touchpad events are being sent to the GNOME desktop by running the following command:

$ gsettings set org.gnome.desktop.peripherals.touchpad send-events enabled

Additionally, GNOME may override certain behaviors, like turning off Tapping and forcing Natural Scrolling. In this case the settings must be adapted using GNOMEs command line tool or a graphical frontend of your choice. For example if you wish to enable Tapping and disable Natural Scrolling for your user, adjust the touchpad key-values like the following:

$ gsettings set org.gnome.desktop.peripherals.touchpad tap-to-click true
$ gsettings set org.gnome.desktop.peripherals.touchpad natural-scroll false

Inertial scrolling does not work in KDE

The feature is currently not implemented, see KDE bug 456383. As a workaround for Chromium-based browsers, install the SmoothScroll extension.

gollark: Bee.
gollark: ddg! Rfc 649
gollark: You experienced it in that it had some effects on you and other things. Some of the mental effects are now reverted. Others probably weren't and any physical effects also weren't.
gollark: This being difficult is mostly just due to "experienced" and "you" being poorly defined.
gollark: Newton's flaming laser sword applies, then.

See also
This article is issued from Archlinux. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.