Lynx (Rheinmetall armoured fighting vehicle)

Lynx is an armoured fighting vehicle developed by Rheinmetall Landsysteme (part of Rheinmetall's Vehicle Systems division). The Lynx, configured as a KF31 infantry fighting vehicle (IFV), was unveiled publicly at the Eurosatory defence exhibition on June 14, 2016.[1] The KF41 variant was unveiled publicly at the Eurosatory defence exhibition on June 12, 2018.[2][3] According to Rheinmetall, the Lynx family of tracked armoured vehicles is at the forefront of a new trend in IFV design toward armoured vehicles with lower unit and through-life costs and reduced complexity. One of the key principles of the Lynx concept is the integration of proven sub-systems with a high technology readiness level to reduce development time, cost and technical risk.[4]

Lynx
Lynx KF41
Place of originGermany
Production history
DesignerRheinmetall Landsysteme GmbH
Designed2015
ManufacturerRheinmetall Landsysteme GmbH
Variantsfamily (outline details for IFV available)
Specifications
Mass34 to 50 tonnes
Length7.22 to 7.73 m (23 ft 8 in to 25 ft 4 in)
Width3.6 m
Height3.3 m (turret top on IFV)
Crew3 + 6/8

Armoursteel armour with various applique
Main
armament
Lance turret (KF31) wth 30 mm Rheinmetall MK30-2/ABM or 35 mm Wotan 35 or Lance 2.0 turret (KF41) with 35 mm Rheinmetall Wotan 35 autocannon
Secondary
armament
co-axial 7.62 mm light machine gun, smoke grenade launchers and optional Spike LR2 ATGMs or UAV launchers
EngineLiebherr diesel engine (options available)
750hp (563kW)/1,140hp (850kW)
Payload capacityconfiguration and protection level dependent
TransmissionAllison X300 Series (KF31) or Renk HSWL 256 (KF41) fully automatic
Suspensionswing arms with torsion bars and shock-absorbers
Fuel capacity>700 litres (located in the rear sponsons with an additional large reserve fuel tank in the engine bay)
Operational
range
500 km (operational)
Maximum speed 65–70 km/h

Development

The Lynx family has been designed as a highly protected tracked armoured vehicle to fill a gap identified in the market by Rheinmetall.[5] It was first shown publicly in June 2016, and in the lighter KF31 configuration.

On June 4, 2018 Rheinmetall issued a press release informing that the larger Lynx KF41 would debut twice in different configurations at the upcoming Eurosatory defence exhibition later that month. Following the unveiling in IFV configuration on 12 June the vehicle was reconfigured as a command variant, which was unveiled on 13 June. The First configuration would be as an infantry fighting vehicle with the new LANCE 2.0 turret, and then after refitting on site, configured as command variant.[6][3]

As of May 2020 Rheinmetall have proposed the Lynx in Australia, Czech Republic, the United States and, according to Spring 2020 investor call transcripts, they are reportedly in the final phase of negotiations with Hungary regarding an order over €2B ($2.3B in May 2020) worth of infantry fighting vehicles, rumored to be about 210-220 Lynx units.

On August 17, 2020 the Magyar Távirati Iroda announced that the previous day the Government of Hungary and Rheinmetall Group have signed a contract to establish a joint venture to start manufacturing the Lynx KF41 infantry fighting vehicle in Hungary. The deal is estimated to worth over 2B euros including technology transfers and it confirms the Hungarian Defence Forces has chosen the Lynx KF41 as the next-gen tracked IFV for its armed forces.

Design

The Lynx is built around a sponson-shaped hull with a long, shallow glacis and angled belly plate. The driver compartment is at the front left, the engine the front right, fighting compartment in the middle (when fitted with a turret) and there is a dismount compartment at the rear, access to which is via a ramp in the rear of the vehicle.

A key feature of the Lynx design concept is the separation and modularity of the vehicle into two primary parts: the basic vehicle and specialist mission and role equipment. Lynx variants are designed around a common drive module with scalable armour and armament options upon which the mission kits are installed. Available kits currently include an IFV as well as an APC. For the former, a turret is fitted to the roof of the hull, for the latter the turret is removed and replaced by a roof plate that includes an array of vision devices and an ROWS. It is understood that this transformation can be carried out near to, or in the field, within eight hours. Future variants will include command, engineer reconnaissance, and joint fires vehicles all armed with the standard turret, as well as non-turreted versions including repair, recovery, combat engineer, and ambulance.[7]

According to Rheinmetall, this design approach combines the functional, cost and through life advantages of a modular structure, and the weight, space and cost advantages of an integral hull design.[8]

Mobility

The power pack located at the front right consists of a Liebherr diesel coupled to either an Allison X300 series 6F/1R or Renk HSWL 256 automatic transmission. The Liebherr diesel is of the common rail type and fitted with a two-stage turbocharger and two stage intercooler. Power output varies from 755 hp (KF31) to 1,140 hp (KF41).[8] The exhaust (right) and engine cooling (left) are routed to the rear of the vehicle to reduce its thermal and acoustic signature.[9] Final drives are mounted in the front and the idler sprockets with track tensioners are mounted at the rear. The running gear has six road wheel stations per side, which guide a lightweight steel or segmented rubber band-type track. The rubber-tyred road wheels are mounted on a suspension system comprising swing arms with conventional torsion bars and a SupaShock damper systems, this set-up is proven to be reliable and cost-efficient.[9]

The Lynx is fitted with as many mature sub-systems as possible in order to facilitate maintenance. The KF41 transmission is the same as that used in the Puma and Ajax vehicles, the Liebherr engine is used in the construction industry, and the driver’s station is taken from the Kodiak armoured engineering vehicle. The NBC system is the same as that installed on Boxer and the tracks are identical to those used on the PzH 2000.[9]

Mobility parameters include a gradeability of at least 60%, a sideslope traverse capability of at least 30%, the ability to climb (forwards) a 1 m vertical obstacle, the ability to cross a 2.5 m trench, and an unprepared fording depth of 1.5 m. Operational range is 500 km. [9]

The driver is located to the left front side of the hull and is furnished with three periscopes, one of which can be replaced with a night vision alternative. The rear crew compartment is designed as a mission neutral space with the incorporation of C-rails and a pattern of universal fixing points on the walls and floor. This provides a flexible configuration for all mission specific equipment. A large power-operated rear ramp allows for rapid ingress/egress of dismounts.[7][9]


Protection

The vehicle's ballistic steel armour is designed to protect the Lynx from anti-tank weapons, medium-caliber ammunition, artillery shrapnel and bomblets. The interior is fitted with a spall liner to protect the crew, while the vehicle also features decoupled seats in addition to mine and IED protection packages that include a double floor.[10][11][9]

The heating, cooling and nuclear, biological and chemical filtration system is combined in an environmental control system stowed in the rear-located left sponson in front of the cooling system. Air ducts lead to the floor and to an air duct interface on the top end of the hull.[7]

Additional active protection can be provided for shaped charge warhead attack using Rheinmetall's Active Protection System AMAP-ADS. A range of passive protection and defensive aids are also available. They include a rapid obscuration system (ROSY), laser warning system and acoustic shot locator system. These are integrated in the Lance turret when it is fitted along with automatic target recognition and automatic target tracking.[7]

Armament

The vehicle as shown at Eurosatory 2016 is outfitted with a LANCE turret[12] mounting a stabilized, externally powered, autocannon of 30 mm or 35 mm caliber, with airburst munition support. This allows the Lynx to engage targets at ranges of up to 3,000 meters, both when static and when on the move. The vehicle's main armament has an elevation of between +45˚ and −10˚ and has a controlled rate of fire of 200 rounds per minute. Mounted coaxial to the right is the latest Rheinmetall Machine Gun (RMG) 7.62 mm, which can fire standard 7.62 × 51 mm NATO ammunition and has a maximum rate of fire of 800 rounds a minute. The turret has manual back-up in case of power failure.[10][9]

The vehicle can also mount an optional anti-tank guided missile launcher.[11] The demonstrator vehicle at Eurosatory 2016 was outfitted with a twin-round launcher for the Spike-LR anti-tank guided missile.[7]

The IFV variant of the KF41 variant shown at Eurosatory 2018 was fitted with the updated LANCE 2.0 turret, this having flexible mission pods fitted on the left and right sides so that a variety of subsystems can be installed to provide the turret with specialist capabilities.[3]

Variants

The Lynx family of tracked armoured vehicles is based around two primary models, the KF31 and a slightly larger but considerably heavier KF41. Both models can be configured for a variety of roles that include command and control, armoured reconnaissance, surveillance, repair, recovery or ambulance operations in addition to infantry fighting vehicle configuration.[13][14]

Kettenfahrzeug 31 (KF31)

This model, first displayed at Eurosatory 2016, has a maximum permissible gross vehicle weight of 35 to 38 tonnes, is 7.22 meters long[7] and can carry a crew of three plus six passengers.[10][11] Powered by a 563 kW (755 hp) engine, the vehicle can reach a top speed of 65 km/h.[7]

Kettenfahrzeug 41 (KF41)

This model, as displayed for the first time at Eurosatory 2018, has a maximum permissible gross vehicle weight of up to 50 tonnes.[7] The KF41 can carry a crew of three plus eight passengers.[1][10][11] It is powered by an 850 kW (1,140 hp) engine[11] and has a top speed of 70 km/h (43 mph).[7] The KF41 is being offered to the Australian Army for the LAND 400 program.[4][3]

Operators

Future operators

 Hungary
On August 16, 2020 the Government of Hungary and Rheinmetall Group have signed a contract to start manufacturing the Lynx infantry fighting vehicle family in Hungary. Estimated to start arriving around 2024-2025, the first batch of 200+ Lynx vehicles are expected to reach operational capability in the Hungarian Defence Forces by 2026-2027. [15]

Potential operators

 Australia
Rheinmetall has submitted the Lynx KF41 for the Australian Defence Force's LAND 400 Phase 3 program, the Request for Tender (RfT) for which was released on 24 August 2018. Land 400 Phase 3 will replace the Australian Army's M113AS4 armoured personnel carriers (APCs) with up to 450 modern infantry fighting vehicles (IFVs) and 17 manoeuvre support vehicles.[4][16] In mid-September 2019, Rheinmetall's Lynx KF41 Infantry Fighting Vehicle (IFV) and Hanwha's Redback K21 IFV were shortlisted for consideration for the Australian Army’s project Land 400 Phase 3 and will provide prototypes for a risk mitigation activity.[17][8] Down-selection of a preferred tenderer that will be presented to the government for consideration is expected during 2022 and following that an initial operating capability of the selected platform is expected to be reached in 2024–2025, while final operating capability is expected by 2030–2031. Rheinmetall has also responded to a request for information on the procurement of another 117 vehicles under the Land 400 programme, these configured as logistics, mortar carries with direct fire capabilities, mortar ammo providers, and protected amphibious platforms.[8]
 Czech Republic
Rheinmetall submitted the Lynx KF41 for the Army of the Czech Republic's (ACR's) program to replace its current BVP-2, a Czech produced version of BMP-2. In November 2017 the Czech MoD completed field tests of four tracked AFV finalists and planned to select a winning platform by mid-2018, awarding a CZK50 billion contract for a mixed batch of 210 platforms with initial deliveries to begin in 2020. The ACR were reportedly very satisfied with the Lynx.[18] In December 2018, Lynx was shortlisted together with the Puma, ASCOD and CV90.[19] In October 2019 it was announced that the Puma was being withdrawn from the competition. The manufacturer said that the Czech Army requirements would require an expensive redesign to the existing Puma which it was unwilling to undertake.[20] As of February 2020 no decision had been announced.
 Qatar
In December 2018, a single Lynx KF41 was presented in the annual National Day parade badged and camouflaged as a Qatar Military Police (MP) vehicle. Rheinmetall declined to comment as to the nature of the vehicle’s presence at the parade.[8]
 United States
In October 2018, Rheinmetall announced a teaming with Raytheon to propose the Lynx KF41 to the U.S. Army in answer to its developing Next-Generation Combat Vehicle program, this slated to replace the Bradley Fighting Vehicles and other current platforms.[21] This program, now known as the Optionally Manned Fighting Vehicle program, was halted on 16 January 2020. The U.S. stated it was cancelling the OMFV prototyping competition in order to revisit the requirements and acquisition timeline.[8]

See also

References

  1. "Rheinmetall Defence – News archive 2015 Rheinmetall's new IFV, the Lynx". www.rheinmetall-defence.com (Press release). Retrieved 2016-06-15.
  2. "KF31 Lynx Rheinmetall IFV tracked Infantry Fighting Vehicle".
  3. "Eurosatory 2018: Rheinmetall unveils Lynx KF41 IFV | IHS Jane's". www.janes.com. Retrieved 2018-06-24.
  4. "Rheinmetall's Lynx Infantry Vehicle Targets Australian Market". Defense News. 14 June 2016. Retrieved 2016-06-15.
  5. "Lynx on the hunt [ES2016D3]". IHS Jane's 360. Retrieved 2016-06-15.
  6. "Rheinmetall at Eurosatory (2018)". www.forecastinternational.com. 2018-06-04. Retrieved 2018-06-07.
  7. "Lynx Infantry Fighting Vehicle" (PDF). Defense Technology Review Magazine. 14 June 2016. Retrieved 14 June 2016.
  8. "Lynx (Jane's AFVs 2019-2020)". IHS Jane's. Retrieved 2020-02-06.
  9. "Lynx (Jan 2018)". www.janes.com. 2017-06-09. Retrieved 2018-01-26.
  10. "Rheinmetall undiscloses the Lynx Light Armored Infantry Fighting Vehicle at Eurosatory 2016". www.armyrecognition.com. 14 June 2016. Retrieved 2016-06-15.
  11. "Rheinmetall Defence – Lynx". Rheinmetall Defence.
  12. "Lance 35".
  13. "Rheinmetall intros new Lynx infantry fighting vehicle". UPI. 14 June 2016. Retrieved 2016-06-15.
  14. "KF41 Lynx IFV Infantry Fighting Vehicle tracked armored data | Germany German army light armoured vehicle UK | Germany German army military equipment UK".
  15. "Hungary's Government and Rheinmetall to Produce Armored Fighting Vehicles in Hungary".
  16. "Australia issues tender for Land 400 Phase 3". www.janes.com. Retrieved 2018-08-30.
  17. Risk mitigation contracts were signed in October 2019, and the activity is expected to conclude around the end of 2021.Rheinmetall and Hanwha shortlisted for Land 400 Phase 3, Australian Defence Magazine, 2019-09-16
  18. "Key IFV decisions ahead for Czech MoD". www.janes.com. Retrieved 2018-01-26.
  19. "Czech Republic; Four firms shortlisted in BVP armoured vehicle tender". Defense Market Intelligence. 19 December 2018. Archived from the original on 19 December 2018. Retrieved 19 December 2018.
  20. Adamowski, Jaroslaw (18 October 2019). "Three bidders offer combat vehicles to Czech military, as German joint venture bows out". DefenseNews. Retrieved 20 October 2019.
  21. Judson, Jen (8 October 2018). "Raytheon, Rheinmetall partner to offer new Lynx fighting vehicle to US Army". Defense News. Washington. Archived from the original on 8 October 2018. Retrieved 8 October 2018.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.