Blackburn Cirrus Minor

The Blackburn Cirrus Minor is a British four-cylinder, inverted, in-line air-cooled aero-engine that was designed and built by the Cirrus Engine Section of Blackburn Aircraft Limited in the late 1930s.

Cirrus Minor
Blackburn Cirrus Minor 2A
Type Air-cooled 4-cylinder inline piston engine
National origin United Kingdom
Manufacturer Blackburn Aircraft
First run 1937

Design and development

The Cirrus Minor started life as a clean-sheet replacement for the original Cirrus and Hermes series of light aircraft engines. Design was led by Technical Director C. S. Napier, son of Montague Napier, and was already under way when in 1934 Cirrus-Hermes Engineering was taken over by the Blackburn Aeroplane & Motor Company and moved to Brough in Yorkshire.[1][2]

Napier remained Technical Director and, while he completed the development and initial sales of the Cirrus Minor and its larger stablemate the Cirrus Major, Blackburn kept Cirrus Hermes Engineering as a separate company (though without the hyphen in its name).[2]

Although completely new designs, they were of generally similar layout to the previous inverted engines, being air-cooled inverted four-cylinder inline designs. Like the others the Minor had a robust steel five-bearing crankshaft, but unlike them the long studs bolting the cylinder heads to the crank housing were replaced by short studs and flanges at each end of the cylinder barrels. Light alloy was used for the cylinder heads and con rods, while the valve gear was adopted with little change from the Hermes IV. The Claudel-Hobson down-draught carburetter featured independent altitude control, and the dual-redundant magnetos were of B.T.H. S.G.4/2 type.[1]

The Cirrus Minor was introduced in 1935. Two years later, Cirrus Hermes Engineering lost its identity as a separate company and was adopted as an operating division of its parent company, which by then had become Blackburn Aircraft.

The Minor was known for excellent reliability, and had a major "win" when it was selected to power the RAF's Taylorcraft Auster observation aircraft. The RAF's version had several modifications, known as the Series I. Although externally identical, the Series II engine was redesigned to operate on 77 octane fuel, as opposed to the original's 70, increasing power to 100 hp (75 kW).

Applications

Engines on display

Specifications (Cirrus Minor I)

Data from Lumsden [4]

General characteristics

  • Type: Inline air-cooled inverted 4-cylinder
  • Bore: 3.94 in (100 mm)
  • Stroke: 5.00 in (127 mm)
  • Displacement: 243 cu in (4 L)
  • Length: 39.9 in (1,013 mm)
  • Width: 17.9 in (455 mm)
  • Height: 25.6 in (650 mm)
  • Dry weight: 200 lb (91 kg)

Components

  • Valvetrain: 1 inlet and 1 exhaust valve per cylinder
  • Fuel system: 1 Claudel carburettor
  • Fuel type: 70 octane
  • Cooling system: Air-cooled

Performance

See also

Related development

Comparable engines

Related lists

References

Notes

  1. "A New Small Engine", Flight, 28 February 1935, pp.218-9.
  2. "The 'Cirrus Major'", Flight, 13 June 1935. Supplement.
  3. RAF Museum Cosford - Blackburn Cirrus II www.rafmuseum.org.uk Retrieved:1 January 2014
  4. Lumsden 2003, p. 90.

Bibliography

  • Oldengine.org
  • Gunston, Bill (1986). World Encyclopedia of Aero Engines. Wellingborough: Patrick Stephens. p. 40.
  • Lumsden, Alec. British Piston Engines and their Aircraft. Marlborough, Wiltshire: Airlife Publishing, 2003. ISBN 1-85310-294-6.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.