Bavarian Gts 2x3/3

The Bavarian Class Gts 2x3/3 was a former narrow gauge, German Army, military railway, steam locomotive that was in service on the narrow gauge line from Eichstätt to Kinding.

Bavarian Gts 2x3/3
DRG Class 99.20
Number(s)996
99 201
ManufacturerHenschel
Year(s) of manufacture1917
Retired1934
Wheel arrangement0-6-6-0
Axle arrangementC'C h4v
TypeK 66.9
Track gauge1,000 mm (3 ft 3 38 in)
Length over buffers11,832 mm
Service weight54.0 t
Adhesive weight54.0 t
Top speed30 km/h
Coupled wheel diameter900 mm
No. of cylinders4
LP cylinder bore620 mm
HP cylinder bore400 mm
Piston stroke450 mm
Boiler Overpressure14 bar
Grate area1.85 m2
Superheater area34.00 m2
Evaporative heating area82.71 m2
Water capacity4.5 m2
Fuel1.5 t coal

The State railway locomotive

The locomotive was built in 1917 by Henschel & Sohn in Kassel under works number 15160 for the German Army's field railways. After the end of World War I the engine was sold to the Royal Bavarian State Railways (Königlich Bayerische Staatsbahn). It was designated as Class Gts 2x3/3 and was given the number 996. It was employed on the Eichstätt–Kinding narrow gauge route. After the take over of the German state railways by the Deutsche Reichsbahn it was given the number 99 201 and classified as DRG Class 99.20.

In order not to exceed the permitted axle load, the locomotive was equipped with six axles, which were grouped into two groups of three, each with its own driving gear. This compound engine was of the Mallet locomotive type. The preheater was located in front of the chimney and lay parallel to the axis of the locomotive.

The engine could carry 1.5 tonnes of coal and 4.5 m2 of water.

After the conversion of its home line, Eichstätt–Kinding, to standard gauge in 1934 the locomotive was withdrawn from service and later scrapped.

Background information to the locomotive class

Army field railway locomotives

Locomotive 99 201 was one of a total of 20 engines, that Henschel delivered to the German Army for their field railways. Several of the machines were destroyed in the war, others were abandoned abroad, for example in France. Several engines of this series were employed on the Hedjaz railway from Damascus to Medina.

Copies

After World War I Henschel produced two further copies of this class:

  • In 1925 locomotive 104 was built for the line from Zell im Wiesental to Todtnau run by the South German Railway Company (Süddeutsche Eisenbahn-Gesellschaft). This engine was sold to the Blonay–Chamby museum railway in Switzerland in 1967.
  • In 1928 locomotive no. 12s was delivered to the Alb valley railway. In 1934 this engine then went to the Brohl valley railway. It was scrapped there in 1957.

Unlike the original German Army field railway engines, the copies were built as saturated steam locomotives.

Preserved examples

One example was in service with the Blonay–Chamby museum railway at Lake Geneva. The locomotive is currently non-operational and can be seen in the railway museum there.

Mallet locomotives 413 and 414 of the Chemin de fer du Vivarais do not belong to this class. The two engines were built in the 1930s in Alsace.

See also

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.