Vehicle emission standard
Emission standards are the legal requirements governing air pollutants released into the atmosphere. Emission standards set quantitative limits on the permissible amount of specific air pollutants that may be released from specific sources over specific timeframes. They are generally designed to achieve air quality standards and to protect human life.
Part of a series on |
Environmental law |
---|
Pollution control law |
Natural resources law |
Reference materials |
Related topics |
Regulated sources
Many emissions standards focus on regulating pollutants released by automobiles (motor cars) and other powered vehicles. Others regulate emissions from industry, power plants, small equipment such as lawn mowers and diesel generators, and other sources of air pollution.
The first automobile emissions standards were enacted in 1963 in the United States, mainly as a response to Los Angeles' smog problems. Three years later Japan enacted their first emissions rules, followed between 1970 and 1972 by Canada, Australia, and several European nations.[1] The early standards mainly concerned carbon monoxide (CO) and hydrocarbons (HC). Regulations on nitrogen oxide emissions (NOx) were introduced in the United States, Japan, and Canada in 1973 and 1974, with Sweden following in 1976 and the European Economic Community in 1977. These standards gradually grew more and more stringent but have never been unified.[2]
There are largely three main sets of standards: United States, Japanese, and European, with various markets mostly using these as their base.[2] Sweden, Switzerland, and Australia had separate emissions standards for many years but have since adopted the European standards. India, China, and other newer markets have also begun enforcing vehicle emissions standards (derived from the European requirements) in the twenty-first century, as growing vehicle fleets have given rise to severe air quality problems there, too.
Vehicle emission performance standard
An emission performance standard is a limit that sets thresholds above which a different type of vehicle emissions control technology might be needed. While emission performance standards have been used to dictate limits for conventional pollutants such as oxides of nitrogen and oxides of sulphur (NOx and SOx),[3] this regulatory technique may be used to regulate greenhouse gasses, particularly carbon dioxide (CO2). In the US, this is given in pounds of carbon dioxide per megawatt-hour (lbs. CO2/MWhr), and kilograms CO2/MWhr elsewhere.
North America
Canada
In Canada, the Canadian Environmental Protection Act, 1999 (CEPA 1999) transfers the legislative authority for regulating emissions from on-road vehicles and engines to Environment Canada from Transport Canada's Motor Vehicle Safety Act. The Regulations align emission standards with the U.S. federal standards and apply to light-duty vehicles (e.g., passenger cars), light-duty trucks (e.g., vans, pickup trucks, sport utility vehicles), heavy-duty vehicles (e.g., trucks and buses), heavy-duty engines and motorcycles.[4]
United States of America
The United States has its own set of emissions standards that all new vehicles must meet. In the United States, emissions standards are managed by the Environmental Protection Agency (EPA). Under federal law, the state of California is allowed to promulgate more stringent vehicle emissions standards (subject to EPA approval), and other states may choose to follow either the national or California standards. California had produced air quality standards prior to EPA, with severe air quality problems in the Los Angeles metropolitan area. LA is the country's second-largest city, and relies much more heavily on automobiles and has less favorable meteorological conditions than the largest and third-largest cities (New York and Chicago).
California's emissions standards are set by the California Air Resources Board, known locally by its acronym "CARB". By mid-2009, 16 other states had adopted CARB rules;[5] given the size of the California market plus these other states, many manufacturers choose to build to the CARB standard when selling in all 50 states. CARB's policies have also influenced EU emissions standards.
California is attempting to regulate greenhouse gas emissions from automobiles, but faces a court challenge from the federal government. The states are also attempting to compel the federal EPA to regulate greenhouse gas emissions, which as of 2007 it has declined to do. On May 19, 2009 news reports indicate that the Federal EPA will largely adopt California's standards on greenhouse gas emissions.
California and several other western states have passed bills requiring performance-based regulation of greenhouse gases from electricity generation.
In an effort to decrease emissions from heavy-duty diesel engines faster, the California Air Resources Board's Carl Moyer Program funds upgrades that are in advance of regulations.
The California ARB standard for light vehicle emissions is a regulation of equipment first, with verification of emissions second. The property owner of the vehicle is not permitted to modify, improve, or innovate solutions in order to pass a true emissions-only standard set for their vehicle driven on public highways. Therefore, California's attempt at regulation of emissions is a regulation of equipment, not of air quality. Vehicle owners are excluded from modifying their property in any way that has not been extensively researched and approved by CARB and still operate them on public highways.
The EPA has separate regulations for small engines, such as groundskeeping equipment. The states must also promulgate miscellaneous emissions regulations in order to comply with the National Ambient Air Quality Standards.
Europe
Before the European Union began streamlining emissions standards, there were several differing sets of rules. Members of the European Economic Community (EEC) had a unified set of rules, considerably more lax than those of the United States or Japan. These were tightened gradually, beginning on cars of over two liters displacement as the price increase would have less of an impact in this segment.[1] The ECE 15/05 norms (also known as the Luxemburg accord, strict enough to essentially require catalytic converters) began taking effect gradually: the initial step applied to cars of over 2000 cc in two stages, in October 1988 and October 1989.[2] There followed cars between 1.4 and 2.0 liters, in October 1991 and then October 1993. Cars of under 1400 cc had to meet two subsequent sets of regulations that applied in October 1992 and October 1994 respectively.[6] French and Italian car manufacturers, strongly represented in the small car category, had been lobbying heavily against these regulations throughout the 1980s.[7]
Within the EEC, Germany was a leader in regulating automobile emissions. Germany gave financial incentives to buyers of cars that met US or ECE standards, with lesser credits available to those that partially fulfilled the requirements. These incentives had a strong impact; only 6.5 percent of new cars registered in Germany in 1988 did not meet any emissions requirements and 67.3 percent were compliant with the strictest US or ECE standards.[1]
Sweden was one of the first countries to instill stricter rules (for 1975), placing severe limitations on the number of vehicles available there. These standards also caused drivability problems and steeply increased fuel consumption - in part because manufacturers could not justify the expenditure to meet specific regulations that applied only in one very small market. In 1982, the European Community calculated that the Swedish standards increased fuel consumption by 9 percent, while it made cars 2.5 percent more expensive.[8] For 1983 Switzerland (and then Australia) joined in the same set of regulations, which gradually increased the number of certified engines.[9] One problem with the strict standards was that they did not account for catalyzed engines, meaning that vehicles thus equipped had to have the catalytic converters removed before they could be legally registered.
In 1985 the first catalyzed cars entered certain European markets such as Germany. At first, the availability of unleaded petrol was limited and sales were small. In Sweden, catalyzed vehicles became allowed in 1987, benefitting from a tax rebate to boost sales.[10] By 1989 the Swiss/Swedish emissions rules were tightened to the point that non-catalyzed cars were no longer able to be sold. In early 1989 the BMW Z1 was introduced, only available with catalyzed engines. This was a problem in some places like Portugal, where unleaded fuel was still almost non-existent, although European standards required unleaded gasoline to be "available" in every country by 1 October 1989.[11]
European Union
The European Union has its own set of emissions standards that all new vehicles must meet. Currently, standards are set for all road vehicles, trains, barges and 'nonroad mobile machinery' (such as tractors). No standards apply to seagoing ships or airplanes.
EU Regulation No 443/2009 sets an average CO2 emissions target for new passenger cars of 130 grams per kilometre. The target was gradually phased in between 2012 and 2015. A target of 95 grams per kilometre will apply from 2021.
For light commercial vehicle, an emissions target of 175 g/km applies from 2017, and 147 g/km from 2020,[12] a reduction of 16%.
The EU introduced Euro 4 effective January 1, 2008, Euro 5 effective January 1, 2010 and Euro 6 effective January 1, 2014. These dates had been postponed for two years to give oil refineries the opportunity to modernize their plants.
UK
Several local authorities in the UK have introduced Euro 4 or Euro 5 emissions standards for taxis and licensed private hire vehicles to operate in their area.[13][14][15] Emissions tests on diesel cars have not been carried out during MOTs in Northern Ireland for 12 years, despite being legally required.[16]
Germany
According to the German federal automotive office 37.3% (15.4 million) cars in Germany (total car population 41.3 million) conform to the Euro 4 standard from Jan 2009.
Asia
China
Due to rapidly expanding wealth and prosperity, the number of coal power plants and cars on China's roads is rapidly growing, creating an ongoing pollution problem. China enacted its first emissions controls on automobiles in 2000, equivalent to Euro I standards. China's State Environmental Protection Administration (SEPA) upgraded emission controls again on July 1, 2004 to the Euro II standard.[17] More stringent emission standard, National Standard III, equivalent to Euro III standards, went into effect on July 1, 2007.[18] Plans were for Euro IV standards to take effect in 2010. Beijing introduced the Euro IV standard in advance on January 1, 2008, becoming the first city in mainland China to adopt this standard.[19]
Hong Kong
From Jan 1, 2006, all new passenger cars with spark-ignition engines in Hong Kong must meet either Euro IV petrol standard, Japanese Heisei 17 standard or US EPA Tier 2 Bin 5 standard. For new passenger cars with compression-ignition engines, they must meet US EPA Tier 2 Bin 5 standard.
Current standard is Euro 6C, it has been phased in since 2019.
India
Bharat stage emission standards are emission standards instituted by the Government of India to regulate the output of air pollutants from internal combustion engine equipment, including motor vehicles. The standards and the timeline for implementation are set by the Central Pollution Control Board under the Ministry of Environment & Forests.
The standards, based on European regulations were first introduced in 2000. Progressively stringent norms have been rolled out since then. All new vehicles manufactured after the implementation of the norms have to be compliant with the regulations. By 2014, the country was under a combination of Euro 3 and Euro 4-based norms, with Euro 4 standards partly implemented in 13 major cities. Till April 2017, the entire country was under BS IV norms, which is based on Euro 4.[20]
As of now manufacturing and registration of BS VI vehicles has started, by April 2020 all BS VI manufacturing will be mandatory, respectively.[21][22]
Japan
Background
Starting June 10, 1968, the Japanese Government passed the (Japanese: Air Pollution Control Act) which regulated all sources of air pollutants. As a result of the 1968 law, dispute resolutions were passed under the 1970 (Japanese: Air Pollution Dispute Resolution Act). As a result of the 1970 law, in 1973 the first installment of four sets of new emissions standards were introduced. Interim standards were introduced on January 1, 1975 and again for 1976. The final set of standards were introduced for 1978.[23] While the standards were introduced they were not made immediately mandatory, instead tax breaks were offered for cars which passed them.[24] The standards were based on those adopted by the original US Clean Air Act of 1970, but the test cycle included more slow city driving to correctly reflect the Japanese situation.[25] The 1978 limits for mean emissions during a "Hot Start Test" of CO, hydrocarbons, and NOx were 2.1 grams per kilometre (3.38 g/mi) of CO, .25 grams per kilometre (0.40 g/mi) of HC, and .25 grams per kilometre (0.40 g/mi) of NOx respectively.[25] Maximum limits are 2.7 grams per kilometre (4.35 g/mi) of CO, .39 grams per kilometre (0.63 g/mi) of HC, and .48 grams per kilometre (0.77 g/mi) of NOx. One interesting detail of the Japanese emissions standards was that they were introduced in a soft manner; that is, 1978 model year cars could be sold that did not meet the 1978 standards, but they would suffer various tax penalties. This gave manufacturers breathing room to properly engineer solutions and also incentivized fixing the best-selling models first, leading to smoother adoption of clean air standards and fewer drivability concerns than in many other markets.
The "10 - 15 Mode Hot Cycle" test, used to determine individual fuel economy ratings and emissions observed from the vehicle being tested, use a specific testing regime.[26][27][28]
In 1992, to cope with NOx pollution problems from existing vehicle fleets in highly populated metropolitan areas, the Ministry of the Environment adopted the "(Japanese: Law Concerning Special Measures to Reduce the Total Amount of Nitrogen Oxides Emitted from Motor Vehicles in Specified Areas)", called in short The Motor Vehicle NOx Law. The regulation designated a total of 196 communities in the Tokyo, Saitama, Kanagawa, Osaka and Hyogo Prefectures as areas with significant air pollution due to nitrogen oxides emitted from motor vehicles. Under the Law, several measures had to be taken to control NOx from in-use vehicles, including enforcing emission standards for specified vehicle categories.
The regulation was amended in June 2001 to tighten the existing NOx requirements and to add PM control provisions. The amended rule is called the "Law Concerning Special Measures to Reduce the Total Amount of Nitrogen Oxides and Particulate Matter Emitted from Motor Vehicles in Specified Areas", or in short the Automotive NOx and PM Law.
- Emission Standards
The NOx and PM Law introduces emission standards for specified categories of in-use highway vehicles including commercial goods (cargo) vehicles such as trucks and vans, buses, and special purpose motor vehicles, irrespective of the fuel type. The regulation also applies to diesel powered passenger cars (but not to gasoline cars).
In-use vehicles in the specified categories must meet 1997/98 emission standards for the respective new vehicle type (in the case of heavy duty engines NOx = 4.5 g/kWh, PM = 0.25 g/kWh). In other words, the 1997/98 new vehicle standards are retroactively applied to older vehicles already on the road. Vehicle owners have two methods to comply:
- Replace old vehicles with newer, cleaner models
- Retrofit old vehicles with approved NOx and PM control devices
Vehicles have a grace period, between 8 and 12 years from the initial registration, to comply. The grace period depends on the vehicle type, as follows:
- Light commercial vehicles (GVW ≤ 2500 kg): 8 years
- Heavy commercial vehicles (GVW > 2500 kg): 9 years
- Micro buses (11-29 seats): 10 years
- Large buses (≥ 30 seats): 12 years
- Special vehicles (based on a cargo truck or bus): 10 years
- Diesel passenger cars: 9 years
Furthermore, the regulation allows fulfillment of its requirements to be postponed by an additional 0.5-2.5 years, depending on the age of the vehicle. This delay was introduced in part to harmonize the NOx and PM Law with the Tokyo diesel retrofit program.
The NOx and PM Law is enforced in connection with Japanese vehicle inspection program, where non-complying vehicles cannot undergo the inspection in the designated areas. This, in turn, may trigger an injunction on the vehicle operation under the Road Transport Vehicle Law.
Israel
Since January 2012 vehicles which do not comply with Euro 6 emission values are not allowed to be imported to Israel.
Turkey
Diesel and gasoline sulphur content is regulated at 10ppm.[29] Turkey currently follows Euro VI for heavy duty commercial vehicles,[30] and, in 2016 a couple of years after the EU, Turkey adopted Euro 6 for new types of light duty vehicles (LDV) and new types of passenger cars.[31] Turkey is planning to use the Worldwide harmonized light vehicles test procedure (WLTP).[32]
However, despite these tailpipe emission standards for new vehicle types there are many older diesel vehicles,[33] no low-emission zones and no national limit on PM2.5 particulates so local pollution, including from older vehicles, is still a major health risk in some cities, such as Ankara.[34][35] Concentrations of PM2.5 are 41 µg/m3 in Turkey, making it the country with the worst air pollution in Europe.[36] The regulation for testing of existing vehicle exhaust gases is Official Newspaper number 30004 published 11 March 2017.
An average of 135 g CO2/km for LDVs compared well with other countries in 2015,[37] however unlike the EU[38] there is no limit on carbon dioxide emissions.[39]
Africa
South Africa
South Africa's first clean fuels programme was implemented in 2006 with the banning of lead from petrol and the reduction of sulphur levels in diesel from 3 000 parts per million (ppm) to 500ppm, along with a niche grade of 50ppm.
The Clean Fuels 2 standard, expected to begin in 2017, includes the reduction of sulphur to 10ppm; the lowering of benzene from 5 percent to 1 percent of volume; the reduction of aromatics from 50 percent to 35 percent of volume; and the specification of olefins at 18 percent of volume.
Oceania
Australia
Australian emission standards are based on European regulations for light-duty and heavy-duty (heavy goods) vehicles, with acceptance of selected US and Japanese standards. The current policy is to fully harmonize Australian regulations with United Nations (UN) and Economic Commission for Europe (ECE) standards. In November 2013, the first stage of the stringent Euro 5 emission standards for light vehicles was introduced, which includes cars and light commercial vehicles.[40] The development of emission standards for highway vehicles and engines is coordinated by the National Transport Commission (NTC) and the regulations—Australian Design Rules (ADR)—are administered by the Department of Infrastructure and Transport.[41]
All new vehicles manufactured or sold in the country must comply with the standards, which are tested by running the vehicle or engine in a standardized test cycle.[42]
See also
- Air pollution
- C. Arden Pope
- Carbon dioxide equivalent
- The Center for Clean Air Policy (in the US)
- Emission factor
- Emission test cycle
- Emissions trading
- Environmental standard
- European emission standards
- Driving cycle
- Flexible-fuel vehicle
- Fuel efficiency
- Mobile Emission Reduction Credit (MERC)
- Motor vehicle emissions
- National Emissions Standards for Hazardous Air Pollutants
- Ultra-low-sulfur diesel
- Vehicle emissions control
References
- Dicorato, Giuseppe (January 1989). "Entriamo in Zona Verde" [Entering the Green Zone]. Quattroruote (in Italian). Vol. 34 no. 399. Milan, Italy: Editoriale Domus. p. 151.
- Dicorato, p. 152
- Archived November 20, 2008, at the Wayback Machine
- "Vehicle and Engine Regulations". Environment Canada. Jul 17, 2013.
- "How the California Air Resources Board (CARB) Works". howstuffworks.com. 12 September 2008. Retrieved 4 April 2018.
- Dicorato, p. 154
- "Das schadstoffarme Auto: Fragen und Antworten" [The clean car: Questions and Answers]. Die Welt (in German) (91): 5. 1985-04-19.
- Isakson, Börje, ed. (1982-10-06). "Avgaskrav slukar bensin" [Emissions requirements devour petrol]. Teknikens Värld (in Swedish). Vol. 34 no. 21. Stockholm, Sweden: Specialtidningsförlaget AB. p. 54.
- Hogsten, Dag E. (1982-10-06). "Alfa med ny spänst" [Alfa with new vitality]. Teknikens Värld (in Swedish). Vol. 34 no. 21. Stockholm, Sweden: Specialtidningsförlaget AB. p. 44.
- "Krav på katalysatorrening för alla bilar i trafik" [Demand for catalyzing all vehicles in traffic]. Motion No. 1997/98:Jo714 of 29 September 1997 (in Swedish). Riksdag [Swedish Parliament].
- Dicorato, p. 155
- International Council on Clean Transportation (January 2014). "EU CO2 standards for passenger cars and light-commercial vehicles". Retrieved 5 February 2014.
- "Taxi emissions ruling set for January start". Woking News & Mail. 18 October 2013. Retrieved 17 December 2013.
- "Chichester District Council: European emission standard EURO 4". Chichester District Council. Archived from the original on 2013-12-17. Retrieved 2013-12-13.
- "European technology emission standards: how to check your vehicle" (PDF). Plymouth City Council. Archived from the original (PDF) on 2013-12-17. Retrieved 2013-12-13.
- "MOT diesel test not performed in NI for 12 years". BBC Northern Ireland News. Retrieved 26 September 2018.
- "China to adopt auto emission standard equal to Euro III in 2008". Chinadaily.com.cn. 2004-07-07. Retrieved 2011-02-02.
- "China Launches Tougher Auto Emission Standard". English.cri.cn. Retrieved 2011-02-02.
- "China: Beijing launches Euro 4 standards". Automotiveworld.com. 2008-01-04. Retrieved 2011-02-02.
- Lathia, Rutvik; Dadhaniya, Sujal (2019-01-20). "Policy norms and proposed ways to achieve goals of Indian vehicle emission program". Journal of Cleaner Production. 208: 1339–1346. doi:10.1016/j.jclepro.2018.10.202. ISSN 0959-6526.
- Lathia, Rutvik; Dadhaniya, Sujal (2019-01-20). "Policy norms and proposed ways to achieve goals of Indian vehicle emission program". Journal of Cleaner Production. 208: 1339–1346. doi:10.1016/j.jclepro.2018.10.202. ISSN 0959-6526.
- {{Cite news|url=https://www.autocarindia.com/car-news/bs6-emission-norms-all-you-need-to-know-413968%7Ctitle=No
- Yamaguchi, Jack K. (1979), Lösch, Annamaria (ed.), "The Year of Uncertainty?", World Cars 1979, Pelham, NY: The Automobile Club of Italy/Herald Books: 61–62, ISBN 0-910714-11-8
- Yamaguchi, Jack K. (1977), "The Year of the Third Power", World Cars 1977, Pelham, NY: The Automobile Club of Italy/Herald Books: 54, ISBN 0-910714-09-6
- Yamaguchi, Jack K. (1978), Lösch, Annamaria (ed.), "Successes- Excesses", World Cars 1978, Pelham, NY: The Automobile Club of Italy/Herald Books: 61, ISBN 0-910714-10-X
- http://www.walshcarlines.com/pdf/Global%20Vehicle%20Emissions%20Standards%20Tables.pdf Japanese gasoline emission limits page 28
- "Emission Test Cycles: Japanese 10-15 Mode". www.dieselnet.com. Retrieved 4 April 2018.
- Various. "Fuel economy label generator". Fuel economy label generator. Retrieved 4 April 2018.
- (PDF) https://wedocs.unep.org/bitstream/handle/20.500.11822/17130/Turkey.pdf?sequence=1&isAllowed=y. Retrieved 7 February 2019. Missing or empty
|title=
(help) - "Left in the dust: Brazil might be the last major automotive market to adopt Euro VI standards". International Council on Clean Transportation. 23 May 2018.
- "THE AUTOMOTIVE SECTOR IN TURKEY A BASELINE ANALYSIS OF VEHICLE FLEET STRUCTURE, FUEL CONSUMPTION AND EMISSIONS" (PDF). International Council on Clean Transportation. Retrieved 6 February 2019.
- "New WLTP emissions test: when it's in force and how it could affect your car". Autocar. 17 April 2018.
- "Diesel cars increase by 116% in last 5 years in Turkey". Anadolu Agency. 10 February 2017.
- "Only six Turkish cities have clean air, report says". Ahval. 7 January 2018.
- "Air Pollution and Health in Turkey" (PDF). Health and Environment Alliance (HEAL). Retrieved 6 February 2019.
- "Mapped: Europe's Most and Least Polluted Countries". Retrieved 6 February 2019.
- "International comparison of light-duty vehicle fuel economy: Turkey" (PDF). Retrieved 7 February 2019.
- "CO2 emission standards for cars and vans: Council confirms agreement on stricter limits". European Council. Retrieved 7 February 2019.
- "Reducing vehicle emissions in Turkey". International Council on Clean Transportation. Retrieved 6 February 2019.
- Services, Department of Transport and Regional. "Vehicle Emission Standards". infrastructure.gov.au. Retrieved 2016-11-11.
- "Emission Standards: Australia: On-Road Vehicles and Engines". www.dieselnet.com. Retrieved 2016-11-11.
- Mortimore, Anna. "Australia's weaker emissions standards allow car makers to 'dump' polluting cars". The Conversation. Retrieved 2016-11-11.
External links
Wikisource has original text related to this article: |
- Dieselnet pages on vehicle emission standards.
- EPA National Vehicle and Fuel Emissions Laboratory.
- "Emission Standards Reference Guide" (PDF). (141 KB) for heavy duty and nonroad engines.
- Federal Income Tax Credits for Hybrids placed in service.
- Automotive Technology and Fuel Economy Trends: 1975 Through 2008
- EU
- "Directive 1999/94/EC of the European Parliament and of the Council of 13 December 1999, relating to the availability of consumer information on fuel economy and CO
2 emissions in respect of the marketing of new passenger cars" (PDF). (140 KB). - Council Directive 80/1268/EEC Fuel consumption of motor vehicles.