Vehicle blind spot

A blind spot in a vehicle is an area around the vehicle that cannot be directly observed by the driver while at the controls, under existing circumstances.[1] Blind spots exist in a wide range of vehicles: aircraft, cars, motorboats, sailboats, and trucks. Other types of transport have no blind spots at all, such as bicycles, horses, and motorcycles. Proper adjustment of mirrors and use of other technical solutions can eliminate or alleviate vehicle blind spots.

A-pillar blind spot

A no zone is one of several areas around a large truck, where the truck driver cannot see.[2] Collisions frequently occur in no zones.

In transport, driver visibility is the maximum distance at which the driver of a vehicle can see and identify prominent objects around the vehicle.[3] Visibility is primarily determined by weather conditions (see visibility) and by a vehicle's design.[4] The parts of a vehicle that influence visibility include the windshield, the dashboard and the pillars. Good driver visibility is essential to safe road traffic.

Sign used in some countries to warn of a blind spot ahead on the road

Blind spots may occur in the front of the driver when the A-pillar (also called the windshield pillar), side-view mirror, or interior rear-view mirror block a driver's view of the road. Behind the driver, cargo, headrests, and additional pillars may reduce visibility.

Adjusting mirrors to end side blind spots

If the side view mirrors of a car are adjusted in a particular way, there is no blind spot on the sides.[5][6][7][8] Such an arrangement can greatly reduce the probability of side swipes and other accidents, particularly during lane changes. This method was first revealed by George Platzer in a 1995 paper presented to the Society of Automotive Engineers.[5][7][8][9] The method is frequently overlooked in driver's education classes and takes some getting used to.[9][10] Calculated elimination of blind spots by properly trained drivers is inexpensive and obviates the need for costly technological solutions to that problem, provided drivers take the time to set up and use their mirrors effectively.[7][8] The arrangement—pointing the side-view mirrors substantially outboard in a fixed mechanical formula—is relatively simple to achieve, but it takes some knowledgeable effort and getting used to. It is reputed to be a lifesaver.[5][6][7][8][9][10]

However, one source considers that method a driving mistake and claims it is even more dangerous than not using it, because it creates other blind spots directly behind the vehicle—nine reasons are listed, e.g., when backing up—which are impossible to eliminate by a "shoulder check".[11][12]

Rearward invisibility is an entirely different matter. The area directly behind vehicles is the source of back-up collisions, particularly involving pedestrians, children, and objects directly aft of a vehicle. That area has been called a "killing zone".[12][13] These problems are the object of a number of technological solutions, including (in rough order of technological complexity, simplest first): rear-view mirror, side-view mirror, fresnel lens, sonar, parking sensors, and backup camera. A similar problem attaches to positions left and right of a vehicles' rear bumper as the driver attempts to back out of a parking space. Specially designed cross traffic alert warning systems have been developed to address these.[7][14][15]

Motor vehicles
The blue car's driver sees the green car through the mirrors but cannot see the red car without turning to check the blind spot (the mirrors are not properly adjusted)

As one is driving an automobile, blind spots are the areas of the road that cannot be seen while looking forward or through either the rear-view or side mirrors (expecting that the side mirrors are properly adjusted on a passenger auto – see above). The most common are the rear quarter blind spots, areas towards the rear of the vehicle on both sides. Vehicles in the adjacent lanes of the road that fall into these blind spots may not be visible using only the car's mirrors. Rear quarter blind spots can be:

  • checked by turning one's head briefly (risking rear-end collisions),
  • reduced by installing mirrors with larger fields-of-view, or
  • eliminated by reducing overlap between side and rear-view mirrors by adjusting side mirrors so the side of the car is barely visible when your head is between the front seats (for the right side mirror) and almost touching the drivers window (for the left side mirror), then checking to be sure you can see cars approaching from behind on either side when on the highway.[5][6][7][8]

Other areas that are sometimes called blind spots are those that are too low to see behind, in front, or to the sides of a vehicle, especially those with a high seating point.[16]

Forward visibility

This diagram shows the blocked view in a horizontal-plane in front of the driver. The front-end blind spots caused by this can create problems in traffic situations, such as in roundabouts, intersections, and road crossings. Front-end blind spots are influenced by the following design criteria:

  • Distance between the driver and the pillar
  • Thickness of the pillar
  • The angle of the pillar in a vertical plane side view
  • The angle of the pillar in a vertical plane front view
  • the form of the pillar straight or arc-form
  • Angle of the windshield
  • Height of the driver in relation to the dashboard
  • Speed of the opposite car
40° angle A-pillar bar blind spots

Effects of A-pillar angle on visibility
An accident caused in part by an A-pillar blind spot.

Most passenger cars have a diagonal pillar as shown in this side view. The angle between the horizon and A-pillar is approximately 40 degrees with a straight pillar that is not too thick. This gives the car a strong, aerodynamic body with an adequately sized front door.

vertical A-pillar having small blind spots

Panoramic windshield

The sides of a panoramic windshield are curved, which makes it possible to design vertical A-pillars that give the driver maximum forward visibility. However, it is impossible to design an aerodynamic small car with a vertical A-pillar because the more vertical the A-pillar is, the less space the door opening has, and the greater frontal area and coefficient of drag the vehicle will have.

Examples of cars with an almost vertical A-pillar:

A-pillar bars reduce driver visibility

Flat windshields

Some modern car designs have an extremely flat A-pillar angle with the horizon. For example, the Pontiac Firebird and Chevrolet Camaro from 1993 to 2002 had a windshield angle of 68° with the vertical, which equals just 22° with the horizon.[17]

A flatter A-pillar's advantages include reducing the overall drag coefficient and making the car body stronger in a frontal collision, at the expense of reducing driver visibility in a 180° field of view from left to right. A flatter A-pillar (and therefore windscreen) is also a factor when calculating the effects of a collision with a pedestrian. In general a flatter angle will result in a more gentle impact, directing the pedestrian "up and over" rather than directly into the windscreen. This is particularly true for cars like the Mercedes-Benz A-Class which also have a low angled engine cover.

Car with a "quarter glass", Visibility of short and tall drivers

Other disadvantages of a flat windshield angle
  • Other traffic can not see the driver through the reflection if the driver can see them.
  • The heater needs more time to heat the bigger window surface.
  • The flat windshield angle does not let snow slide off easily.
  • The driver cannot reach the whole flat window to clean it easily.

Height of the driver

Driver height can also affect visibility.

An A-pillar that is split up and has a small triangle window (Front Quarter glass) can give a short driver visibility problems. Some cars the windshield is fillet with the roof-line with a big radius. A fillet round A-pillar can give a tall driver visibility problems. Also sometimes the A-pillar can block the driver from seeing motorcyclists.

Also the B-pillar can block the vision of a tall driver in small 4 door cars.

Turning your head reduces blind spot

A driver may reduce the size of a blind spot or eliminate it completely by turning their head in the direction of the obstruction. This allows the driver to see better around the obstruction and allows the driver better depth perception.

Visibility in a convertible

Because there is no roof connection between the A- and B-pillars, the A-pillars of a convertible automobile have to be stronger and even thicker.

However, with the top down there are no B or C pillars, improving visibility behind the driver.

Windshield reflections
Sunlight dashboard reflection

Dashboard reflection

It is best if the dashboard has a non-reflecting dark colored surface.[18]

A small dashboard gives some reflection on the lower part of the windshield.

A big dashboard can give reflection on eye height.

A-pillar reflection

It is best if the inside of the A-pillar has a non-reflecting dark colored surface.[19]

If the side of the window is curved there is less A-pillar reflection. [20]

Light through roof reflection

Some new model cars have a very big sunroof. Sometimes the sunlight through the roof lights up the dashboard and gives a reflection in the windshield.

Other automobile design factors

Other design factors may prevent a manufacturer from maximizing visibility. These include safety, as narrower pillars cannot be made strong as easily as thicker pillars, and size restraints pertaining to aerodynamics, as taller, more vertical windshields create additional drag and reduce fuel efficiency. They also include fashion and cost, whereby design and appearance considerations can be deemed preeminent.

Volvo's previous parent Ford Motor Company has since adapted the system to its Ford, Lincoln, and Mercury brands.

This system was first introduced in the Volvo S80 sedan and produced a visible alert when a car entered the blind spot while a driver was switching lanes, using two door mounted lenses to check the blind spot area for an impending collision.

On Ford products, the system was first introduced in the spring of 2009 on the 2010 Ford Fusion and Fusion Hybrid, 2010 Mercury Milan and Milan Hybrid and 2010 Lincoln MKZ and Mazda 6. This technology was also introduced on the 2010 Mazda CX-9 Grand Touring model.

Some newer and more costly systems use side radar offering better performance and also warn of fast approaching vehicles entering the blind spot.

Boats
A blind spot in a (large) motorboat

Blind spots also exist in front of boats.[21] When the boat accelerates, the bow rises, increasing the size of the blind spot. Large vessels can have up to several hundreds of meters of blind spot. This is generally known as the dead visual range of a ship. To address this, cameras are sometimes placed in the front of the vessel to cover the missing field of view.

Blind spots exist where areas behind the sail are obscured from the view of a helmsman on a sailboat or windsurfer. This is especially true when they are heeled over; consequently, transparent windows are sometimes sewn into the sails.

gollark: Hey, maybe I can use the almost-working-maybe auction valuation function in order to narrow down candidates for actually sending to the server.
gollark: apioskwyiswegcygkqoq you utterly?
gollark: Hmm, I think the mysterious previous bidder was cyan.
gollark: interesting idea.
gollark: Actually, metainevitability just translates into normal inevitability, hm.

See also

References
  1. "Blind spot definition". Thefreedictionary.com. Retrieved 2011-11-13.
  2. "California Driver Handbook - Sharing the Road—Trucker's Blind Spots - The "No Zone"". State of California—Department of Motor Vehicles. 2017. Retrieved October 15, 2017.
  3. Fasimod Archived February 7, 2007, at the Wayback Machine
  4. "Wide-angle driver visibility and safety innovations distinguish Volvo BeeVan Truck Concept". Gizmag.com. 2007-03-09. Retrieved 2011-11-13.
  5. Platzer, George (February 1, 1995). "The Geometry of Automotive Rearview Mirrors - Why Blind Zones Exist and Strategies to Overcome Them – SAE Technical Paper 950601". Detroit, Michigan: Society of Automotive Engineers. doi:10.4271/950601. Retrieved August 9, 2013. Cite journal requires |journal= (help)
  6. "How To Eliminate The Dreaded "Blind Spot"". Retrieved August 9, 2013., which includes good illustrations of vision zones involved in proper adjustment.
  7. Jensen, Christopher (August 18, 2009). "Are Blind Spots a Myth?". The New York Times. Retrieved August 9, 2013.
  8. Quiroga, Tony; Philpot, Chris, Illustrator (March 2010). "How to Adjust Your Mirrors to Avoid Blind Spots". Car and Driver. Retrieved August 9, 2013.
  9. Pinola, Melanie (December 6, 2011). "Adjust Your Car Mirrors Properly To Avoid Accidents". Car and Driver. Retrieved August 29, 2014.
  10. Magliozzi, Tom; Magliozzi, Ray. "A Great New Way to Set Your Side View Mirrors" (PDF). Car Talk. Retrieved August 9, 2013.
  11. Wren, Eddie (2003). "Setting Outside Mirrors to the Correct Angle". Driving Myths and Misconceptions. Retrieved January 14, 2015.
  12. Wren, Eddie, Affiliated: Drive and Stay Alive, Inc. (April 16, 2007). "State Drivers' Manuals Can Kill Your Kids, SAE Technical Paper 2007-01-0445". Society of Automotive Engineers. doi:10.4271/2007-01-0445. Retrieved January 14, 2015. Cite journal requires |journal= (help)
  13. "The danger of blind zones: The area behind your vehicle can be a killing zone". Consumer Reports. Consumers Union. March 2012. Retrieved August 10, 2013.
  14. Ford Motor Company (2008). "See It, Hear It, Feel It: Ford Seeks Most Effective Driver Warnings for Active Safety Technology. Increased warnings indicate potentially hazardous lane changes". Gale, Cengage Learning/Free Library. Retrieved August 11, 2013.
  15. Automobile Blind-Spot Monitoring System, Tri-City Insurance News, January 27, 2006 Archived December 13, 2009, at the Wayback Machine
  16. smartmicro - Blind Spot Detection
  17. Camaro - Steve Statham - Google Books. Books.google.com. Retrieved 2011-11-13.
  18. http://esvc000873.wic017u.server-web.com/iPublish/archives/1/080.010.020/83/fs_nx_general_pack_8.pdf Archived October 1, 2007, at the Wayback Machine
  19. "Blindspots and Mirrors". Smart Learner Driving School. 2013-01-20. Archived from the original on 2014-09-11. Retrieved 2014-02-10.
  20. "Blind spot offenders named | Auto Express News | News". Auto Express. 2006-08-07. Retrieved 2011-11-13.
  21. "State v. Warren Haven". State of Maine. 2002-02-28. Archived from the original on 2011-07-16. Retrieved 2009-10-06.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.