Vertical replenishment

Vertical replenishment, or VERTREP is a method of supply of seaborne vessels by helicopter. The United States Department of Defense defines VERTREP as:

...the transfer of cargo between ships using helicopters. VERTREP is often used to supplement connected replenishment. Weapons loads, generally limited to 1,800 kg (4,000 pounds), are transferred from the supply ship to the flight deck of the amphibious ship. The decided advantage of a VERTREP is that it can effect replenishment without ship-to-ship connection.[2]

A MH-60S Knighthawk lifts cargo nets of supplies from the stern of USNS Supply
The hook-up man manually engages and disengages loads, while a second person holds a static discharge wand to ground the hook, preventing dangerous discharge.[1]

History

The United States Sixth Fleet had developed VERTREP routines in 1962 with SH-3 Sea King helicopters operating from USS Mississinewa and USS Altair.[3] Each ship carried one SH-3. At that time, there was some anticipation that nuclear-powered ships might reduce the need for alongside refueling. Altair performed the first night VERTREP to an aircraft carrier in 1965.[4]

Modern United States Navy VERTREP procedures were initiated from USS Sacramento in November 1964.[5] Sacramento embarked two CH-46 Sea Knight helicopters to enable simultaneous transfer of ammunition by helicopter while petroleum fuels were pumped through conventional alongside-hose connections. Ammunition could be delivered to other ships up to 100 miles from Sacramento. Receiving ships have greater freedom of maneuver during VERTREP than conventional alongside transfers; and time loss is minimal in comparison to maneuvering alongside and rigging transfer lines. One Cold War VERTREP was accomplished while the receiving United States destroyer maintained contact with a Soviet submarine.[5]

Transfer methods

VERTREP helicopters are equipped with a cargo hook from which may be suspended either special ordnance slings or conventional cargo nets for less sensitive loads. A normal load is two to four pallets, depending on weight. The load is placed in position on the deck of the receiving ship by lowering the helicopter slowly from a high hover, and the load can be released manually by a helicopter crewman positioned to watch the load.[6]

Rate of transfer

Ships without large flight decks or support equipment like forklifts are often unable to break down palleted loads and transfer them off of the receiving deck as rapidly as the helicopter can deliver another load.[7] VERTREP supply ships carrying more than one helicopter can simultaneously make deliveries to several ships of a task group. Food can be handled somewhat faster than munitions because of the reduced safety considerations.

Limitations

Lift capabilities of helicopters are reduced by adverse wind conditions or high temperature or humidity.[7] Pre-loading of pallets is necessary for rapid transfer, and requires advance knowledge of weather conditions and special care to secure light items which may otherwise be blown out of containers. While popular in use, VERTREP is considered relatively dangerous (as compared to other replenishment methods) as it involves danger to the loading personnel due to the helicopter and the load, and in turn, potential risks to the helicopter due to Foreign Object Damage (FOD).[8]

An MH-60S Knighthawk helicopter assigned to the "Dragon Whales" of Helicopter Combat Support Squadron Eight (HSC-28), flies between USS Harry S Truman and the Military Sealift Command ammunition ship USNS Mount Baker carrying a load of bombs, while conducting a vertical replenishment (VERTREP).
gollark: It's a shame CC can't interoperate with TIS-3D.
gollark: Also, redstone networking of some sort, that'd be cool.
gollark: Finally I can implement redstone-based code marginally more efficiently!
gollark: A redstone event? Cool!
gollark: ↑

See also
Forklifts prepare to receive cargo from an SH-60F Seahawk helicopter during a vertical replenishment on board the aircraft carrier USS John C. Stennis (CVN 74)

Notes
  1. Hookup and Release Procedures (from the 'globalsecurity.org' website. Accessed 2008-04-25.)
  2. OPNAVINST 8000.16 Volume II United States Department of Defense, 01 September 1999, Chapter 6, Page 6-3-3
  3. Polmar, Norman, "Historic Aircraft: The King of the Sea," Naval History, February 2012, p. 13.
  4. Nickodemus 1967, p. 115
  5. Pursley 1966, p. 183
  6. Pursley 1966, p. 185
  7. Pursley 1966, p. 184
  8. Replenishment Methods (from the 'tpub.com' website. Accessed 2008-04-25.)

References
  • Nickodemus, Gordon K., CAPT USN (April 1967). "Comment and Discussion: Vertical Replenishment and the UH-46A". United States Naval Institute Proceedings. Cite journal requires |journal= (help)CS1 maint: ref=harv (link)
  • Pursley, Charles R., LT USNR (November 1966). "Vertical Replenishment and the UH-46A". United States Naval Institute Proceedings. Cite journal requires |journal= (help)CS1 maint: ref=harv (link)

Media related to Vertical replenishment at Wikimedia Commons

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.