USS Tinsman (DE-589)

USS Tinsman (DE-589) was a Rudderow-class destroyer escort in service with the United States Navy from 1944 to 1946. She was sold for scrapping in 1973.

History
United States
Name: USS Tinsman
Namesake: Carl Welby Tinsman
Builder: Bethlehem-Hingham Shipyard
Laid down: 21 December 1943
Launched: 26 January 1944
Sponsored by: Mrs. James Corley, sister of Seaman Tinsman
Commissioned: 26 June 1944
Decommissioned: 11 May 1946
Stricken: 15 May 1972
Honors and
awards:		 Two battlestars
Fate: Sold for scrap, 1973
General characteristics
Class and type: Rudderow
Type: Destroyer escort
Displacement: 1,450 tons
Length: 306 feet
Beam: 36 feet, 10 inches
Draft: 9 feet 8 inches
Speed: 24 knots
Complement: 186
Armament:

History

Tinsman was laid down by the Bethlehem-Hingham Shipyard, Hingham, Massachusetts, on 21 December 1943; launched on 26 June 1944; sponsored by Mrs. James Corley, sister of Seaman Tinsman; and commissioned on 26 June 1944, Lt. William G. Grote, USNR, in command.

Following fitting out and trials, the destroyer got underway on 21 July 1944, proceeded to Bermuda on shakedown, and returned to Boston on 19 August. On 11 October, she departed Boston harbor and, the next day, joined a convoy bound, via the Panama Canal, for the South Pacific. She arrived at Seeadler Harbor in the Admiralty Islands late in November and, after training exercises, headed for New Guinea. On 2 December, she reached Hollandia, and was soon at sea again escorting a convoy to Leyte.

On 14 December, while Tinsman was in San Pedro Bay, a kamikaze plane grazed the bridge of a nearby tanker. A week later, the destroyer escort was back in New Guinea waters, anchoring in Humboldt Bay. The day after Christmas, she was on the move again, this time for waters off the Vogelkop Peninsula of New Guinea for antisubmarine patrol.

In the first days of the new year, she escorted a convoy to San Pedro Bay; then, on 6 January 1945, she departed Leyte to screen a convoy bound for Lingayen Gulf, Luzon. On 12 January—as Tinsman escorted a slow-moving group consisting of an oiler, tugs, and tows—kamikaze planes attacked her convoy. During the day, the American ships fought off four Japanese attackers, downing two of the planes. On the 13th, Tinsman's guns downed another Japanese aircraft. On the 14th, Tinsman anchored in Lingayen Gulf and retired the next day toward Leyte, arr:ving in San Pedro Bay on the 18th to prepare for the Bandings at Nasugbu, Luzon.

Tinsman departed Leyte Gulf on 27 January 1945 with Amphibious Group 8 and, on the 31st, arrived at Nasugbu Bay where troops of the 11th Airborne Division landed without serious opposition. That night a large number of Japanese Shinyo boats attacked the American ships. Armed with impact bombs, these small craft swarmed out of the darkness and attacked USS Lough (DE-586) as she patrolled not far from Tinsman. Tinsman provided illumination to assist Lough in defending herself, sinking at least six of the vessels. Tinsman departed Luzon on 2 February in a convoy bound for Mindoro. Throughout February, she shuttled between Mangarin Bay and Nasugbu Bay on escort duty.

Early in March, she left Leyte Gulf, bound for New Guinea. After taking on stores at Hollandia, Tinsman returned to the Philippines and resumed escort duty. In mid-April, she made a voyage to Palau; and, in July, she varied her routine of convoy duty with visits to Ulithi and Hollandia before returning to the Philippines.

Although the war ended in August, Tinsman remained in the Far East, operating mainly in the Philippines. She also made voyages to Hollandia and Tientsin before setting course for home on 29 November. Steaming via Eniwetok and Pearl Harbor, she arrived at San Pedro, California, on 18 December 1945.

She was later berthed at San Diego, where she was placed out of commission on 11 May 1946. On 15 May 1972, her name was struck from the Navy List; and, on 14 September 1973, her hulk was sold to Levin Metals Corporation, San Jose, California, for scrapping.

Tinsman received two battle stars for World War II service.

gollark: "If loops" don't exist.
gollark: You want to open the microcontroller's wireless card on whatever channel you want to use, then have it listen for modem_message events and handle the associated data. On the computer side, use the `broadcast` function with that channel and whatever data.
gollark: You need a wireless card in each.
gollark: https://ocdoc.cil.li/component:modem
gollark: Probably, if you have a more specific question.

See also

References
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.