USS Cobra (SP-626)

USS Cobra (SP-626) was a United States Navy patrol vessel in commission from 1917 to 1919 that operated during World War I. She originally was constructed as a private motorboat. After the conclusion of her U.S. Navy career, she served as the fishery patrol vessel USFS Petrel for the United States Bureau of Fisheries from 1919 to 1934, operating in the waters of the Territory of Alaska.

"MV Petrel" redirects here. For other ships named Petrel, see Petrel (disambiguation).
USS Cobra (SP-626) is at the center of this photograph taken in a New England port during World War I. An unidentified patrol boat is tied up inboard of her; the bows of the patrol boats USS Parthenia and USS Marold are visible at left, tied up alongside each other, with Parthenia inboard; and the submarine USS L-10 is in the foreground.
History
United States
Name: Cobra
Namesake: Cobra, the common name of various elapid snakes, most of which belong to the genus Naja
Cost: US$14,000
Completed: 1917
Fate: Sold to U.S. Navy 19 September 1917
United States Navy
Name: USS Cobra
Acquired: 19 September 1917
Commissioned: 4 November 1917 [1]
Identification: SP-626
Fate: Transferred to U.S. Bureau of Fisheries 9 September 1919
{ U.S. Bureau of Fisheries
Name: USFS Petrel
Namesake: Petrel, a tube-nosed seabird in the bird order Procellariiformes
Acquired: 9 September 1919
Decommissioned: 1934
Identification:
General characteristics (as private motorboat)
Type: Motorboat
Propulsion: 350–400 hp (260–300 kW) Dusenberg engine
Capacity: 7 passengers and crew
General characteristics (as U.S. Navy patrol boat)
Type: Patrol vessel
Length: 53.7 ft (16.4 m)
Propulsion: 350–400 hp (260–300 kW) Dusenberg engine
General characteristics (as BOF patrol boat)
Type: Fishery patrol vessel
Tonnage:
Length: 54 ft (16.5 m)
Beam: 11 ft (3.4 m)
Draft: 2.5 ft (0.8 m)
Propulsion:
Speed: 26 knots (48 km/h; 30 mph) (average)
Range: 8,400 nautical miles (15,600 km; 9,700 mi)

Construction

Cobra was built as a private motorboat of the same name at Lynn, Massachusetts, in 1917 at a cost of US$14,000. She had one mast and could accommodate seven passengers and crew.[3]

U.S. Navy service

On 19 September 1917, the U.S. Navy acquired Cobra for use as a section patrol boat during World War I. She was commissioned[4] as USS Cobra (SP-626) on 19 September 1917. Assigned to the 1st Naval District in northern New England, Cobra performed patrol duty for the rest of World War I.

World War I ended on 11 November 1918, and sometime thereafter the Navy decommissioned Cobra. Under an executive order dated 24 May 1919 addressing the disposition of vessels the Navy no longer required, Cobra was among several vessels designated for transfer to the United States Bureau of Fisheries (BOF).[3] The Navy duly transferred her to the BOF on 9 September 1919.

U.S. Bureau of Fisheries service
USFS Petrel in 1924.

Prior to Cobra's official transfer, the Bureau of Fisheries took possession of her at Quincy, Massachusetts, in July 1919 and renamed her USFS Petrel.[3] The BOF vessel USFS Phalarope towed Petrel and another former U.S. Navy patrol boat, the BOF vessel USFS Merganser, from Quincy to the Norfolk Navy Yard in Portsmouth, Virginia.[3] There Petrel and Merganser were loaded aboard the U.S. Navy collier USS Neptune on 3 October 1919.[3] Neptune transported them to the Puget Sound Navy Yard in Bremerton, Washington, arriving there in early 1920.[3] After they were unloaded, Petrel and Merganser were taken to Seattle, Washington, to undergo inspection.[3]

After the inspections were complete, Petrel and Merganser were loaded aboard the Pacific American Fisheries steamer Redwood, which transported them to Kings Cove, Territory of Alaska, where Redwood arrived on 18 June 1920.[3] The BOF intended to use them to conduct fishery patrols in the waters of Alaska, but withheld them from service, and instead sent them back to Seattle for repairs and to modify them for fishery patrol work as funds became available for the repairs and modifications.[3] Petrel′s modifications took place in early 1922; they involved general remodeling, re-decking, and the replacement of her original 350–400-horsepower (260–300 kW) Dusenberg engine with a more economical 25-horsepower (19 kW) Standard engine removed from the BOF vessel USFS Auklet when Auklet underwent an engine upgrade.[3] Early in the summer of 1922, Auklet towed Petrel to Wrangell, Territory of Alaska, from which Petrel finally began her annual patrol duties, operating in the waters of Southeast Alaska.[3]

Petrel's engine eventually broke down, and she was laid up during the 1926 fishing season.[3] After the installation of a new 50-horsepower (37 kW), four-cylinder Cummins engine, she resumed her patrol duties on 20 September 1927.[3] During 1930, she was involved in enforcing laws protecting fur seal populations near Sitka, Territory of Alaska.[3]

Petrel's last BOF service took place during the 1934 fishing season.[3] At the conclusion of the season, she was decommissioned at Seattle.[3]

Notes
  1. The Dictionary of Naval Fighting Ships's assertion at http://www.history.navy.mil/danfs/c10/cobra.htm that Cobra served in a non-commissioned status is corrected at Department of the Navy Naval History and Heritage Command Online Library of Selected Images: U.S. Navy Ships: USS Cobra (SP-626), 1917-1919.
  2. U.S. Department of Commerce Bureau of Navigation and Steamboat Inspection, Merchant Vessels of the United States (Including Yachts and Government Vessels), Year Ended June 30, 1933, Washington, D.C.: United States Government Printing Office, 1932, pp. 151, 1131.
  3. NOAA Fisheries Alaska Fisheries Science Center "AFSC Historical Corner: Petrel and Merganser, World War I Boats"
  4. The Dictionary of Naval Fighting Ships's assertion at http://www.history.navy.mil/danfs/c10/cobra.htm that Cobra served in a non-commissioned status is corrected at Department of the Navy Naval History and Heritage Command Online Library of Selected Images: U.S. Navy Ships: USS Cobra (SP-626), 1917-1919.
gollark: Well, if MInecraft has taught me anything, you can find uranium ore at about y=11 and then smelt it with some coal in a furnace made from 8 cubic metres of stone.
gollark: Why follow those rules? Just make nukes and threaten anyone who complains with nuclear annihilation.
gollark: smh not having your own 1MW power station at home
gollark: Everyone knows winmm.dll contains rogue AIs.
gollark: It doesn't want to be reverse-engineered.

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.