USS Buckingham (APA-141)

USS Buckingham (APA-141) was a Haskell-class attack transport acquired by the U.S. Navy during World War II for the task of transporting troops to and from combat areas.

History
United States
Name: USS Buckingham
Builder: California Shipbuilding Corporation
Laid down: 9 September 1944
Launched: 13 November 1944
Acquired: 23 January 1945
Commissioned: 23 January 1945
Decommissioned: 1 March 1946
Stricken: 20 March 1946
Fate: Sold for scrap, 23 January 1974
General characteristics
Class and type: Haskell-class attack transport
Displacement: 6,873 tons (lt), 14,837 t (fl)
Length: 455 ft (139 m)
Beam: 62 ft (19 m)
Draft: 24 ft (7 m)
Propulsion: 1 × geared turbine, 2 × header-type boilers, 1 × propeller, designed 8,500 shp (6,338 kW)
Speed: 17 knots (31 km/h; 20 mph)
Boats & landing
craft carried:
Capacity:
  • Troops: 86 officers, 1,475 enlisted
  • Cargo: 150,000 cu ft, 2,900 tons
Complement: 56 officers, 480 enlisted
Armament:

Buckingham (APA 141) was laid down on 9 September 1944 at Wilmington, California, by the California Shipbuilding Corp. under a Maritime Commission contract (MCV hull 57); launched on 13 November 1944; sponsored by Mrs. S. J. Dickey; towed to Vancouver, Washington, for completion by the Kaiser Shipbuilding Co.; transferred to the Navy on 23 January 1945; and commissioned that same day, Capt. Henry G. Moran in command.

World War II service

The attack transport conducted shakedown training off San Pedro, California, in February 1945 and then sailed to San Diego, California, for amphibious warfare training. She made numerous practice landings on beaches at Coronado, San Clemente, and Oceanside, California. Minor repairs of defects discovered during shakedown were corrected at Todd Shipyard in San Pedro. Buckingham then reported to the Commander, Western Sea Frontier, at San Francisco, California, for her first assignment, transportation of a cargo of ammunition and explosives to Pearl Harbor.

Sailing into the Pacific War zone

After loading her cargo at Port Chicago, California, the attack transport departed San Francisco Bay on 3 April and arrived at Pearl Harbor on 10 April. She waited at anchor there for nearly a week before putting to sea with a training group to practice fleet cruising, shiphandling, and amphibious landings at Maui. The ship returned to Pearl Harbor on the 28th, took on cargo, and embarked Army and Marine Corps troops for transportation to the Mariana Islands.

The attack transport sailed out of Pearl Harbor on 4 May in company with USS Clinton (APA-144), USS Pickaway (APA-222), SS Sea Sturgeon, and SS Evangeline. The convoy stopped at Eniwetok on 12 May for sailing directions, and Clinton and Buckingham, escorted by USS Southard (DMS-10), journeyed on to Guam. After discharging passengers there, the attack transport steamed eight hours northward to Saipan. Once again passengers disembarked, and new passengers, bound for Pearl Harbor, came on board. On 25 May, Buckingham sailed for Eniwetok and Hawaii, and arrived in Pearl Harbor on 4 June. Three days later the attack transport headed for San Francisco with a lighter load of passengers for repair of a split boiler. Its speed was limited to 7 knots and it was accompanied by one destroyer escort.

End-of-war operations

When Buckingham departed the United States on 28 June, she began a voyage that took her—via Pearl Harbor, Eniwetok, and Ulithi—to the Philippines and back to San Francisco, where she arrived on 17 August. News of the war's end reached the ship while she was still at sea, but she still had one more job to do. She hurriedly took on troops and cargo for passage to Pearl Harbor, continued on to Saipan and, on 22 September, steamed for Wakayama, Japan—carrying occupation forces—and landed her troops and cargo on Japanese soil on 27 September.

Post-war operations

The attack transport operated as part of the "Operation Magic Carpet" fleet on her return trip to San Francisco, carrying home over 1,800 veterans. In November, Buckingham made one more trip to Japan carrying occupation troops. She discharged some of her passengers at Sasebo on 25 November and proceeded to Nagasaki to disembark the rest. After embarking more than 1,500 returning servicemen, Buckingham crossed the Pacific Ocean for the last time.

Post-war decommissioning

Scheduled for inactivation, the ship made the long voyage to Norfolk, Virginia, early in 1946. She was decommissioned there on 1 March 1946 and was returned to the Maritime Commission on 5 March 1946. Her name struck from the Navy list on 20 March 1946. Placed in the Maritime Commission's National Defense Reserve Fleet at James River, Virginia, she remained there until January 1974 when she was sold to Consolidated Steel Corp., Brownsville, Texas, for scrapping.

gollark: WHO CARES™™™
gollark: And `ret` as `pop` then `ADD something whatever bees` to update the program counter.
gollark: It sounds like `call` could basically just be done as `push` with the assembler filling in the right location.
gollark: What, nothing else?
gollark: Do call/ret just do push/pop but store register state on the stack?

See also

References

This article incorporates text from the public domain Dictionary of American Naval Fighting Ships. The entry can be found here.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.