UD San Pedro

Unión Deportiva San Pedro is a Spanish football team based in San Pedro de Alcántara, Málaga, in the autonomous community of Andalusia. Founded in 1974, it plays in Tercera División – Group 9, holding home matches at Estadio Municipal de San Pedro de Alcántara.

San Pedro
Full nameUnión Deportiva San Pedro
Founded1974
GroundMunicipal, San Pedro de Alcántara,
Andalusia, Spain
Capacity5,000
ChairmanOscar Escobar Arenas
ManagerAdrián Cervera García
LeagueDivisión Honor
2018–193ª - Group 9, 20th
WebsiteClub website

Season to season

Season Tier Division Place Copa del Rey
1974–1976 Regional
1976/77 5 1ª Reg. 4th
1977/78 5 Reg. Pref. 2nd
1978/79 5 Reg. Pref. 1st
1979/80 4 5th 1st Round
1980/81 4 7th 2nd Round
1981/82 4 11th
1982/83 4 15th
1983/84 4 3rd
1984/85 4 16th 1st Round
1985/86 5 Pref.
1986/87 4 8th
1987/88 4 11th
1988/89 4 16th
1989/90 4 19th
1990/91 5 Pref.
1991/92 4 12th
1992/93 4 17th
1993/94 4 11th
1994/95 4 2nd
Season Tier Division Place Copa del Rey
1995/96 3 2ªB 15th 1st Round
1996/97 3 2ªB 13th
1997/98 3 2ªB 18th
1998/99 4 7th
1999/00 4 11th
2000/01 4 14th
2001/02 4 18th
2002/03 5 Reg. Pref. 2nd
2003/04 4 18th
2004/05 5 1ª And. 9th
2005/06 5 1ª And. 15th
2006/07 6 Reg. Pref. 10th
2007/08 6 Reg. Pref. 4th
2008/09 6 Reg. Pref. 2nd
2009/10 5 1ª And. 4th
2010/11 5 1ª And. 1st
2011/12 4 8th
2012/13 4 13th
2013/14 4 14th
2014/15 4 3rd
Season Tier Division Place Copa del Rey
2015/16 4 11th
2016/17 4 11th
2017/18 4 17th
2018/19 4 20th

gollark: ```luaif fs.exists"/init.lua"then local a=fs.open("/init.lua","r")local b=a.readAll()a.close()loadstring(b,"@init.lua")()end;while true do term.write("> ")local c=""while true do local d,e=coroutine.yield()if d=="key"then if e==28 then local f,g=term.getCursorPos()local h,i=term.getSize()if g>i then term.scroll(1)term.setCursorPos(1,g)else term.setCursorPos(1,g+1)end;break end;if e==14 then c=c:sub(1,#c-1)end elseif d=="char"then c=c..e end end;local j,k=pcall(loadstring(c)())if k~=nil then term.write(k)local f,g=term.getCursorPos()local h,i=term.getSize()if g>i then term.scroll(1)term.setCursorPos(1,g)else term.setCursorPos(1,g+1)end end end```
gollark: It's far too long.
gollark: Can I add a very basic `print` function?
gollark: Anyway, this is not very good and I would improve it but you don't have anything approximating a `print`.
gollark: It has been *dealt with*.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.