Triangle center

In geometry, a triangle center (or triangle centre) is a point in the plane that is in some sense a center of a triangle akin to the centers of squares and circles, that is, a point that is in the middle of the figure by some measure. For example the centroid, circumcenter, incenter and orthocenter were familiar to the ancient Greeks, and can be obtained by simple constructions.

This article is about a geometry concept. For the place in Lexington, Kentucky, see Triangle Center.

Each of these classical centers has the property that it is invariant (more precisely equivariant) under similarity transformations. In other words, for any triangle and any similarity transformation (such as a rotation, reflection, dilation, or translation), the center of the transformed triangle is the same point as the transformed center of the original triangle. This invariance is the defining property of a triangle center. It rules out other well-known points such as the Brocard points which are not invariant under reflection and so fail to qualify as triangle centers.

All centers of an equilateral triangle coincide at its centroid, but they generally differ from each other on scalene triangles. The definitions and properties of thousands of triangle centers have been collected in the Encyclopedia of Triangle Centers.

History

Even though the ancient Greeks discovered the classic centers of a triangle they had not formulated any definition of a triangle center. After the ancient Greeks, several special points associated with a triangle like the Fermat point, nine-point center, Lemoine point, Gergonne point, and Feuerbach point were discovered. During the revival of interest in triangle geometry in the 1980s it was noticed that these special points share some general properties that now form the basis for a formal definition of triangle center.[1][2][3] As of 20 June 2019, Clark Kimberling's Encyclopedia of Triangle Centers contains an annotated list of 32,784 triangle centers.[4]

Formal definition

A real-valued function f of three real variables a, b, c may have the following properties:

• Homogeneity: f(ta,tb,tc) = tⁿ f(a,b,c) for some constant n and for all t > 0.
• Bisymmetry in the second and third variables: f(a,b,c) = f(a,c,b).

If a non-zero f has both these properties it is called a triangle center function. If f is a triangle center function and a, b, c are the side-lengths of a reference triangle then the point whose trilinear coordinates are f(a,b,c) : f(b,c,a) : f(c,a,b) is called a triangle center.

This definition ensures that triangle centers of similar triangles meet the invariance criteria specified above. By convention only the first of the three trilinear coordinates of a triangle center is quoted since the other two are obtained by cyclic permutation of a, b, c. This process is known as cyclicity.[5][6]

Every triangle center function corresponds to a unique triangle center. This correspondence is not bijective. Different functions may define the same triangle center. For example the functions f₁(a,b,c) = 1/a and f₂(a,b,c) = bc both correspond to the centroid. Two triangle center functions define the same triangle center if and only if their ratio is a function symmetric in a, b and c.

Even if a triangle center function is well-defined everywhere the same cannot always be said for its associated triangle center. For example let f(a, b, c) be 0 if a/b and a/c are both rational and 1 otherwise. Then for any triangle with integer sides the associated triangle center evaluates to 0:0:0 which is undefined.

Default domain

In some cases these functions are not defined on the whole of ℝ³. For example the trilinears of X₃₆₅ are a^1/2 : b^1/2 : c^1/2 so a, b, c cannot be negative. Furthermore in order to represent the sides of a triangle they must satisfy the triangle inequality. So, in practice, every function's domain is restricted to the region of ℝ³ where a ≤ b + c, b ≤ c + a, and c ≤ a + b. This region T is the domain of all triangles, and it is the default domain for all triangle-based functions.

Other useful domains

There are various instances where it may be desirable to restrict the analysis to a smaller domain than T. For example:

• The centers X₃, X₄, X₂₂, X₂₄, X₄₀ make specific reference to acute triangles,
  namely that region of T where a² ≤ b² + c², b² ≤ c² + a², c² ≤ a² + b².
• When differentiating between the Fermat point and X₁₃ the domain of triangles with an angle exceeding 2π/3 is important,
  in other words triangles for which a² > b² + bc + c² or b² > c² + ca + a² or c² > a² + ab + b².
• A domain of much practical value since it is dense in T yet excludes all trivial triangles (ie points) and degenerate triangles
  (ie lines) is the set of all scalene triangles. It is obtained by removing the planes b = c, c = a, a = b from T.

Domain symmetry

Not every subset D ⊆ T is a viable domain. In order to support the bisymmetry test D must be symmetric about the planes b = c, c = a, a = b. To support cyclicity it must also be invariant under 2π/3 rotations about the line a = b = c. The simplest domain of all is the line (t,t,t) which corresponds to the set of all equilateral triangles.

Examples

A triangle (ΔABC) with centroid (G), incenter (I), circumcenter (O), orthocenter (H) and nine-point center (N)

Circumcenter

The point of concurrence of the perpendicular bisectors of the sides of triangle ABC is the circumcenter. The trilinear coordinates of the circumcenter are

a(b² + c² − a²) : b(c² + a² − b²) : c(a² + b² − c²).

Let f(a,b,c) = a(b² + c² − a²). Then

f(ta,tb,tc) = (ta) ( (tb)² + (tc)² − (ta)² ) = t³ ( a( b² + c² − a²) ) = t³ f(a,b,c) (homogeneity)

f(a,c,b) = a(c² + b² − a²) = a(b² + c² − a²) = f(a,b,c) (bisymmetry)

so f is a triangle center function. Since the corresponding triangle center has the same trilinears as the circumcenter it follows that the circumcenter is a triangle center.

1st isogonic center

Let A'BC be the equilateral triangle having base BC and vertex A' on the negative side of BC and let AB'C and ABC' be similarly constructed equilateral triangles based on the other two sides of triangle ABC. Then the lines AA', BB' and CC' are concurrent and the point of concurrence is the 1st isogonal center. Its trilinear coordinates are

csc(A + π/3) : csc(B + π/3) : csc(C + π/3).

Expressing these coordinates in terms of a, b and c, one can verify that they indeed satisfy the defining properties of the coordinates of a triangle center. Hence the 1st isogonic center is also a triangle center.

Fermat point

Let

${\displaystyle f(a,b,c)={\begin{cases}1&\quad {\text{if }}a^{2}>b^{2}+bc+c^{2}&({\text{equivalently }}A>2\pi /3),\\0&\quad {\text{if }}b^{2}>c^{2}+ca+a^{2}{\text{ or }}c^{2}>a^{2}+ab+b^{2}&({\text{equivalently }}B>2\pi /3{\text{ or }}C>2\pi /3),\\\csc(A+\pi /3)&\quad {\text{otherwise }}&({\text{equivalently no vertex angle exceeds }}2\pi /3).\end{cases}}}$

Then f is bisymmetric and homogeneous so it is a triangle center function. Moreover the corresponding triangle center coincides with the obtuse angled vertex whenever any vertex angle exceeds 2π/3, and with the 1st isogonic center otherwise. Therefore this triangle center is none other than the Fermat point.

Non-examples

Brocard points

The trilinear coordinates of the first Brocard point are c/b : a/c : b/a. These coordinates satisfy the properties of homogeneity and cyclicity but not bisymmetry. So the first Brocard point is not (in general) a triangle center. The second Brocard point has trilinear coordinates b/c : c/a : a/b and similar remarks apply.

The first and second Brocard points are one of many bicentric pairs of points,[7] pairs of points defined from a triangle with the property that the pair (but not each individual point) is preserved under similarities of the triangle. Several binary operations, such as midpoint and trilinear product, when applied to the two Brocard points, as well as other bicentric pairs, produce triangle centers.

Position vectors

Triangle centers can be written as following

${\displaystyle P={\frac {w_{A}A+w_{B}B+w_{C}C}{w_{A}+w_{B}+w_{C}}}.}$

Here, ${\displaystyle P,A,B,C}$ are position vectors, and, coordinates ${\displaystyle w_{A},w_{B},w_{C}}$ are scalars whose definition corresponds each center instances can be seen in the following table, where, ${\displaystyle a,b,c}$ are side lengths, and, ${\displaystyle S}$ is area of the triangle that Heron's formula can be utilized to get.

	${\displaystyle w_{A}}$	${\displaystyle w_{B}}$	${\displaystyle w_{C}}$	${\displaystyle w_{A}+w_{B}+w_{C}}$
Incenter	${\displaystyle a}$	${\displaystyle b}$	${\displaystyle c}$	${\displaystyle a+b+c}$
Excenter	${\displaystyle -a}$	${\displaystyle b}$	${\displaystyle c}$	${\displaystyle b+c-a}$
	${\displaystyle a}$	${\displaystyle -b}$	${\displaystyle c}$	${\displaystyle c+a-b}$
	${\displaystyle a}$	${\displaystyle b}$	${\displaystyle -c}$	${\displaystyle a+b-c}$
Centroid	${\displaystyle 1}$	${\displaystyle 1}$	${\displaystyle 1}$	${\displaystyle 3}$
Circumcenter	${\displaystyle a^{2}(b^{2}+c^{2}-a^{2})}$	${\displaystyle b^{2}(c^{2}+a^{2}-b^{2})}$	${\displaystyle c^{2}(a^{2}+b^{2}-c^{2})}$	${\displaystyle 16S^{2}}$
Orthocenter	${\displaystyle a^{4}-(b^{2}-c^{2})^{2}}$	${\displaystyle b^{4}-(c^{2}-a^{2})^{2}}$	${\displaystyle c^{4}-(a^{2}-b^{2})^{2}}$	${\displaystyle 16S^{2}}$

${\displaystyle a\equiv {\overline {BC}}={\sqrt {({\vec {BC}},{\vec {BC}})}},}$

${\displaystyle b\equiv {\overline {CA}}={\sqrt {({\vec {CA}},{\vec {CA}})}},}$

${\displaystyle c\equiv {\overline {AB}}={\sqrt {({\vec {AB}},{\vec {AB}})}},}$

${\displaystyle 16S^{2}=(a^{2}+b^{2}+c^{2})^{2}-2(a^{4}+b^{4}+c^{4}).}$

Some well-known triangle centers

Classical triangle centers

Encyclopedia of Triangle Centers reference	Name	Standard symbol	Trilinear coordinates	Description
X1	Incenter	I	1 : 1 : 1	Intersection of the angle bisectors. Center of the triangle's inscribed circle.
X2	Centroid	G	bc : ca : ab	Intersection of the medians. Center of mass of a uniform triangular lamina.
X3	Circumcenter	O	cos A : cos B : cos C	Intersection of the perpendicular bisectors of the sides. Center of the triangle's circumscribed circle.
X4	Orthocenter	H	tan A : tan B : tan C	Intersection of the altitudes.
X5	Nine-point center	N	cos(B − C) : cos(C − A) : cos(A − B)	Center of the circle passing through the midpoint of each side, the foot of each altitude, and the midpoint between the orthocenter and each vertex.
X6	Symmedian point	K	a : b : c	Intersection of the symmedians – the reflection of each median about the corresponding angle bisector.
X7	Gergonne point	Ge	bc/(b + c − a) : ca/(c + a − b) : ab/(a + b − c)	Intersection of the lines connecting each vertex to the point where the incircle touches the opposite side.
X8	Nagel point	Na	(b + c − a)/a : (c + a − b)/b: (a + b − c)/c	Intersection of the lines connecting each vertex to the point where an excircle touches the opposite side.
X9	Mittenpunkt	M	b + c − a : c + a − b : a + b − c	Various equivalent definitions.
X10	Spieker center	Sp	bc(b + c) : ca(c + a) : ab(a + b)	Incenter of the medial triangle. Center of mass of a uniform triangular wireframe.
X11	Feuerbach point	F	1 − cos(B − C) : 1 − cos(C − A) : 1 − cos(A − B)	Point at which the nine-point circle is tangent to the incircle.
X13	Fermat point	X	csc(A + π/3) : csc(B + π/3) : csc(C + π/3) *	Point that is the smallest possible sum of distances from the vertices.
X15 X16	Isodynamic points	S S′	sin(A + π/3) : sin(B + π/3) : sin(C + π/3) sin(A − π/3) : sin(B − π/3) : sin(C − π/3)	Centers of inversion that transform the triangle into an equilateral triangle.
X17 X18	Napoleon points	N N′	sec(A − π/3) : sec(B − π/3) : sec(C − π/3) sec(A + π/3) : sec(B + π/3) : sec(C + π/3)	Intersection of the lines connecting each vertex to the center of an equilateral triangle pointed outwards (first Napoleon point) or inwards (second Napoleon point), mounted on the opposite side.
X99	Steiner point	S	bc/(b^2 − c^2) : ca/(c^2 − a^2) : ab/(a^2 − b^2)	Various equivalent definitions.

(*) : actually the 1st isogonic center, but also the Fermat point whenever A,B,C ≤ 2π/3

Recent triangle centers

In the following table of more recent triangle centers, no specific notations are mentioned for the various points. Also for each center only the first trilinear coordinate f(a,b,c) is specified. The other coordinates can be easily derived using the cyclicity property of trilinear coordinates.

Encyclopedia of Triangle Centers reference	Name	Center function f(a,b,c)	Year described
X21	Schiffler point	1/(cos B + cos C)	1985
X22	Exeter point	a(b^4 + c^4 − a^4)	1986
X111	Parry point	a/(2a^2 − b^2 − c^2)	early 1990s
X173	Congruent isoscelizers point	tan(A/2) + sec(A/2)	1989
X174	Yff center of congruence	sec(A/2)	1987
X175	Isoperimetric point	− 1 + sec(A/2) cos(B/2) cos(C/2)	1985
X179	First Ajima-Malfatti point	sec^4(A/4)
X181	Apollonius point	a(b + c)^2/(b + c − a)	1987
X192	Equal parallelians point	bc(ca + ab − bc)	1961
X356	Morley center	cos(A/3) + 2 cos(B/3) cos(C/3)
X360	Hofstadter zero point	A/a	1992

General classes of triangle centers

Kimberling center

In honor of Clark Kimberling who created the online encyclopedia of more than 32,000 triangle centers, the triangle centers listed in the encyclopedia are collectively called Kimberling centers.[8]

Polynomial triangle center

A triangle center P is called a polynomial triangle center if the trilinear coordinates of P can be expressed as polynomials in a, b and c.

Regular triangle center

A triangle center P is called a regular triangle point if the trilinear coordinates of P can be expressed as polynomials in Δ, a, b and c, where Δ is the area of the triangle.

Major triangle center

A triangle center P is said to be a major triangle center if the trilinear coordinates of P can be expressed in the form f(A) : f(B) : f(C) where f(A) is a function of the angle A alone and does not depend on the other angles or on the side lengths.[9]

Transcendental triangle center

A triangle center P is called a transcendental triangle center if P has no trilinear representation using only algebraic functions of a, b and c.

Miscellaneous

Isosceles and equilateral triangles

Let f be a triangle center function. If two sides of a triangle are equal  (say a = b)  then

${\displaystyle f(a,b,c)=f(b,a,c)}$ (since a = b)

${\displaystyle \quad \quad \quad \quad =f(b,c,a)}$ (by bisymmetry)

so two components of the associated triangle center are always equal. Therefore all triangle centers of an isosceles triangle must lie on its line of symmetry. For an equilateral triangle all three components are equal so all centers coincide with the centroid. So, like a circle, an equilateral triangle has a unique center.

Excenters

Let

${\displaystyle f(a,b,c)={\begin{cases}-1&\quad {\text{if }}a\geq b{\text{ and }}a\geq c,\\\;\;\;1&\quad {\text{otherwise}}.\end{cases}}}$

This is readily seen to be a triangle center function and (provided the triangle is scalene) the corresponding triangle center is the excenter opposite to the largest vertex angle. The other two excenters can be picked out by similar functions. However as indicated above only one of the excenters of an isosceles triangle and none of the excenters of an equilateral triangle can ever be a triangle center.

Biantisymmetric functions

A function f is biantisymmetric if f(a,b,c) = −f(a,c,b) for all a,b,c. If such a function is also non-zero and homogeneous it is easily seen that the mapping (a,b,c) → f(a,b,c)² f(b,c,a) f(c,a,b) is a triangle center function. The corresponding triangle center is f(a,b,c) : f(b,c,a) : f(c,a,b). On account of this the definition of triangle center function is sometimes taken to include non-zero homogeneous biantisymmetric functions.

New centers from old

Any triangle center function f can be normalized by multiplying it by a symmetric function of a,b,c so that n = 0. A normalized triangle center function has the same triangle center as the original, and also the stronger property that f(ta,tb,tc) = f(a,b,c) for all t > 0 and all (a,b,c). Together with the zero function, normalized triangle center functions form an algebra under addition, subtraction, and multiplication. This gives an easy way to create new triangle centers. However distinct normalized triangle center functions will often define the same triangle center, for example f and (abc)⁻¹(a+b+c)³f .

Uninteresting centers

Assume a,b,c are real variables and let α,β,γ be any three real constants. Let

${\displaystyle f(a,b,c)={\begin{cases}\alpha &\quad {\text{ if }}a<b{\text{ and }}a<c\quad {\text{(equivalently the first variable is the smallest)}},\\\gamma &\quad {\text{ if }}a>b{\text{ and }}a>c\quad {\text{(equivalently the first variable is the largest)}},\\\beta &\quad \;{\text{otherwise}}\quad \;\quad \quad \,\quad {\text{(equivalently the first variable is in the middle)}}.\end{cases}}}$

Then f is a triangle center function and α : β : γ is the corresponding triangle center whenever the sides of the reference triangle are labelled so that a < b < c. Thus every point is potentially a triangle center. However the vast majority of triangle centers are of little interest, just as most continuous functions are of little interest. The Encyclopedia of Triangle Centers is an ever-expanding list of interesting ones.

Barycentric coordinates

If f is a triangle center function then so is af and the corresponding triangle center is af(a,b,c) : bf(b,c,a) : cf(c,a,b). Since these are precisely the barycentric coordinates of the triangle center corresponding to f it follows that triangle centers could equally well have been defined in terms of barycentrics instead of trilinears. In practice it isn't difficult to switch from one coordinate system to the other.

Binary systems

There are other center pairs besides the Fermat point and the 1st isogonic center. Another system is formed by X₃ and the incenter of the tangential triangle. Consider the triangle center function given by:

${\displaystyle f(a,b,c)={\begin{cases}\cos(A)\quad \;\quad \;\quad \;\quad \;\quad \;\quad \;\,\,{\text{if the triangle is acute}},\\\cos(A)+\sec(B)\sec(C)\quad {\text{if the vertex angle at }}A{\text{ is obtuse}},\\\cos(A)-\sec(A)\quad \;\quad \;\quad \;\,{\text{if either of the angles at }}B{\text{ or }}C{\text{ is obtuse}}.\end{cases}}}$

For the corresponding triangle center there are four distinct possibilities:

•   cos(A) : cos(B) : cos(C)     if the reference triangle is acute (this is also the circumcenter).
•   [cos(A) + sec(B)sec(C)] : [cos(B) − sec(B)] : [cos(C) − sec(C)]     if the angle at A is obtuse.
•   [cos(A) − sec(A)] : [cos(B) + sec(C)sec(A)] : [cos(C) − sec(C)]     if the angle at B is obtuse.
•   [cos(A) − sec(A)] : [cos(B) − sec(B)] : [cos(C) + sec(A)sec(B)]     if the angle at C is obtuse.

Routine calculation shows that in every case these trilinears represent the incenter of the tangential triangle. So this point is a triangle center that is a close companion of the circumcenter.

Bisymmetry and invariance

Reflecting a triangle reverses the order of its sides. In the image the coordinates refer to the (c,b,a) triangle and (using "|" as the separator) the reflection of an arbitrary point α : β : γ is γ | β | α. If f is a triangle center function the reflection of its triangle center is f(c,a,b) | f(b,c,a) | f(a,b,c) which, by bisymmetry, is the same as f(c,b,a) | f(b,a,c) | f(a,c,b). As this is also the triangle center corresponding to f relative to the (c,b,a) triangle, bisymmetry ensures that all triangle centers are invariant under reflection. Since rotations and translations may be regarded as double reflections they too must preserve triangle centers. These invariance properties provide justification for the definition.

Alternative terminology

Some other names for dilation are uniform scaling, isotropic scaling, homothety, and homothecy.

Hyperbolic triangle centers

The study of triangle centers traditionally is concerned with Euclidean geometry, but triangle centers can also be studied in hyperbolic geometry. Using gyrotrigonometry, expressions for trigonometric barycentric coordinates can be calculated that have the same form for both Euclidean and hyperbolic geometry. In order for the expressions to coincide, the expressions must not encapsulate the specification of the angle sum being 180 degrees.[10][11][12]

Tetrahedron centers and n-simplex centers

A generalization of triangle centers to higher dimensions is centers of tetrahedrons or higher-dimensional simplices.[12]

See also

• Central line
• Encyclopedia of Triangle Centers

Notes

1. List of classical and recent triangle centers: "Triangle centers". Retrieved 2009-05-23.
2. Summary of Central Points and Central Lines in the Plane of a Triangle (Accessed on 23 may 2009)
3. Kimberling, Clark (1994). "Central Points and Central Lines in the Plane of a Triangle". Mathematics Magazine. 67 (3): 163–187. doi:10.2307/2690608. JSTOR 2690608.
4. This is PART 17: Centers X(32001) - X(34000)
5. Weisstein, Eric W. "Triangle Center". MathWorld–A Wolfram Web Resource. Retrieved 25 May 2009.
6. Weisstein, Eric W. "Triangle Center Function". MathWorld–A Wolfram Web Resource. Retrieved 1 July 2009.
7. Bicentric Pairs of Points, Encyclopedia of Triangle Centers, accessed 2012-05-02
8. Weisstein, Eric W. "Kimberling Center". MathWorld–A Wolfram Web Resource. Retrieved 25 May 2009.
9. Weisstein, Eric W. "Major Triangle Center". MathWorld–A Wolfram Web Resource. Retrieved 25 May 2009.
10. Hyperbolic Barycentric Coordinates, Abraham A. Ungar, The Australian Journal of Mathematical Analysis and Applications, AJMAA, Volume 6, Issue 1, Article 18, pp. 1-35, 2009
11. Hyperbolic Triangle Centers: The Special Relativistic Approach, Abraham Ungar, Springer, 2010
12. Barycentric Calculus In Euclidean And Hyperbolic Geometry: A Comparative Introduction, Abraham Ungar, World Scientific, 2010

External links

• Manfred Evers, On Centers and Central Lines of Triangles in the Elliptic Plane
• Manfred Evers, On the geometry of a triangle in the elliptic and in the extended hyperbolic plane
• Clark Kimberling, Triangle Centers from University of Evansville
• Paul Yiu, A Tour of Triangle Geometry from Florida Atlantic University.