Tevilat Kelim
Tevilat Kelim (Hebrew: טבילת כלים, lit. 'immersion of vessels'), in Judaism, is the immersion of certain types of culinary utensils in a mikveh, on the occasion of their being acquired from a non-Jew.
Part of Judaic series of articles on |
Ritual purity in Judaism |
---|
![]() |
Purification methods |
Hierarchy |
Source
It is based upon Numbers 31:22-23: "Howbeit the gold, and the silver, the brass, the iron, the tin, and the lead, every thing that may abide the fire, ye shall make to go through the fire, and it shall be clean; nevertheless it shall be purified with the water of sprinkling; and all that abideth not the fire ye shall make to go through the water."
gollark: Thanks!
gollark: I think this is technically possible to implement, so bee⁻¹ you.
gollark: This is underspecified because bee² you, yes.
gollark: All numbers are two's complement because bee you.
gollark: The rest of the instruction consists of variable-width (for fun) target specifiers. The first N target specifiers in an operation are used as destinations and the remaining ones as sources. N varies per opcode. They can be of the form `000DDD` (pop/push from/to stack index DDD), `001EEE` (peek stack index EEE if source, if destination then push onto EEE if it is empty), `010FFFFFFFF` (8-bit immediate value FFFFFFFF; writes are discarded), `011GGGGGGGGGGGGGGGG` (16-bit immediate value GGGGGGGGGGGGGGGG; writes are also discarded), `100[H 31 times]` (31-bit immediate because bee you), `101IIIIIIIIIIIIIIII` (16 bits of memory location relative to the base memory address register of the stack the operation is conditional on), `110JJJJJJJJJJJJJJJJ` (16 bit memory location relative to the top value on that stack instead), `1111LLLMMM` (memory address equal to base memory address of stack LLL plus top of stack MMM), or `1110NNN` (base memory address register of stack MMM).Opcodes (numbered from 0 in order): MOV (1 source, as many destinations as can be parsed validly; the value is copied to all of them), ADD (1 destination, multiple sources), JMP (1 source), NOT (same as MOV), WR (write to output port; multiple sources, first is port number), RE (read from input port; one source for port number, multiple destinations), SUB, AND, OR, XOR, SHR, SHL (bitwise operations), MUL, ROR, ROL, NOP, MUL2 (multiplication with two outputs).
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.