Tartan 34 C

The Tartan 34 C is an American sailboat, that was designed by Sparkman & Stephens and first built in 1968. The boat is Sparkman & Stephens Design Number 1904.[1][2]

Tartan 34 C
Development
DesignerSparkman & Stephens
LocationUnited States
Year1968
Builder(s)Tartan Marine
Boat
Boat weight11,200 lb (5,080 kg)
Hull
TypeMonohull
ConstructionFiberglass
LOA34.42 ft (10.49 m)
LWL25.00 ft (7.62 m)
Beam10.17 ft (3.10 m)
Hull draft8.33 ft (2.54 m) with the centerboard down
Engine typeUniversal Atomic 4 30 hp (22 kW) gasoline engine
Hull appendages
Keel/board typefin keel
Ballast5,000 lb (2,268 kg)
Rudder(s)skeg-mounted rudder
Rig
GeneralMasthead sloop
I (foretriangle height)41.00 ft (12.50 m)
J (foretriangle base)14.00 ft (4.27 m)
P (mainsail luff)35.50 ft (10.82 m)
E (mainsail foot)13.50 ft (4.11 m)
Sails
Mainsail area239.63 sq ft (22.262 m2)
Jib/genoa area287.00 sq ft (26.663 m2)
Total sail area526.63 sq ft (48.926 m2)

The Tartan 34 C was initially marketed as the Tartan 34. When a later, unrelated design was introduced in 1984, it was also marketed as the Tartan 34. To differentiate the two designs the older one is commonly called the Tartan 34 C, with the "C" indicating Classic. The latter Tartan 34 became commonly known as the Tartan 34-2.[1]

Production

The Tartan 34 C was built by Tartan Marine in the United States between 1968 and 1978, with 525 examples completed, but it is now out of production.[1][3]

Design

The Tartan 34 C is a small recreational keelboat, built predominantly of fiberglass, with wood trim. It has a masthead sloop rig, a skeg-mounted rudder and a fixed stub keel, with a retractable centerboard. It displaces 11,200 lb (5,080 kg) and carries 5,000 lb (2,268 kg) of lead ballast. The boat has a draft of 8.33 ft (2.54 m) with the centerboard extended and 3.92 ft (1.19 m) with it retracted.[1]

The design had a factory option of a pilot berth in place of the port storage cabinet, over and outboard of the dinette, but few boats were so equipped. A yawl rig, with a mizzen mast, was also a factory option.[1]

The mainsail foot dimension (parameter "E") was reduced at least twice during the boat's production run, increasing the aspect ratio of the mainsail to improve sail balance and to lower the design's International Offshore Rule handicap rating. Hull serial numbers 125 to 200 have an "E" of 12.0 ft (3.7 m), while hull serial numbers 200 and later have an "E" of 10.5 ft (3.2 m).[1]

The boat is fitted with a Universal Atomic 4 gasoline engine of 30 hp (22 kW). The fuel tank holds 26 U.S. gallons (98 L; 22 imp gal) and the fresh water tank has a capacity of 36 U.S. gallons (140 L; 30 imp gal).[1]

The boat has a hull speed of 6.7 kn (12.41 km/h).[4]

gollark: Assuming you have access to paper.
gollark: You want the best combination of non-typoing and density.
gollark: Depends on the frequency of errors you expect.
gollark: You could do typo resistance with some sort of error correction thing.
gollark: You would probably write a program which decompresses and runs some other data you can write down more densely

See also

Similar sailboats

References
  1. Browning, Randy (2017). "Tartan 34 C sailboat specifications and details". sailboatdata.com. Retrieved 3 January 2018.
  2. Browning, Randy (2016). "Sparkman & Stephens". sailboatdata.com. Retrieved 18 January 2018.
  3. Browning, Randy (2017). "Tartan Marine 1971-". sailboatdata.com. Retrieved 18 January 2018.
  4. InterVisionSoft LLC (2018). "Sailboat Specifications for Tartan 34 C". Sailing Joy. Retrieved 18 January 2018.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.