Trimethylsilyl chloride

Trimethylsilyl chloride, also known as chlorotrimethylsilane is an organosilicon compound (silyl halide), with the formula (CH3)3SiCl, often abbreviated Me3SiCl or TMSCl. It is a colourless volatile liquid that is stable in the absence of water. It is widely used in organic chemistry.

Trimethylsilyl chloride
Ball-and-stick model of the trimethylsilyl chloride molecule
Space-filling model of the trimethylsilyl chloride molecule
Names
Preferred IUPAC name
Chloro(trimethyl)silane
Other names
Trimethylsilyl chloride
Chlorotrimethylsilane
TMSCl
Trimethylchlorosilane
TMCS
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.000.819
RTECS number
  • VV2710000
UNII
Properties
C3H9SiCl
Molar mass 108.64 g/mol
Appearance Colorless liquid, fumes in moist air
Density 0.856 g/cm3, liquid
Melting point −40 °C (−40 °F; 233 K)
Boiling point 57 °C (135 °F; 330 K)
reacts
-77.36·10−6 cm3/mol
Structure
tetrahedral at Si
Hazards
Flammable (F)
Corrosive (C)
R-phrases (outdated) R11, R14, R20, R21, R35, R37
S-phrases (outdated) S16, S26, S36, S37, S39, S45
NFPA 704 (fire diamond)
Flammability code 3: Liquids and solids that can be ignited under almost all ambient temperature conditions. Flash point between 23 and 38 °C (73 and 100 °F). E.g. gasolineHealth code 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasReactivity code 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g. white phosphorusSpecial hazard W: Reacts with water in an unusual or dangerous manner. E.g. sodium, sulfuric acid
3
3
2
Flash point −28 °C (−18 °F; 245 K)
400 °C (752 °F; 673 K)
Related compounds
Related halosilanes
Trimethylsilyl fluoride
Trimethylsilyl bromide
Trimethylsilyl iodide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Y verify (what is YN ?)
Infobox references

Preparation

TMSCl is prepared on a large scale by the Direct process, the reaction of methyl chloride with a silicon-copper alloy. The principal target of this process is dimethyldichlorosilane, but substantial amounts of the trimethyl and monomethyl products are also obtained.[1] The relevant reactions are (Me = CH3):

x MeCl + Si → Me3SiCl, Me2SiCl2, MeSiCl3, other products

Typically about 2-4% of the product stream is the monochloride, which forms an azeotrope with MeSiCl3.

Reactions and uses

TMSCl is reactive toward nucleophiles, resulting in the replacement of the chloride. In a characteristic reaction of TMSCl, the nucleophile is water, resulting in hydrolysis to give the hexamethyldisiloxane:

2 Me3SiCl + H2O → Me3Si-O-SiMe3 + 2 HCl

The related reaction of trimethylsilyl chloride with alcohols can be exploited to produce anhydrous solutions of hydrochloric acid in alcohols, which find use in the mild synthesis of esters from carboxylic acids and nitriles as well as, acetals from ketones. Similarly, trimethylsilyl chloride is also used to silanize laboratory glassware, making the surfaces more lipophilic.[2]

Silylation in organic synthesis

By the process of silylation, polar functional groups such as alcohols and amines readily undergo reaction with trimethylsilyl chloride, giving trimethylsilyl ethers and trimethylsilyl amines. These new groups "protect" the original functional group by removing the labile protons and decreasing the basicity of the heteroatom. The lability of the Me3Si-O and Me3Si-N groups can later be removed ("deprotected"). Trimethylsilylation can also be used to increase the volatility of a compound, enabling gas chromatography of normally nonvolatile substances such as glucose. Trimethylsilyl chloride also reacts with metal acetylides to give trimethylsilyl alkynes such as bis(trimethylsilyl)acetylene. Such derivatives are useful protected forms of alkynes.

In the presence of triethylamine and lithium diisopropylamide, enolisable aldehydes, ketones and esters are converted to trimethylsilyl enol ethers.[3] Despite their hydrolytic instability, these compounds have found wide application in organic chemistry; oxidation of the double bond by epoxidation or dihydroxylation can be used to return the original carbonyl group with an alcohol group at the alpha carbon. The trimethylsilyl enol ethers can also be used as masked enolate equivalents in the Mukaiyama aldol addition.

Other reactions

Trimethylsilyl chloride is used to prepare other trimethylsilyl halides and pseudohalides, including trimethylsilyl fluoride, trimethylsilyl bromide, trimethylsilyl iodide, trimethylsilyl cyanide, trimethylsilyl azide,[4] and trimethylsilyl trifluoromethanesulfonate (TMSOTf). These compounds are produced by a salt metathesis reaction between trimethylsilyl chloride and a salt of the (pseudo)halide (MX):

MX + Me3Si-Cl MCl + Me3Si-X

TMSCl, lithium, and nitrogen molecule react to give tris(trimethylsilyl)amine, under catalysis by nichrome wire or chromium trichloride:

3 Me3SiCl + 3 Li + 12 N
2
→ (Me3Si)3N + 3 LiCl

Using this approach, atmospheric nitrogen can be introduced into organic substrate. For example, tris(trimethylsilyl)amine reacts with α,δ,ω-triketones to give tricyclic pyrroles.[5]

Reduction of trimethylsilyl chloride give hexamethyldisilane:

2 Me3SiCl + 2 Na 2 NaCl + Me3Si-SiMe3
gollark: Quonauts 10: [DATA EXPUNGED]
gollark: Quonauts 10: MORE NONSENSE LAUNCH LASER BEES¡!!!
gollark: Quonauts 10: Quorum Not Achieved™
gollark: NO STEALTH PINGS
gollark: Yes, but there are probably libraries for it.

References

  1. Röshe, L.; John, P.; Reitmeier, R. "Organic Silicon Compounds". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a24_021.CS1 maint: multiple names: authors list (link)
  2. Such as in Norbert Zander and Ronald Frank (2005). "The use of polystyrylsulfonyl chloride resin as a solid supported condensation reagent for the formation of esters: Synthesis of N-[(9-fluorenylmethoxy)carbonyl]-L-aspartic acid; α tert-butyl ester, β-(2-ethyl[(1E)-(4-nitrophenyl)azo]phenyl]amino]ethyl ester". Organic Syntheses. 81: 235.
  3. Yoshihiko Ito, Shotaro Fujii, Masashi Nakatuska, Fumio Kawamoto, and Takeo Saegusa (1979). "One-Carbon Ring Expansion of Cycloalkanones to Conjugated Cycloalkenone: 2-Cyclohepten-1-one". Organic Syntheses. 59: 113.CS1 maint: multiple names: authors list (link); Collective Volume, 1, p. 327
  4. L. Birkofer and P. Wegner (1970). "Trimethylsilyl azide". Organic Syntheses. 50: 107.; Collective Volume, 6, p. 1030
  5. Brook, Michael A. (2000). Silicon in Organic, Organometallic, and Polymer Chemistry. New York: John Wiley & Sons. pp. 193–194.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.