TI-BASIC 83

TI-BASIC 83,TI-BASIC Z80 or simply TI-BASIC, is the built-in programming language for the Texas Instruments programmable calculators in the TI-83 series.[1] Calculators that implement TI-BASIC have a built in editor for writing programs. While the considerably faster Z80 assembly language[2]:120 is supported for the calculators, TI-BASIC's in-calculator editor and more user friendly syntax make it easier to use. TI-BASIC is interpreted.[2]:155

TI-BASIC 83
TI-BASIC Z80 code viewed on a TI-84 Plus CE
ParadigmProcedural
Typing disciplineStrong, Static (see Data types and variables)
PlatformTI-83 series,TI-84 Plus series programmable calculators

Syntax

The syntax for TI-BASIC 83 is significantly different compared to most dialects of BASIC. For example, the language does not permit indentation with whitespace characters. It also depends on the TI calculator character set because it is tokenized.[2]:25 Aside from these differences, TI-BASIC retains most control flow statements: conditionals, various loops, GOTOs and Labels. Conditionals and loops use End to denote the end of their bodies.

Each command can be placed on a new line, or separated by a colon for brevity. As such, the following snippets are identical in function.

:disp "FOO
:disp "BAR
and
:disp "FOO:disp "BAR

In the above example the closing double quotes can be omitted because the colon causes all open markers to be closed.

Unlike many high-level programming languages, TI-BASIC has only one assignment operator: →. The rightward arrow assigns the value on the left to the variable on the right.

Conditionals

TI-BASIC includes simple constructs using the If statement. When the If token does not have a Then token on the following line it will only execute the next single command.

:If condition
:command

Where condition is any boolean statement. One benefit of this format is brevity as it does not include Then and End. An If statement may have more than one command in its body if, instead of a command, a Then token is placed.

:If condition
:Then
:command
:command
:End

When using Then, the body must be closed by an End token. One more construct utilizes Else. This allows one of two bodies to be executed.

:If condition
:Then
:body one
:Else
:body two
:End

In this case the calculator evaluates condition, if it evaluates to true body one is executed, however, if condition evaluates to false, body two is executed. Unlike many other programming languages, TI-BASIC has no else if construct, or any switch statement.

It does, however, have a Menu( statement which allows a user to select one of a number of options. Similar to a switch menus do have fallthrough. The general syntax is Menu(, a quoted title string, and followed by quoted option name and label name. An example:

:Menu("TITLE","FIRST",1,"SECOND",2,"THIRD",3)
:Lbl 1
:body one
:Lbl 2
:body two
:Lbl 3
:body three
TI-84 Plus CE Menu example

The image is how the calculator renders the example above.

In terms of functionality, the Menu('s flow is similar to some switch statement and cases, with a key difference that the user supplies the switch's usual expression. Like many switches and cases, the Lbl allows fall-through. For example, in the code above, if a user selects "FIRST", all three bodies are executed. However, selecting "SECOND" means only the second and third bodies are executed.

Loops

TI-BASIC includes three types of loops: For(, While, and Repeat.

For(

For( is similar to many other languages. It will repeat commands either a set number of times, or a variable number.

:For(variable,start,end[,increment])
:body
:End

DS<( and IS>(

DS<( and IS>( are specialized conditionals that are similar in overall function to If statements. However, they have the unique property of changing the value of the given variable.

:DS<(variable,value)
:Command

Data types and variables

TI-BASIC is strongly and mostly statically typed. Most variables, besides lists and programs, have predefined names and allowed types. Each variable can usually only hold one data type, the exceptions are the numeric and all list variables which can hold either real or complex values.

Numeric

There are 27 numeric variables, A through Z, and θ.[2]:28 These can hold two types of values, real and complex. All numbers are stored in the RAM as floating-point numbers with 14-digit mantissa, or significand, and an exponent range of -128 to 127. Complex numbers are stored as two consecutive reals.

List

Lists are also supported through the use of six built-in lists, and user created lists with up to five characters as the name. They are capable of holding up to 999 elements. A list may hold entirely real numbers or entirely imaginary numbers. Some functions in the calculator are able to operate over entire lists, via Array programming.

Matrix

Matrices are supported through the use of ten built-in matrices. Matrices do not support user created names or complex numbers.

Other data types

The TI-83 family supports several more data types other than numeric, list, and matrix types: token based data, screen image data, and graph database data. These data types cannot be directly manipulated by TI-BASIC.

gollark: (or the other dependency which makes npm use sleepsort in critical parts of its dependency resolution process, using systems' real-world timers, and passing it intified strings interpreted as base256)
gollark: (or to the dependency I backdoored with code to remove any contraGTechuous influences)
gollark: Not even that can stand up to NPM.
gollark: Also, you are to make gibson install ÄBR.
gollark: But the new version has 89748912749819012749 dependencies. You could not *possibly* install it.

References
  1. "TI-84 Plus". education.ti.com.
  2. "TI-83 Plus Developer Guide" (PDF). Texas Instruments. Retrieved 15 April 2019.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.