Stolp Acroduster

The Acroduster I SA700 is an American single-seat homebuilt aerobatic biplane.

Acroduster I SA700
Role Homebuilt aerobatic biplane
National origin United States
Manufacturer Stolp Starduster Corporation
Designer Jim Osborne
Unit cost
$5,500 for a kit in 1975

Development

The Acroduster was an elliptical-winged biplane built with the intention of competing against the Pitts Special.

Design

The aircraft also owes some of its design to the Midget Mustang. The fuselage is of aluminum construction rather than the popular tube and fabric for the type. The wings are similar to the Stolp Starduster. Roll rate is 240 degrees per second.[1]

Variants

Specifications (Acroduster 1)

Data from Buy planes for sale[2]

General characteristics

  • Length: 15.8 ft (4.8 m)
  • Wingspan: 19 ft (5.8 m)
  • Wing area: 105 sq ft (9.8 m2)
  • Empty weight: 740 lb (336 kg)
  • Gross weight: 1,190 lb (540 kg)

Performance

  • Cruise speed: 143 kn (165 mph, 265 km/h)
  • Stall speed: 61 kn (70 mph, 113 km/h)
  • Range: 300 nmi (345 mi, 555 km)
  • Service ceiling: 12,000 ft (3,700 m)
  • Rate of climb: 3,000 ft/min (15 m/s)
gollark: The GTech trilaterator array just listens on the 128 channels most recently, er, transmitted on, as obtained by the Anavrins VLA.
gollark: SPUDNET is more suitable for that.
gollark: Encryption is your own problem.
gollark: Yes, ale?
gollark: You'd only need 2048 modems.

See also
  • Stolp SA-300 Starduster Too

Notes
  1. "Acroduster One pilot report". Airbum.com. Retrieved 2013-11-26.
  2. "Stolp Acroduster One SA700 Aircraft For Sale". Buyplanesforsale.com. Retrieved 2013-11-26.

References
  • Budd Davisson, Air Progress, 1975
  • Sport Aviation, August 1972 pp. 38 Stolp Arcroduster
  • Sport Aerobatics, August 1974 pp. 14 New Unlimited Machine - Acroduster I
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.