Stendal–Uelzen railway

The Stendal–Uelzen railway is a mostly single-track, electrified main line and connects Stendal in the east of Altmark, Saxony-Anhalt with Uelzen in Lower Saxony. The most important stop along the way is Salzwedel.

Stendal–Uelzen railway
The Uelzen–Stendal route
Overview
LocaleSaxony-Anhalt and Lower Saxony, Germany
Line number6899
Technical
Number of tracks2: Brunau-Packebusch to Rademin
Track gauge1,435 mm (4 ft 8 12 in) standard gauge
Electrification15 kV/16.7 Hz AC overhead catenary
Operating speed160 km/h (99 mph) (maximum)
Route number305
Route map

From Tangermünde
From Magdeburg
0.0
Stendal
To Wittenberge
To Wolfsburg
9.1
Steinfeld (b Stendal) Schönfeld until 1944
14.8
Kläden (Kr Stendal)
20.0
Hohenwulsch Bismark (Altm) until 1944
To Peulingen and to Kalbe
25.7
Meßdorf
32.0
Brunau-Packebusch
40.5
Fleetmark
45.0
Rademin
From Osterburg
49.4
Pretzier (Altm)
49.0
From Wittenberge
53.5
From Dannenberg
56.0
Salzwedel freight yard
From Diesdorf, Badel
57.1
Salzwedel
50.0
To Oebisfelde
70.2
Bergen (Dumme)
72.0
Nienbergen
76.2
Schnega
82.7
Varbitz
86.2
Soltendieck
90.3
Heuerstorf
93.6
93.7
Wieren
98.3
Stederdorf (Kr Uelzen)
From Hannover
107.5
Uelzen
Source: German railway atlas[1]

History

The Stendal–Uelzen line was originally opened in 1873 as part of a direct connection from Berlin to the naval base at Wilhelmshaven by the Magdeburg–Halberstadt Railway Company (MHE) and was opened as part of the so-called America Line.

In 1945, the line was cut by the Inner German border. West of the border a temporary terminus was created at Nienbergen as the former station in the Lower Saxon town of Bergen an der Dumme was 1,200 meters east of the Iron Curtain. The second track was removed in two phases in 1946 and the 1980s: first, the section from Wieren to Nienbergen was singled, then the second track was also removed between Wieren and Uelzen.

In the Soviet Zone, which became East Germany in 1949, trains initially ran between Stendal and Bergen. Border security measures were imposed between Salzwedel and Bergen on 7 October 1951 as Bergen station was only 1,200 meters from the border. Between Stendal and Salzwedel one of the two tracks was dismantled because the track material was supposedly needed for the construction of the Berlin outer ring.

After the fall of the Berlin Wall in 1990, the rebuilding of the Stendal–Salzwedel–Uelzen connection was added to the list of German Unity Transport Projects (Verkehrsprojekte Deutsche Einheit). The old line was completely rebuilt and established in 1999 as a single-track, electrified mainline railway and restored to operation. Part of the second track was also restored. The whole project took several years to complete. The 17.5 km long section between Brunau and district road 1005 in Klein Gartz now has two tracks and there is also an approximately one kilometre long passing loop west of the former Kläden station; the current Kläden station is now located further to the east on a single-track section. In addition, during the implementation of the German Unity Transport Project, all loading sidings near the line were dismantled and connecting sidings were reduced so that local freight movements are no longer possible on this line. The originally planned complete reconstruction of the line as a two-track line has not yet been realised.[2]

Current situation

In the 2010/11 timetable, the Regional-Express service RE 20 runs between Uelzen and Stendal every two hours and the Regionalbahn service RB 32 runs every two hours between Salzwedel and Stendal. Both services are operated by DB Regio. The RE services are operated with double-deck coaches mostly hauled by class 114 locomotives and the RB services are partly operated with class 425 EMUs. On Friday, an Intercity service is operated from Hamburg via Lüneburg, Uelzen and Stendal to Berlin, returning on Sunday. Until 13 December 2014, a train pair operated daily as a EuroCity on the Hamburg–Berlin–Wrocław route. Since April 2014, an InterRegio-Express has been operating the route from Berlin and Hamburg. During disruptions to long-distance traffic between Hamburg and Berlin services often also detour over the line via Wittenberg.

As part of a program to upgrade links between seaports and the hinterland, a second track was built from December 2012 to November 2013 in the Uelzen district of Veerßen to the east of the Stendal–Uelzen line, so that traffic coming from the direction of Stendal could run to the north without crossing the Hanover–Hamburg line.[3]

Future

The existing two-track section for crossing and overhauling between Brunau-Packebusch and Rademin, which is around 17.5 kilometre long, is to be extended to the east and west. This applies to the sections between Hohenwulsch and Brunaupark-Packebusch and between Rademin and Salzwedel. This involves a total of 22 km of additional second track at an estimated cost of about €57 million. The reason given for the project is to increase the capacity for freight and to improve the performance of regional traffic.[4] In July 2013, Deutsche Bahn put the project out to tender.[5] The estimated value of the contract, including overhead electrification, is €22 million, which is to be carried out between June 2014 and March 2016.[6]

Notes

  1. Eisenbahnatlas Deutschland (German railway atlas). Schweers + Wall. 2009. pp. 32–34. ISBN 978-3-89494-139-0.
  2. Wirtschaftlich bauen. Schneller fahren (in German). Berlin: Planungsgesellschaft Bahnbau Deutsche Einheit. 30 November 1997. p. 13. (brochure)
  3. "Bauarbeiten in Uelzen im Rahmen des Sofortprogramms "Seehafenhinterlandverkehr"" (Press release) (in German). 3 May 2013.
  4. Oliver Schumacher (28 December 2011). "Bahn und Bund investieren rund 57 Millionen Euro in Ausbau der Eisenbahnstrecke Stendal–Uelzen (73/2011)" (Press release) (in German). DB Mobility Networks Logistics.
  5. "Deutschland-Leipzig: Gleisbauarbeiten (document 2013/S 130-225260)" (in German). The Official Journal of the European Union online. 6 July 2013. Retrieved 16 April 2013.
  6. "Deutschland-Frankfurt am Main: Oberbauarbeiten (document 85822-2014)" (in German). The Official Journal of the European Union online. 13 March 2014. Retrieved 16 April 2013.
gollark: `(= (lim x 0 (/x x)) 1)` ← definitely very* readable and certainly much easier to parse.
gollark: It isn't simple. Rendering code for it is gigantic.
gollark: This is why we should replace inconsistent and hard to render maths notation with glorious S-expressions.
gollark: ... what even
gollark: There was some nice elegant explanation I forgot. IIRC it's something to do with the derivative of e^x being equal to itself.

References

  • Ralf Roman Rossberg (1991). Grenze über deutschen Schienen 1945–1990 (in German) (2 ed.). Freiburg: EK-Verlag. ISBN 3-88255-829-6.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.