Spähpanzer SP I.C.

The Spähpanzer SP I.C. (also known as SP 1.C. The "SP" in SP I.C. is short of Spähpanzer, German for "Scout Tank") was the experimental model of a West German reconnaissance scout light tank with anti-tank components. It was developed from 1956 in order to increase the anti-tank capabilities of reconnaissance tank battalions, but the project eventually declined. There are two blueprint prototype versions of the SP I.C. The single tank built can be seen in the Wehrtechnische Studiensammlung Koblenz.

Spähpanzer SP I.C., PT1 & PT2
The Spähpanzer SP I.C. PT2
TypeLight tank
Place of originGermany
Service history
In serviceNever saw service
Production history
DesignerHotchkiss; Klöckner-Humboldt-Deutz
Designed1956 ~ 1962
ManufacturerHotchkiss; Klöckner-Humboldt-Deutz
Unit costClassified
Produced1962
No. built1
Specifications
Mass8.92 t (8.78 long tons)
Length4.42 m (14 ft 6 in)
Width2.3 m (7 ft 7 in)
Height2.39 m (7 ft 10 in)
Crew3 (commander/gunner, driver, loader)

Armor10–15 mm (0.39–0.59 in)
Main
armament
1 × 90 mm Mercar (Mecar) or 1 x 90 mm Mercar mit "Mehrladeeinrichtung"
Secondary
armament
1 x MG42 GPMG or coaxial smoke grenade launchers
EngineHotchkiss 6-Zyl. Benzin 195/164/154 PS
195/164/154 hp
Power/weight30 PS (hp)/tonne
SuspensionHydropneumatic;
Traverse speeds:
PT1=40; PT2=44
Ground clearance400 mm
Fuel capacity270 litres; 85 litres reserve
Maximum speed 58 km/h (36 mph)

Specifications

  • Ground pressure - 0.68 kg/cm²
  • Climbing ability - 600 mm
  • Coupling - Single-plated dry clutch
  • Steering - Cletrac compensation steering gear
  • Brake - hydraulic disc with pump storage system
  • Drive - Torsion bar suspension with mechanical shock absorbers
  • Cannon barrel length - 2000 mm
  • Ammunition - Fin-stabilized projectile shaped HE charge or
    AP/APCR rounds
  • Muzzle velocity - AP or APCR = 630 m/s
    HE = 338 m/s
  • Maximum ammunition load - 18 - 50 rounds; depending on cannon

[1]

gollark: Indent by -4 spaces!
gollark: Or negative indentation.
gollark: What about 9-dimensional indentation?
gollark: Indent with 9.6+3i spaces.
gollark: I do agree that the borrow checker can be annoying, but at least you're more likely to get an application which works properly than with C(++).Most of the time higher-level languages are probably the answer anyway.

See also

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.