Software fault tolerance

Software fault tolerance is the ability of computer software to continue its normal operation despite the presence of system or hardware faults. Fault-tolerant software has the ability to satisfy requirements despite failures.[1][2]

Introduction

The only thing constant is change. This is certainly more true of software systems than almost any phenomenon,[3] not all software change in the same way so software fault tolerance methods are designed to overcome execution errors by modifying variable values to create an acceptable program state.[4] The need to control software fault is one of the most rising challenges facing software industries today. Fault tolerance must be a key consideration in the early stage of software development.

There exist different mechanisms for software fault tolerance, among which:

  • Recovery blocks
  • N-version software
  • Self-checking software

Operating system failure

Computer applications make a call using the application programming interface (API) to access shared resources, like the keyboard, mouse, screen, disk drive, network, and printer. These can fail in two ways.

  • Blocked Calls
  • Faults

Blocked calls

A blocked call is a request for services from the operating system that halts the computer program until results are available.

As an example, the TCP call blocks until a response becomes available from a remote server. This occurs every time you perform an action with a web browser. Intensive calculations cause lengthy delays with the same effect as a blocked API call.

There are two methods used to handle blocking.

  • Threads
  • Timers

Threading allows a separate sequence of execution for each API call that can block. This can prevent the overall application from stalling while waiting for a resource. This has the benefit that none of the information about the state of the API call is lost while other activities take place.

Threaded languages include the following.

AdaAfnixC++C#CILKEiffelErlang
JavaLispMagentaModula 3Napier 88OzPresto
pSatherPerl 5.8.7+PHPPythonRRubySmalltalk
Tcl/TkV

Timers allow a blocked call to be interrupted. A periodic timer allows the programmer to emulate threading. Interrupts typically destroy any information related to the state of a blocked API call or intensive calculation, so the programmer must keep track of this information separately.

Un-threaded languages include the following.

BashJavascriptSQLVisual Basic

Corrupted state will occur with timers. This is avoided with the following.

Faults

Fault are induced by signals in POSIX compliant systems, and these signals originate from API calls, from the operating system, and from other applications.

Any signal that does not have handler code becomes a fault that causes premature application termination.

The handler is a function that is performed on-demand when the application receives a signal. This is called exception handling.

The termination signal is the only signal that cannot be handled. All other signals can be directed to a handler function.

Handler functions come in two broad varieties.

  • Initialized
  • In-line

Initialized handler functions are paired with each signal when the software starts. This causes the handler function to startup when the corresponding signal arrives. This technique can be used with timers to emulate threading.

In-line handler functions are associated with a call using specialized syntax. The most familiar is the following used with C++ and Java.

try
{
API_call();
}
catch
{
signal_handler_code;
}

Hardware failure

Hardware fault tolerance for software requires the following.

Backup maintains information in the event that hardware must be replaced. This can be done in one of two ways.

  • Automatic scheduled backup using software
  • Manual backup on a regular schedule
  • Information restore

Backup requires an information-restore strategy to make backup information available on a replacement system. The restore process is usually time-consuming, and information will be unavailable until the restore process is complete.

Redundancy relies on replicating information on more than one computer computing device so that the recovery delay is brief. This can be achieved using continuous backup to a live system that remains inactive until needed (synchronized backup).

This can also be achieved by replicating information as it is created on multiple identical systems, which can eliminate recovery delay.


gollark: In space, nobody can hear you complain about bad aerodynamics.
gollark: *Technically*, you can, if you remove it from the head and disassemble it first.
gollark: If there was a *simple* way to make us heal better, it probably would be prevalent in people already. Or not work (in pre-technological humans) because of (now less significant) nutritional constraints or something, actually.
gollark: For all of the design flaws of the human body, it is very... well, optimized, until it hits a local maximum.
gollark: And what DNA to put there, and whether anything will horribly break if you meddle with it.

See also

References

  1. "Software Fault Tolerance". Carnegie Mellon University.
  2. "Portable and Fault Tolerant Software Systems" (PDF). Massachusetts Institute of Technology.
  3. Eckhardt, D. E., "Fundamental Differences in the Reliability of N-Modular Redundancy and N-Version Programming", The Journal of Systems and Software, 8, 1988, pp. 313–318.
  4. Ray Giguette and Johnette Hassell, “Toward A Resourceful Method of Software Fault Tolerance”, ACM Southeast regional conference, April, 1999.

Further reading

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.