Socket 5

Socket 5 was created for the second generation of Intel P5 Pentium processors operating at speeds from 75 to 120 MHz[1][2] as well as certain Pentium OverDrive and Pentium MMX processors with core voltage 3.3 V. It superseded the earlier Socket 4. It was released in March 1994.[3] Consisting of 320 pins, this was the first socket to use a staggered pin grid array, or SPGA, which allowed the chip's pins to be spaced closer together than earlier sockets. Socket 5 was replaced by Socket 7 in 1995.[4]

Socket 5

Type	ZIF
Chip form factors	SPGA
Contacts	320
FSB protocol	proprietary
FSB frequency	50, 60, or 66 MT/s
Voltage range	3.1 to 3.6 V
Processors	Intel P5 Pentium (75 - 120 MHz) Intel Pentium Overdrive (125 - 166 MHz) Intel Pentium Overdrive MMX (125 - 200 MHz) AMD K5 (PR75 - PR200) IDT WinChip (180 - 200 MHz) IDT WinChip-2 (200 - 240 MHz) IDT WinChip-2a (233 MHz) and compatible
Predecessor	Socket 4
Successor	Socket 7
This article is part of the CPU socket series

External links

• Differences between Socket 5 and Socket 7 (archived)

See also

• List of Intel microprocessors
• List of AMD microprocessors

References

1. "Pentium OverDrive Processor Socket Specification: Introduction". Intel Pentium Processor Family Developer's Manual (PDF). Intel. September 22, 1997. p. 17-1. Archived from the original (pdf) on October 14, 2011. Retrieved September 21, 2011. Socket 5 has been defined for the Pentium processor-based systems with core frequencies from 75 MHz to 120 MHz.
2. "OverDrive Processor Socket Specification: Socket 5". Datasheet for Intel Pentium processor 75/90/100/120/133/150/166/200 (pdf). Intel. September 22, 1997. p. 69. Retrieved September 21, 2011. Socket 5 does not support upgradability for 133 MHz or higher processors.
3. Torres, Gabriel. "A Complete List of CPU Sockets". Hardware Secrets. Archived from the original on 24 September 2014. Retrieved 23 September 2014.
4. Intel Socket 5 Specification, pcguide.com, retrieved 2009-03-31