Six Chuter SR1

The Six Chuter SR1 is an American powered parachute that was designed and produced by Six Chuter of Yakima, Washington.[1]

SR1
Role Powered parachute
National origin United States
Manufacturer Six Chuter
Status Production completed
Unit cost
US$11,000 (2001)

Design and development

The aircraft was designed to comply with the US FAR 103 Ultralight Vehicles rules, including the category's maximum empty weight of 254 lb (115 kg). It features a parachute-style high-wing, single-place accommodation, tricycle landing gear and a single 52 hp (39 kW) Rotax 503 engine in pusher configuration. The 64 hp (48 kW) Rotax 582 engine was a factory option.[1]

The aircraft is built from a combination of aluminium and 4130 steel tubing. In flight steering is accomplished via foot pedals that actuate the canopy brakes, creating roll and yaw. On the ground the aircraft has lever-controlled nosewheel steering. The aircraft was factory supplied in the form of an assembly kit that requires 40 hours to complete.[1]

Specifications (SR1)

Data from Cliche[1]

General characteristics

  • Crew: one
  • Wing area: 450 sq ft (42 m2)
  • Fuel capacity: 5 U.S. gallons (19 L; 4.2 imp gal)
  • Powerplant: 1 × Rotax 503 twin cylinder, two-stroke, air-cooled aircraft engine, 50 hp (37 kW)

Performance

  • Rate of climb: 500 ft/min (2.5 m/s)

gollark: That Sounds Quite Annoying.
gollark: osmarks internet radio™ streams at 15.625kBHz.
gollark: Millibytes per second?
gollark: Technically, any "per second" can be replaced with "Hertz".
gollark: Or, more commonly, k🐝Hz.

References
  1. Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, page D-14. Cybair Limited Publishing, 2001. ISBN 0-9680628-1-4


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.