Self-adaptive mechanisms

Self-adaptive mechanisms, sometimes simply called adaptive mechanisms, in engineering, are underactuated mechanisms that can adapt to their environment. One of the most well-known example of this type of mechanisms are underactuated fingers, grippers, and robotic hands. Contrary to standard underactuated mechanisms where the motion is governed by the dynamics of the system, the motion of self-adaptive mechanisms is generally constrained by compliant elements cleverly located in the mechanisms.

Flapping wing mechanism proposed by Leonardo da Vinci in the Codex Atlanticus.

Definition

Underactuated mechanisms have a lower number of actuators than the number of degrees of freedom (DOF). In a two-dimensional plane, a mechanism can have up to three DOF (two translations, one rotation), and in three-dimensional Euclidean space, up to six (three translations, three rotations). In the case of self-adaptive mechanisms, the lack of actuators is compensated by passive elements that constrain the motion of the system. Springs are a good example of such elements, but other can be used depending on the type of mechanisms.

One of the earliest example of self-adaptive mechanism is the flapping wing proposed by Leonardo da Vinci in the Codex Atlanticus.[1]

Underactuated hands
Self-adaptive motion of a linkage-driven finger.

The first commonly known underactuated finger was the Soft-Gripper designed by Shigeo Hirose in the late 1970s.[2] The most common type of transmission mechanisms used in self-adaptive hands are linkages and tendons.[3]

Kinetostatics

Underactuated fingers and hands are usually analyzed with respect to their kinetostatics (negligible kinetic energy, static analysis of a mechanism in motion) rather than the dynamics of the system, as the kinetic energy of these systems is generally negligible compared to the potential energy stored into the passive elements. The forces applied by each phalanx of an underactuated finger can be computed with the following expression:

where F is the vector made of the forces applied, J is the Jacobian matrix of the finger, T* is the transmission matrix, and t is the torque vector made (actuator and passive elements).[4]

Applications

A self-adaptive robotic hand, SARAH (Self-Adaptive Robot Auxiliary Hand), was designed and built to be part of the Dextre’s toolbox. Dextre is a robotic telemanipulator that resides at the end of CANADARM-2 on the International Space Station.[5] The Yale OpenHand is an example of open source self-adaptive mechanisms that can be found online.[6] Some companies are also selling self-adaptive hands for industrial purposes.[7] Prosthetics is another application for self-adaptive hands. One known example is the SPRING (Self-Adaptive Prosthesis for Restoring Natural Grasping) hand.[8]

Other examples

Self-adaptive mechanisms can be used for other applications, such as walking robots.[9][10]

Compliant mechanisms are another example of self-adaptive mechanisms, where the passive elements and the transmission mechanism are a single monolithic block.[11]

gollark: Anyway, it annoys me slightly that I can't actually vote in this election, but my vote does not actually count very much at all anyway because first-past-the-post is awful.
gollark: I hope they don't go ahead with the plan to cut homeless people in half.
gollark: Is there some reason you can't use "rockwriter"?
gollark: Well, that's safely disabled, so I can enjoy a sensible plaintext box until they force it on everyone.
gollark: In settings.

References
  1. Birglen, Lionel. "From flapping wings to underactuated fingers and beyond: a broad look to self-adaptive mechanisms" (PDF).
  2. Hirose, Shigeo; Umetani, Yoji (1978-01-01). "The development of soft gripper for the versatile robot hand". Mechanism and Machine Theory. 13 (3): 351–359. doi:10.1016/0094-114X(78)90059-9. ISSN 0094-114X.
  3. Underactuated Robotic Hands | Lionel Birglen | Springer.
  4. "Stiffness Analysis of Underactuated Fingers and Its Application to Proprioceptive Tactile Sensing - IEEE Journals & Magazine". doi:10.1109/TMECH.2016.2589546. Cite journal requires |journal= (help)
  5. "The Buddy System". Popular Science. Retrieved 2018-08-14.
  6. "Yale OpenHand Project".
  7. "Robotiq: Adaptive Grippers".
  8. Pons, José L. (2008). Wearable Robots: Biomechatronic Exoskeletons. John Wiley & Sons. pp. 269–278. ISBN 978-0470987650.
  9. "Design of a Self-Adaptive Robotic Leg Using a Triggered Compliant Element - IEEE Journals & Magazine". doi:10.1109/LRA.2017.2670678. Cite journal requires |journal= (help)
  10. ICI.Radio-Canada.ca, Zone Science -. "Perfectionner la démarche du robot de demain". Radio-Canada.ca (in French). Retrieved 2018-08-15.
  11. Howell, Larry L. (2001-08-03). Compliant Mechanisms. John Wiley & Sons. ISBN 9780471384786.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.