Rooftop water tower

A rooftop water tower is a variant of a water tower, consisting of a water container placed on the roof of a tall building.

Rooftop water towers atop apartment buildings on East 57th Street in New York City. The structures seen here illustrate three architectural approaches to incorporating these tanks in the design of a building. From left to right, a fully enclosed and ornately decorated brick structure, a simple unadorned roofless brick structure hiding most of the tank but revealing the top of the tank, and a simple utilitarian structure that makes no effort to hide the tanks or otherwise incorporate them into the design of the building.

This structure supplies water pressure to floors at higher elevation than public water towers.[1]

As building height increases, the vertical height of its plumbing also increases. This produces a large water column and the weight of this water produces very high pressure at the bottom of the column. Normally, this would require very thick (heavy-duty) plumbing to survive the pressure. Fittings at the bottom of the column would need pressure reducing valves to operate normally, and municipal water pressure would need to be very high to supply pressure to the top of the column.

Instead, the plumbing at various levels of the building are often sequestered, with pressure supplied from a rooftop water tower instead of the municipal supply. The tower itself is fed by a pump and a relatively high pressure line that carries water to the top of the building from the pipes below.

Maintenance

Regular cleaning of tanks in use is necessary, in order to prevent possible water contamination.[2] Cleaning a water tank usually takes about six hours depending on the size of the tank. Most tanks in New York City are around 12 ft high and similar in diameter. This process includes scraping away the sediment and any debris that the tank has accumulated, then the interior surfaces are cleaned with a chlorine solution. Routine inspection for holes and cracks is also necessary, to prevent the intrusion of contaminants. Any holes are calked with epoxy and the metal hoops used to secure the walls of the tank are tightened to spec.[3]

In 2009, New York City passed new laws forcing property owners to have their tanks inspected annually, with proof of inspection. Inspection reports must also be available to all tenants in the building. If any unsatisfactory results are found, the individual responsible for the building must immediately have the tank cleaned up to city safety standards. Failure to comply with these rules can lead to the imposition of fines on the property owner.[2][4]

gollark: The nim real-time-chat community is accessible on Discord, Gitter, Matrix *and* Freenode via some impressive bridging.
gollark: Unlike heavdrones.
gollark: Not fearsome.
gollark: `Uninitialised value was created by a stack allocation` - 🐝, this *is* in my code.
gollark: So I *should* fear it?

References
  1. Joseph, Sean (7 April 2009). "Water towers: NYC's misunderstood icons". amNewYork. Retrieved 6 August 2016.
  2. Runyeon, Ray Rivera, Frank G.; Buettner, Russ (2014-01-27). "Inside City's Water Tanks, Layers of Neglect". The New York Times. ISSN 0362-4331. Retrieved 2017-01-17.
  3. "Proper Maintenance is Essential - Rooftop Water Tanks". cooperator.com. Retrieved 2019-11-21.
  4. "water tanks | NYC Rules". rules.cityofnewyork.us. Retrieved 2019-11-21.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.