Ring Route (Nagoya Expressway)

The Nagoya Expressway Ring Route (名古屋高速道路都心環状線, Nagoya Kōsokudōro Toshinkanjōsen) is an urban expressway in Nagoya, Japan. It is a part of the Nagoya Expressway network and is owned and operated by Nagoya Expressway Public Corporation.

Nagoya Expressway Ring Route
名古屋高速道路都心環状線
Route information
Length10.3 km[1] (6.4 mi)
Existed1985–present
Major junctions
FromHigashi-Kataha Junction in Higashi-ku, Nagoya
Nagoya Expressway Kusunoki Route
ToHigashi-Kataha Junction in Higashi-ku, Nagoya
Nagoya Expressway Kusunoki Route
Highway system
National highways of Japan
Expressways of Japan

Overview

The Ring Route forms a rectangular loop around downtown Nagoya. It is one-way only and flows clockwise with 2 to 4 lanes of traffic. Routes 1 through 6 of the Nagoya Expressway network extend radially from the Ring Route (Route 2 bisects it). The Ring Route also serves as the origin point for these expressways.

The first section of the route was opened to traffic in 1985 and the route was completed in 1995.[2] The future Sannō Junction will link the Ring Route to Route 4 which is under construction.

Interchange list
No. Name Connections Notes Location
(all in Nagoya)
JCT Higashi-Kataha JCT Nagoya Expressway Kusunoki Route Higashi-ku
R01 Tōshinchō Exit
R02 Tōshinchō Entrance
JCT Marutamachi JCT Nagoya Expressway Higashiyama Route Marutamachi JCT ←→ Takabari JCT access only Naka-ku
JCT Tsurumai-minami JCT Nagoya Expressway Ōdaka Route Shōwa-ku
R03 Higashibetsuin Exit Naka-ku
R04 Higashibetsuin Entrance
JCT Sannō JCT Nagoya Expressway Tōkai Route Under construction Nakagawa-ku
JCT Shinsuzaki JCT Nagoya Expressway Manba Route Shinsuzaki JCT ←→ Nagoya-nishi JCT access only Nakamura-ku
R05 Nishikibashi Exit Naka-ku
R06 Meieki Entrance Meieki is the area around Nagoya Station. Nakamura-ku
JCT Meidōchō JCT Nagoya Expressway Kiyosu Route Nishi-ku
R07 Marunouchi Exit National Route 22 Naka-ku
R08 Marunouchi Entrance National Route 22
JCT Higashi-Kataha JCT Nagoya Expressway Kusunoki Route Higashi-ku
gollark: ```nimproc makeFilePath(basepath, page, filename: string): string = # putting tons of things into one directory may cause issues, so "shard" it into 256 subdirs deterministically let pageHash = getMD5(page) let hashdir = pageHash[0..1] # it is possible that for some reason someone could make two files/pages which normalize to the same thing # but are nevertheless different files # thus, put the hash of the ORIGINAL file/pagename before the shortened version let pagedir = pageHash[2..31] & "-" & normalizeFilename(page) let filenameHash = getMD5(filename) discard existsOrCreateDir(basepath / hashdir) discard existsOrCreateDir(basepath / hashdir / pagedir) basepath / hashdir / pagedir / (filenameHash & "-" & normalizeFilename(filename))```<@319753218592866315> is this ↑
gollark: There might also be a ROT13 button, if I feel like it.
gollark: Well, I was considering an option where you could use SQLCipher for data storage instead of SQLite.
gollark: Of course it does. It's important to know how susceptible your document is to frequency analysis if enciphered in certain ways.
gollark: Heavpoot wanted me to track "average letter frequency", and is also my alt sometimes, but that would be bad for performance probably.

References
  1. "Nagoya Expressway Route Map". Retrieved 2008-04-18.
  2. Ministry of Land, Infrastructure and Transport. "History of the Expressway Network in the Greater Nagoya Area". Archived from the original on 2008-03-28. Retrieved 2008-04-17.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.