Rhydyfelin (High Level) Halt railway station

Rhydyfelin (High Level) Halt railway station once served the village of Rhydyfelin in South Wales.

This article is about the former halt on the Pontyprid, Caerphily & Newport Railway. For the former halt on the Cardiff Railway, see Rhydyfelin (Low Level) Halt railway station.

Rhydyfelin High Level Halt
Location
PlaceRhydyfelin
AreaRhondda Cynon Taf
Coordinates51.5902°N 3.3137°W / 51.5902; -3.3137
Grid referenceST093886
Operations
Original companyPontypridd, Caerphilly and Newport Railway
Post-groupingGreat Western Railway
Platforms2
History
1 September 1904opens as Rhydyfelin Halt
1922renamed Rhydyfelin (High Level) Halt
14 May 1928re-sited
8 June 1953closed
Disused railway stations in the United Kingdom
Closed railway stations in Britain
A B C D–F G H–J K–L M–O P–R S T–V W–Z

History

The station opened in 1904 on the Pontypridd, Caerphilly and Newport Railway to cater to the new railmotor service on the line. As opened, it consisted of a single ground-level wooden platform made of old sleepers and a level crossing, also at ground-level. In 1922, the station was renamed to avoid confusion with the similarly-named halt on the former Cardiff Railway, which subsequently became Rhydyfelin (Low Level) Halt.[1] In 1928, the original halt was closed and a new one was built at 51.5886°N 3.3107°W / 51.5886; -3.3107 (Rhydyfelin (High Level) Halt, post-1928). This had two wooden platforms and a corrugated tin shelter.

Closure

The halt closed in 1953 and no trace of it remains. The trackbed is now part of the Treforest-Nantgarw cycleway.[2]

Preceding station   Disused railways   Following station
Treforest Halt
Line & station closed		   Great Western Railway
Pontypridd, Caerphilly & Newport Railway		   Dynea Halt
Line & station closed

Notes
  1. Hutton 1996, p. 77
  2. Hutton 1996, p.77
gollark: The resistor behaves ohmically and the current through both things is the same.
gollark: IIRC, if we assume the LED is an ideal diode, it'll just always have a 2V potential difference across it (if there's more than 2V in the circuit and also it is the right way round oops).
gollark: Well, that would actually have been right if you used the right units then added 2, possibly.
gollark: Not just... multiply... them?
gollark: I'm pretty sure you'd have to work out what voltage across the resistor would give you 20mA through it, then add 2 to it for the LED.

References
  • J. Hutton (1996) The Newport Docks & Railway Company. Silver Link Publishing
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.