Dynea Halt railway station

Dynea Halt was a railway station in Rhydyfelin near Pontypridd, Wales. It was a small halt on the Pontypridd, Caerphilly and Newport Railway, and closed in 1956.

Dynea Halt
Location
PlaceRhydyfelin
AreaRhondda Cynon Taf
Coordinates51.5833°N 3.3119°W / 51.5833; -3.3119
Grid referenceST098883
Operations
Original companyPontypridd, Caerphilly and Newport Railway
Post-groupingGreat Western Railway
Platforms2
History
1 September 1904opens as Dynea
1 July 1924renamed Dynea Halt
17 September 1956closed
Disused railway stations in the United Kingdom
Closed railway stations in Britain
A B C D–F G H–J K–L M–O P–R S T–V W–Z

History and description

Like the other halts on the line, Dynea opened in 1904 to cater for the local railmotor passenger services. In October 1908, the halt was badly damaged in a flood. An avalanche of water and rubble swept through the area before over-spilling into the Glamorganshire Canal. In 1924, the suffix 'halt' was added by the GWR.

Dynea had ground-level platforms with partially-open wooden shelters inside wooden enclosures. The gates of these would be unlocked when a train arrived. The shelters do not appear in later photographs, probably removed at some date before the 1950s. In 1931, the GWR added a down siding some 300 yards from Dynea Halt, controlled by the Dynea signal box. At some later date, a ground frame was added to control it, but this development was short-lived, and the siding was gone by 1943.[1]

Dynea closed in 1956, along with all the remaining halts on the line.

After closure

There are no traces remaining of the halt. The site is now part of the Nantgarw-Treforest cycle track.

Preceding station   Disused railways   Following station
Rhydyfelin (High Level) Halt
Line & station closed
  Great Western Railway
Pontypridd, Caerphilly & Newport Railway
  Upper Boat Halt
Line & station closed
gollark: It also produces nice not-actually-static-exactly binaries, which is useful for purposes.
gollark: Anyway, Nim:- is reasonably fast (even if certain libraries are beelike)- has nice syntax- has decent library existence- is able to bind to C stuff, which I have actually used in this because cmark-gfm is very fast- is fairly pleasant to write- has cool metaprogramming- has a compiler which mostly runs bearably fastthus I am using it.
gollark: `openring`, that is, which generates the "from other blogs" bit on my website.
gollark: Also, in the past I had to write about three lines of code to make a Go project faster, because despite Go's main thing being parallelism the authors did not bother to parallelize it despite it being trivially possible to do so.
gollark: Well, in my foolish youth I actually did use it a decent bit. I also used Apple products and was excited about Windows 10, so something.

References

  1. Hutton, J. The Newport Docks & Railway Company. Silver Link. 1996. p. 90
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.