Rake (geology)

In structural geology, rake (or pitch) is formally defined as "the angle between a line [or a feature] and the strike line of the plane in which it is found", measured on the plane. The three-dimensional orientation of a line can be described with just a plunge and trend. The rake is a useful description of a line because often (in geology) features (lines) follow along a planar surface. In these cases the rake can be used to describe the line's orientation in three dimensions relative to that planar surface. One might also expect to see this used when the particular line is hard to measure directly (possibly due to outcrops impeding measurement). The rake always sweeps down from the horizontal plane.

Fault motion

Rake is used to describe the direction of fault motion with respect to the strike (measured anticlockwise from the horizontal, up is positive; values between −180° and 180°):

  • left-lateral strike slip: rake near 0°
  • right-lateral strike slip: rake near 180°
  • normal: rake near −90°
  • reverse/thrust: rake near +90°
gollark: There are lots of block-based "programming" things now.
gollark: I wrote about this on my blog last year, which obviously makes me an expert™. While these things maybe *can* help with the general skill of being able to translate your complex and underspecified intentions into actual code, they aren't really *marketed* that way and thus are probably not taught usefully that way, and they're bad at, well, teaching programming directly.
gollark: According to my IQ test, I have an IQ of 600.
gollark: That did happen. Quite often.
gollark: It seems to have been a working strategy so far (well, for some things). Blatantly passing ridiculously broad internet monitoring laws, for example.

See also

References
    • G.H. Davis and S.J. Reynolds (1996). The structural geology of rocks and regions. 2nd Edition. Wiley. ISBN 0-471-52621-5.
    This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.