Protractor

A protractor is a measuring instrument, typically made of transparent plastic or glass, for measuring angles. Most protractors measure angles in degrees (°). Radian-scale protractors measure angles in radians. Most protractors are divided into 180 equal parts. Some precision protractors further divide degrees into arcminutes.

A half circle protractor marked in degrees (180°).

They are used for a variety of mechanical and engineering-related applications. One common use is in geometry lessons in schools.

Some protractors are simple half-discs. More advanced protractors, such as the bevel protractor, have one or two swinging arms, which can be used to help measure the angle.

Bevel protractor

A bevel protractor is a graduated circular protractor with one pivoted arm; used for measuring or marking off angles. Sometimes Vernier scales are attached to give more precise readings. It has wide application in architectural and mechanical drawing, although its use is decreasing with the availability of modern drawing software or CAD.

Universal bevel protractors are also used by toolmakers; as they measure angles by mechanical contact they are classed as mechanical protractors.[1][2]

The bevel protractor is used to establish and test angles to very close tolerances. It reads to 5 arcminutes (5′ or 1/12°) and can measure angles from 0° to 360°.

The bevel protractor consists of a beam, a graduated dial and a blade which is connected to a swivel plate (with Vernier scale) by thumb nut and clamp. When the edges of the beam and blade are parallel, a small mark on the swivel plate coincides with the zero line on the graduated dial. To measure an angle between the beam and the blade of 90° or less, the reading may be obtained direct from the graduation number on the dial indicated by the mark on the swivel plate. To measure an angle of over 90°, subtract the number of degrees as indicated on the dial from 180°, as the dial is graduated from opposite zero marks to 90° each way.

Since the spaces, both on the main scale and the Vernier scale, are numbered both to the right and to the left from zero, any angle can be measured. The readings can be taken either to the right or to the left, according to the direction in which the zero on the main scale is moved.

Reading the Vernier scale:

The bevel protractor Vernier scale may have graduations of 5′ (minutes) or 1/12°. Each space on the Vernier scale is 5′ less than two spaces on the main scale. Twenty four spaces on the Vernier scale equal in extreme length twenty three double degrees. Thus the difference between the space occupied by 2° on a main scale and the space of the Vernier scale is equal to one twenty-fourth of 2°, or 5′.

Read off directly from the main scale the number of whole degrees between 0 on this scale and the 0 of the Vernier scale. Then count, in the same direction, the number of spaces from the zero on the Vernier scale to a line that coincides with a line on the main scale; multiply this number by 5 and the product will be the number of minutes to be added to the whole number of degrees.

For example: Zero on the vernier scale has moved 28 whole degrees to the right of the 0 on the main scale and the 3rd line on the vernier scale coincides with a line upon the main scale as indicated. Multiplying 3 by 5, the product, 15, is the number of minutes to be added to the whole number of degrees, thus indicating a setting of 28 degrees and 15 minutes.

  • A 360° protractor marked in degrees.
  • A 400 gon protractor marked in gradians.
  • A "Cras Navigation Plotter" double-protractor, in foreground.
  • A half circle protractor marked in degrees (180°).
  • A set square with integrated protractor (180°).
gollark: Do you want the extra space to have things in it or not have things?
gollark: Hmm, good idea. What sort of features do you want?
gollark: This is why computer scientists should focus their efforts on building an infinitely fast computer.
gollark: All the fun stuff is.
gollark: What could you possibly be doing which somehow breaks support for particular GPUs?

See also

References
  1. Capotosto, Rosario (December 1993). "Bridge City Protractor". Tool Test. Popular Mechanics. p. 76. ISSN 0032-4558. Retrieved 12 April 2020.
  2. Farago, Francis T; Curtis (1994). Handbook of Dimensional Measurement. Industrial Press Inc. p. 580. ISBN 0-8311-3053-9.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.