Primitive cell

In geometry, biology, mineralogy (especially crystallography), and solid state physics, a primitive cell (also known as a primitive unit cell) is a minimum-volume unit cell corresponding to a single lattice point of a structure with discrete translational symmetry. The concept is used particularly in describing crystal structure in two and three dimensions, though it makes sense in all dimensions. A lattice can be characterized by the geometry of its primitive cell.

In some cases, the full symmetry of a crystal structure is not obvious from the primitive unit cell, in which cases a non-primitive unit cell (also known as a conventional unit cell) may be used. The volume of the non-primitive unit cell is always an integer multiple (typically 2, 3, or 4) of the primitive unit cell volume.[1]

The primitive cell is a primitive place. A primitive unit is a section of the tiling (usually a parallelogram or a set of neighboring tiles) that generates the whole tiling using only translations, and is as small as possible.

The primitive cell is a fundamental domain with respect to translational symmetry only. In the case of additional symmetries a fundamental domain is smaller.

Overview

A crystal can be categorized by its lattice and the atoms that lie in a primitive cell (the basis). A cell will fill all the lattice space without leaving gaps by repetition of crystal translation operations.

By definition, a primitive cell must contain exactly one and only one lattice point. For unit cells generally, lattice points that are shared by $n$ cells are counted as 1/ $n$ of the lattice points contained in each of those cells; so for example a primitive unit cell in three dimensions which has lattice points only at its eight vertices is considered to contain 1/8 of each of them.[2] An alternative conceptualization is to consistently pick only one of the $n$ lattice points to belong to the given unit cell (so the other $1-n$ lattice points belong to adjacent unit cells).

Two dimensions

The parallelogram is the general primitive cell for the plane.

A 2-dimensional primitive cell is a parallelogram, which in special cases may have orthogonal angles, or equal lengths, or both.

	2D primitive unit cells			2D non-primitive unit cells

Shape name	Parallelogram	Rectangle	Square	Rhombus
Bravais lattice	Primitive Monoclinic	Primitive Orthorhombic	Primitive Tetragonal	Centered Orthorhombic

Three dimensions

A parallelepiped is a general primitive cell for 3-dimensional space.

The primitive translation vectors $a \to 1$ , $a \to 2$ , $a \to 3$ span a lattice cell of smallest volume for a particular three-dimensional lattice, and are used to define a crystal translation vector

{\vec {T}}=u_{1}{\vec {a}}_{1}+u_{2}{\vec {a}}_{2}+u_{3}{\vec {a}}_{3},

where $u 1$ , $u 2$ , $u 3$ are integers, translation by which leaves the lattice invariant.[note 1] That is, for a point in the lattice $r$ , the arrangement of points appears the same from $r' = r + T \to$ as from $r$ .[3]

Since the primitive cell is defined by the primitive axes (vectors) $a \to 1$ , $a \to 2$ , $a \to 3$ , the volume $V p$ of the primitive cell is given by the parallelepiped from the above axes as

V_{\mathrm {p} }=\left|{\vec {a}}_{1}\cdot ({\vec {a}}_{2}\times {\vec {a}}_{3})\right|.

For any 3-dimensional lattice, you can find primitive cells which are parallelepipeds, which in special cases may have orthogonal angles, or equal lengths, or both. While not mathematically required, by convention, one usually defines the parallelepiped primitive cell so that there is a lattice point on each corner. When the lattice points are on the corner, each lattice point is shared by eight different primitive cells, so each lattice point will contribute only 1/8 of a lattice point to each of those cells. However, there are eight corners, so there is still a total of one lattice point per cell, as required by definition. Some of the fourteen three-dimensional Bravais lattices are represented using such parallelepiped primitive cells, as shown below.

3D primitive unit cells

Shape name	Parallelepiped	Oblique rectangular prism	Rectangular cuboid	Square cuboid	Cube
Bravais lattice	Primitive Triclinic	Primitive Monoclinic	Primitive Orthorhombic	Primitive Tetragonal	Primitive Cubic

The other Bravais lattices also have a primitive unit cell in the shape of a parallelepiped, but in order to allow easy discrimination on the basis of symmetry, they are conventionally represented by a non-primitive unit cell which contains more than one lattice point.

3D non-primitive unit cells

Shape name	Oblique rhombic prism	Right rhombic prism	Trigonal trapezohedron
Bravais lattice	Base-centered Monoclinic	Base-centered Orthorhombic	Rhombohedral

Wigner–Seitz cell

An alternative to the unit cell, for every Bravais lattice there is another kind of primitive cell called the Wigner–Seitz cell. In the Wigner–Seitz cell, the lattice point is at the center of the cell, and for most Bravais lattices, the shape is not a parallelogram or parallelepiped. This is a type of Voronoi cell. The Wigner–Seitz cell of the reciprocal lattice in momentum space is called the Brillouin zone.

gollark: Really?

gollark: In accordance with the PotatOS privacy policy, clause 2.6.

gollark: They *will* be informed.

gollark: But that would reveal who they are to you. How outrageous.

gollark: LyricLy is DENYING the needs of the COMMUNITY.

Notes

In $n$ dimensions the crystal translation vector would be
${\vec {T}}=\sum _{i=1}^{n}u_{i}{\vec {a}}_{i},\quad {\mbox{where }}u_{i}\in \mathbb {Z} \quad \forall i.$
That is, for a point in the lattice $r$ , the arrangement of points appears the same from $r' = r + T \to$ as from $r$ .

References

Ashcroft, Neil W. (1976). Solid State Physics. W. B. Saunders Company. p. 73. ISBN 0-03-083993-9.
"DoITPoMS – TLP Library Crystallography – Unit Cell". Online Materials Science Learning Resources: DoITPoMS. University of Cambridge. Retrieved 21 February 2015.
Kittel, Charles. Introduction to Solid State Physics (8 ed.). Wiley. p. 4. ISBN 978-0-471-41526-8.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

[first-3] In $n$ dimensions the crystal translation vector would be
${\vec {T}}=\sum _{i=1}^{n}u_{i}{\vec {a}}_{i},\quad {\mbox{where }}u_{i}\in \mathbb {Z} \quad \forall i.$
That is, for a point in the lattice $r$ , the arrangement of points appears the same from $r' = r + T \to$ as from $r$ .

[1] Ashcroft, Neil W. (1976). Solid State Physics. W. B. Saunders Company. p. 73. ISBN 0-03-083993-9.

[doitpoms-2] "DoITPoMS – TLP Library Crystallography – Unit Cell". Online Materials Science Learning Resources: DoITPoMS. University of Cambridge. Retrieved 21 February 2015.

[4] Kittel, Charles. Introduction to Solid State Physics (8 ed.). Wiley. p. 4. ISBN 978-0-471-41526-8.