Pozhuthana

Pozhuthana is a village in Wayanad district in the state of Kerala, India.[1]

Pozhuthana
village
Country India
DistrictWayanad
Population
 (2001)
  Total7,643
Languages
Time zoneUTC+5:30 (IST)
PIN
673575
Vehicle registrationKL-12
Literacy100%
Websitelsgkerala.in/pozhuthanapanchayat/

Physiography, relief and drainage

The panchayat comes under the highland region of Wayanad district and consists of many undulating hills intersected by valleys. In general, the area is having hilly to undulating topography with flat-bottomed valleys. Relief of the area is subnormal to normal.

Demographics

As of 2001 India census, Pozhuthana had a population of 7643 with 3747 males and 3896 females.[1]

Geographic location

Pozhuthana Panchayath Map
Route map

Pozhuthana panchayat in Vythiri taluk of Wayanad district is located about 8 km west of Kalpetta town. It is bounded on the north by Thariode panchayats, south by vythiri taluk panchayat, east by Kalpetta municipality and west by Kozhikode District. It lies between 11°31’57" and 11°37’53" north latitude and 75°56’38" and 76°03’21" east longitude.

The panchayat is mostly drained by Pozhuthana river and the streamlets draining into it. Pozhuthana River flows through the middle of the panchayat from south to north and finally drains into Kabani River. The panchayat area is moderately well drained to well drained and exhibits a dendritic drainage pattern. Depth of ground water fluctuates considerably with physiography, but generally remains between a depth of 5–20 m in the elevated areas and 1–5 m in the valleys.

Demographics

As of 2001 India census, Achooranam had a population of 9754 with 4755 males and 4999 females.[1]

Transportation

Puzhuthana is 74 km by road from Kozhikode railway station and this road includes nine hairpin bends. The nearest major airport is at Calicut. The road to the east connects to Mysore and Bangalore. Night journey is allowed on this sector as it goes through Bandipur national forest. The nearest railway station is Mysore. There are airports at Bangalore and Calicut. Pozhuthana is 5 kilometers from Vythiri town.

gollark: The rest of the instruction consists of variable-width (for fun) target specifiers. The first N target specifiers in an operation are used as destinations and the remaining ones as sources. N varies per opcode. They can be of the form `000DDD` (pop/push from/to stack index DDD), `001EEE` (peek stack index EEE if source, if destination then push onto EEE if it is empty), `010FFFFFFFF` (8-bit immediate value FFFFFFFF; writes are discarded), `011GGGGGGGGGGGGGGGG` (16-bit immediate value GGGGGGGGGGGGGGGG; writes are also discarded), `100[H 31 times]` (31-bit immediate because bee you), `101IIIIIIIIIIIIIIII` (16 bits of memory location relative to the base memory address register of the stack the operation is conditional on), `110JJJJJJJJJJJJJJJJ` (16 bit memory location relative to the top value on that stack instead), `1111LLLMMM` (memory address equal to base memory address of stack LLL plus top of stack MMM), or `1110NNN` (base memory address register of stack MMM).Opcodes (numbered from 0 in order): MOV (1 source, as many destinations as can be parsed validly; the value is copied to all of them), ADD (1 destination, multiple sources), JMP (1 source), NOT (same as MOV), WR (write to output port; multiple sources, first is port number), RE (read from input port; one source for port number, multiple destinations), SUB, AND, OR, XOR, SHR, SHL (bitwise operations), MUL, ROR, ROL, NOP, MUL2 (multiplication with two outputs).
gollark: osmarksISA™️-2028 is a VLIW stack machine. Specifically, it executes a 384-bit instruction composed of 8 48-bit operations in parallel. There are 8 stacks, for safety. Each stack also has an associated base memory address register, which is used in some "addressing modes". Each stack holds 64-bit integers; popping/peeking an empty stack simply returns 0, and the stacks can hold at most 32 items. Exceeding a stack's capacity is runtime undefined behaviour. The operation encoding is: `AABBBCCCCCCCCC`:A = 2-bit conditional operation mode - 0 is "run unconditionally", 1 is "run if top value on stack is 0", 2 is "run if not 0", 3 is "run if first bit is ~~negative~~ 1".B = 3-bit index for the stack to use for the conditional.C = 9-bit opcode (for extensibility).
gollark: By "really fast", I mean "in a few decaminutes, probably".
gollark: I suppose I could just specify it really fast.
gollark: I could, but do I really want to?

References

  1. "Census of India : Villages with population 5000 & above". Registrar General & Census Commissioner, India. Retrieved 10 December 2008.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.