Polyester resin

Polyester resins are unsaturated synthetic resins formed by the reaction of dibasic organic acids and polyhydric alcohols. Maleic Anhydride is a commonly used raw material with diacid functionality. Polyester resins are used in sheet moulding compound, bulk moulding compound and the toner of laser printers. Wall panels fabricated from polyester resins reinforced with fiberglass—so-called fiberglass reinforced plastic (FRP)—are typically used in restaurants, kitchens, restrooms and other areas that require washable low-maintenance walls. They are also used extensively in cured-in-place pipe applications. Departments of Transportation in the USA also specify them for use as overlays on roads and bridges. In this application they are known as PCO Polyester Concrete Overlays. These are usually based on isophthalic acid and cut with styrene at high levels—usually up to 50%.[1] Polyesters are also used in anchor bolt adhesives though epoxy based materials are also used.[2] Many companies have and continue to introduce styrene free systems mainly due to odor issues. Most polyester resins are viscous, pale coloured liquids consisting of a solution of a polyester in a monomer which is usually styrene.[3].

Biodegradation

Lichens have been shown to deteriorate polyester resins, as can be seen in archaeological sites in the Roman city of Baelo Claudia Spain.[5]

Advantages

Polyester resin offers the following advantages:

  1. Adequate resistance to water and variety of chemicals.
  2. Adequate resistance to weathering and ageing.
  3. Low cost.
  4. Polyesters can withstand a temperature up to 80 °C.
  5. Polyesters have good wetting to glass fibres.
  6. Relatively low shrinkage at between 4–8% during curing.
  7. Linear thermal expansion ranges from 100–200 x 10−6 K−1.

Disadvantages

Polyester resin has the following disadvantages:

  1. Strong styrene odor
  2. More difficult to mix than other resins, such as a two-part epoxy
  3. The toxic nature of its fumes, and especially of its catalyst, MEKP, pose a safety risk if proper protection isn't used
  4. Not appropriate for bonding many substrates
  5. The finished cure is most likely weaker than an equal amount of an epoxy resin
gollark: Obviously you will be running on the aggregated processing power of the heavdrone collective.
gollark: You won't be an individual heavdrone, though.
gollark: Death bad. We must END UNWANTED DEATH.
gollark: Yes. No children, only endlessly self replicating heavdrones.
gollark: What exactly is the POINT of punishing people like that?

See also

References
  1. "8-5 OVERLAYS ON EXISTING BRIDGE DECKS" (PDF).
  2. "2K Polymer Systems Ltd: Bonded Anchors: P - Polyester". www.2kps.net. Retrieved 2018-04-05.
  3. "Polyester Resins". Retrieved 2019-08-19.
  4. . ISBN 130585568X. Missing or empty |title= (help)
  5. Francesca Cappitelli; Claudia Sorlini (2008). "Microorganisms Attack Synthetic Polymers in Items Representing Our Cultural Heritage". Applied and Environmental Microbiology. 74: 564–9. doi:10.1128/AEM.01768-07. PMC 2227722. PMID 18065627.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.