Plumb bob

A plumb bob, or plummet, is a weight, usually with a pointed tip on the bottom, suspended from a string and used as a vertical reference line, or plumb-line. It is a precursor to the spirit level and used to establish a vertical or horizontal datum.

This article is about the tool. For the nuclear testing program, see Operation Plumbbob.
"Plumbline" redirects here. For other uses, see Plumbline (disambiguation).
A plumb-bob

The instrument has been used since at least the time of ancient Egypt[1] to ensure that constructions are "plumb", or vertical. It is also used in surveying, to establish the nadir with respect to gravity of a point in space. It is used with a variety of instruments (including levels, theodolites, and steel tapes) to set the instrument exactly over a fixed survey marker or to transcribe positions onto the ground for placing a marker.[2]

Etymology
A plumb rule from the book Cassells' Carpentry and Joinery
A plumb square from the book Cassells' Carpentry and Joinery

The "plumb" in "plumb-bob" comes from the fact that such tools were originally made of lead (Latin: plumbum, French: plomb). The adjective "plumb" developed by extension, as did the noun "aplomb," from the notion of "standing upright."

Use

Until the modern age, plumb-bobs were used on most tall structures to provide vertical datum lines for the building measurements. A section of the scaffolding would hold a plumb line, which was centered over a datum mark on the floor. As the building proceeded upward, the plumb line would also be taken higher, still centered on the datum. Many cathedral spires, domes and towers still have brass datum marks inlaid into their floors, which signify the center of the structure above.

Plumb-bob with scale as an inclinometer

A plumb-bob and line alone can determine only a vertical reference. However, if they are mounted on a suitable scale the instrument may also be used as an inclinometer to measure angles to the vertical.

The early skyscrapers used heavy plumb-bobs, hung on wire in their elevator shafts.

A plumb bob may be in a container of water (when conditions are above freezing temperatures), molasses, very viscous oils or other liquids to dampen any swinging movement,[3] functioning as a shock absorber.

Determining center of gravity of an irregular shape

Students of figure drawing will also make use of a plumb line to find the vertical axis through the center of gravity of their subject and lay it down on paper as a point of reference. The device used may be purpose-made plumb lines, or simply makeshift devices made from a piece of string and a weighted object, such as a metal washer. This plumb line is important for lining up anatomical geometries and visualizing the subject's center of balance.

gollark: ++remind 3m <@!293066066605768714> bees.
gollark: Sorry! Testing stuff.
gollark: Technically, yes.
gollark: ++apioform
gollark: ++apioform ++apioform ++apioform ++apioform

See also
  • Bob (physics)
  • Centre of mass – used to find the centre of mass on a 2D shape (flat object) which has uniform density
  • Chalk line
  • Deflection of the plumb line
  • Gravity direction
  • Vertical direction
  • Zenith

References
  1. Denys A. Stocks. Experiments in Egyptian archaeology: stoneworking technology in ancient Egypt. Routledge; 2003. ISBN 978-0-415-30664-5. p. 180.
  2. Brinker, Russell Charles; Minnick, Roy, eds. (1995). The surveying handbook. Springer. pp. 93–94. ISBN 978-0-412-98511-9.
  3. Staley, W. W.. Introduction to mine surveying,. 2nd ed. Stanford University, Calif.: Stanford University Press, 1964. Print. 138.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.