Negative base

A negative base (or negative radix) may be used to construct a non-standard positional numeral system. Like other place-value systems, each position holds multiples of the appropriate power of the system's base; but that base is negative—that is to say, the base $b$ is equal to $-r$ for some natural number $r$ ( $r \geq 2$ ).

Negative-base systems can accommodate all the same numbers as standard place-value systems, but both positive and negative numbers are represented without the use of a minus sign (or, in computer representation, a sign bit); this advantage is countered by an increased complexity of arithmetic operations. The need to store the information normally contained by a negative sign often results in a negative-base number being one digit longer than its positive-base equivalent.

The common names for negative-base positional numeral systems are formed by prefixing nega- to the name of the corresponding positive-base system; for example, negadecimal (base −10) corresponds to decimal (base 10), negabinary (base −2) to binary (base 2), negaternary (base −3) to ternary (base 3), and negaquaternary (base −4) to quaternary (base 4).[1][2]

Example

Consider what is meant by the representation 12243 in the negadecimal system, whose base $b$ is −10:

Multiples of
$(-10) 4 = 10,000$	$(-10) 3 = -1,000$	$(-10) 2 = 100$	$(-10) 1 = -10$	$(-10) 0 = 1$
1	2	2	4	3

Since 10,000 + (−2,000) + 200 + (−40) + 3 = 8,163, the representation 12,243₋₁₀ in negadecimal notation is equivalent to 8,163₁₀ in decimal notation, while −8,163₁₀ in decimal would be written 9,977₋₁₀ in negadecimal.

History

Negative numerical bases were first considered by Vittorio Grünwald in an 1885 monograph published in Giornale di Matematiche di Battaglini.[3] Grünwald gave algorithms for performing addition, subtraction, multiplication, division, root extraction, divisibility tests, and radix conversion. Negative bases were later mentioned in passing by A. J. Kempner in 1936[4] and studied in more detail by Zdzisław Pawlak and A. Wakulicz in 1957.[5]

Negabinary was implemented in the early Polish computer BINEG (and UMC), built 1957–59, based on ideas by Z. Pawlak and A. Lazarkiewicz from the Mathematical Institute in Warsaw.[6] Implementations since then have been rare.

Notation and use

Denoting the base as $-r$ , every integer $a$ can be written uniquely as

a=\sum _{i=0}^{n}d_{i}(-r)^{i}

where each digit $d k$ is an integer from 0 to $r - 1$ and the leading digit $d n$ is $> 0$ (unless $n =0$ ). The base $-r$ expansion of $a$ is then given by the string $d n d n -1 ... d 1 d 0$ .

Negative-base systems may thus be compared to signed-digit representations, such as balanced ternary, where the radix is positive but the digits are taken from a partially negative range. (In the table below the digit of value −1 is written as the single character T.)

Some numbers have the same representation in base $-r$ as in base $r$ . For example, the numbers from 100 to 109 have the same representations in decimal and negadecimal. Similarly,

17=2^{4}+2^{0}=(-2)^{4}+(-2)^{0}

and is represented by 10001 in binary and 10001 in negabinary.

Some numbers with their expansions in a number of positive and corresponding negative bases are:

Decimal	Negadecimal	Binary	Negabinary	Ternary	Negaternary	Balanced Ternary	Nega Balanced Ternary	Quaternary	Negaquaternary
−15	25	−1111	110001	−120	1220	T110	11T0	−33	1301
⋮	⋮	⋮	⋮	⋮	⋮	⋮	⋮	⋮	⋮
−5	15	−101	1111	−12	21	T11	TT1	−11	23
−4	16	−100	1100	−11	22	TT	1T	−10	10
−3	17	−11	1101	−10	10	T0	10	−3	11
−2	18	−10	10	−2	11	T1	11	−2	12
−1	19	−1	11	−1	12	T	T	−1	13
0	0	0	0	0	0	0	0	0	0
1	1	1	1	1	1	1	1	1	1
2	2	10	110	2	2	1T	TT	2	2
3	3	11	111	10	120	10	T0	3	3
4	4	100	100	11	121	11	T1	10	130
5	5	101	101	12	122	1TT	11T	11	131
6	6	110	11010	20	110	1T0	110	12	132
7	7	111	11011	21	111	1T1	111	13	133
8	8	1000	11000	22	112	10T	10T	20	120
9	9	1001	11001	100	100	100	100	21	121
10	190	1010	11110	101	101	101	101	22	122
11	191	1011	11111	102	102	11T	1TT	23	123
12	192	1100	11100	110	220	110	1T0	30	110
13	193	1101	11101	111	221	111	1T1	31	111
14	194	1110	10010	112	222	1TTT	TT1T	32	112
15	195	1111	10011	120	210	1TT0	TT10	33	113
16	196	10000	10000	121	211	1TT1	TT11	100	100
17	197	10001	10001	122	212	1T0T	TT0T	101	101
18	198	10010	10110	200	200	1T10	TTT0	102	102

Note that, with the exception of nega balanced ternary, the base $-r$ expansions of negative integers have an even number of digits, while the base $-r$ expansions of the non-negative integers have an odd number of digits.

Calculation

The base $-r$ expansion of a number can be found by repeated division by $-r$ , recording the non-negative remainders $\in \{0,1,\ldots ,r-1\}$ , and concatenating those remainders, starting with the last. Note that if $a / b = c$ , remainder $d$ , then $bc + d = a$ and therefore $d = a - bc$ . To arrive at the correct conversion, the value for $c$ must be chosen such that $d$ is non-negative and minimal. This is exemplified in the fourth line of the following example wherein –5 ÷ –3 must be chosen to equal 2 remainder 1 instead of 1 remainder 2.

For example, to convert 146 in decimal to negaternary:

{\begin{array}{rr}146\div (-3)=&-48~\operatorname {remainder} ~2\\-48\div (-3)=&16~\operatorname {remainder} ~0\\16\div (-3)=&-5~\operatorname {remainder} ~1\\-5\div (-3)=&2~\operatorname {remainder} ~1\\2\div (-3)=&0~\operatorname {remainder} ~2\end{array}}

Reading the remainders backward we obtain the negaternary representation of 146₁₀: 21102_–3.

Proof: (((2·(–3)+1)·(–3)+1)·(–3)+0)·(–3)+2 = 146₁₀.

Note that in most programming languages, the result (in integer arithmetic) of dividing a negative number by a negative number is rounded towards 0, usually leaving a negative remainder. In such a case we have $a = (- r) c + d = (- r) c + d - r + r = (- r)(c + 1) + (d + r)$ . Because $|d| < r$ , $(d + r)$ is the positive remainder. Therefore, to get the correct result in such case, computer implementations of the above algorithm should add 1 and $r$ to the quotient and remainder respectively.

Example implementation code

To negabinary

C#

static string ToNegabinary(int value)
{
	string result = string.Empty;

	while (value != 0)
	{
		int remainder = value % -2;
		value = value / -2;

		if (remainder < 0)
		{
			remainder += 2;
			value += 1;
		}

		result = remainder.ToString() + result;
	}

	return result;
}

C++

auto to_negabinary(int value)
{
    std::bitset<sizeof(int) * CHAR_BIT > result;
    std::size_t bit_position = 0;

    while (value != 0)
    {
        const auto div_result = std::div(value, -2);

        if (div_result.rem < 0)
            value = div_result.quot + 1;
        else
            value = div_result.quot;

        result.set(bit_position, div_result.rem != 0);

        ++bit_position;
    }

    return result;
}

To negaternary

C#

static string negaternary(int value)
{
	string result = string.Empty;

	while (value != 0)
	{
		int remainder = value % -3;
		value = value / -3;

		if (remainder < 0)
		{
			remainder += 3;
			value += 1;
		}

		result = remainder.ToString() + result;
	}

	return result;
}

Visual Basic .NET

Private Shared Function ToNegaternary(value As Integer) As String
	Dim result As String = String.Empty

	While value <> 0
		Dim remainder As Integer = value Mod -3
		value /= -3

		If remainder < 0 Then
			remainder += 3
			value += 1
		End If

		result = remainder.ToString() & result
	End While

	Return result
End Function

Python

def negaternary(i: int) -> str:
    """Decimal to negaternary."""
    if i == 0:
        digits = ['0']
    else:
        digits = []
        while i != 0:
            i, remainder = divmod(i, -3)
            if remainder < 0:
                i, remainder = i + 1, remainder + 3
            digits.append(str(remainder))
    return ''.join(digits[::-1])

>>> negaternary(1000)
'2212001'

Common Lisp

(defun negaternary (i)
  (if (zerop i)
      "0"
      (let ((digits "")
            (rem 0))
        (loop while (not (zerop i)) do
          (progn
            (multiple-value-setq (i rem) (truncate i -3))
            (when (minusp rem)
              (incf i)
              (incf rem 3))
            (setf digits (concatenate 'string (write-to-string rem) digits))))
        digits)))

To any negative base

Java

    public String negativeBase(int integer, int base) {
        String result = "";
        int number = integer;
        while (number != 0) {
            int i = number % base;
            number /= base;
            if (i < 0) {
                i += Math.abs(base);
                number++;
            }

            result = i + result;
        }

        return result;
    }

AutoLisp

from [-10 -2] interval:

(defun negabase (num baz / dig rst)
  ;; NUM is any number. BAZ is any number in the interval [-10, -2].
  ;;
  ;; NUM and BAZ will be truncated to an integer if they're floats (e.g. 14.25
  ;; will be truncated to 14, -123456789.87 to -123456789, etc.).
  (if (and (numberp num)
           (numberp baz)
           (<= (fix baz) -2)
           (> (fix baz) -11))
      (progn
        (setq baz (float (fix baz))
              num (float (fix num))
              dig (if (= num 0) "0" ""))
        (while (/= num 0)
               (setq rst (- num (* baz (setq num (fix (/ num baz))))))
               (if (minusp rst)
                   (setq num (1+ num)
                         rst (- rst baz)))
               (setq dig (strcat (itoa (fix rst)) dig)))
        dig)
      (progn
        (prompt
         (cond
           ((and (not (numberp num))
                 (not (numberp baz)))
            "\nWrong number and negabase.")
           ((not (numberp num))
            "\nWrong number.")
           ((not (numberp baz))
            "\nWrong negabase.")
           (t
            "\nNegabase must be inside [-10 -2] interval.")))
        (princ))))

PHP

The conversion from integer to some negative base:

function toNegativeBase($no, $base)
{
    $digits = array();
    $base = intval($base);
    while ($no != 0) {
        $temp_no = $no;
        $no = intval($temp_no / $base);
        $remainder = ($temp_no % $base);

        if ($remainder < 0) {
            $remainder += abs($base);
            $no++;
        }

        array_unshift($digits, $remainder);
    }

    return $digits;
}

Visual Basic .NET

Function toNegativeBase(Number As Integer , base As Integer) As System.Collections.Generic.List(Of Integer)

    Dim digits As New System.Collections.Generic.List(Of Integer)
    while Number <> 0
        Dim remainder As Integer= Number Mod base
        Number = CInt(Number / base)
 
        if remainder < 0 then
            remainder += system.math.abs(base)
            Number+=1
        end if
 
        digits.Insert(0, remainder)
    end while
 
    return digits
end function

Shortcut calculation

The following algorithms assume that

the input is available in bitstrings and coded in (base +2; digits $\in \;\{0,1\}$ ) (as in most today's digital computers),
there are add (+) and xor (^) operations which operate on such bitstrings (as in most today's digital computers),
the set $D$ of output digits is standard, i. e. $D=\{0,|b|-1\}$ with base $b\in \{-2,-4\}$ ,
the output is coded in the same bitstring format, but the meaning of the places is another one.

To negabinary

The conversion to negabinary (base −2; digits $\in \;\{0,1\}$ ) allows a remarkable shortcut (C implementation):

unsigned int toNegaBinary(unsigned int value) // input in standard binary
{
	unsigned int Schroeppel2 = 0xAAAAAAAA; // = 2/3*((2*2)^16-1) = ...1010
	return (value + Schroeppel2) ^ Schroeppel2; // eXclusive OR
	// resulting unsigned int to be interpreted as string of elements ε {0,1} (bits)
}

Due to D. Librik (Szudzik). The bitwise XOR portion is originally due to Schroeppel (1972).[7]

JavaScript port for the same shortcut calculation:

function toNegaBinary(number) {
    var Schroeppel2 = 0xAAAAAAAA;
    // Convert to NegaBinary String
    return ( ( number + Schroeppel2 ) ^ Schroeppel2 ).toString(2);
}

To negaquaternary

The conversion to negaquaternary (base −4; digits $\in \;\{0,1,2,3\}$ ) allows a similar shortcut (C implementation):

unsigned int toNegaQuaternary(unsigned int value) // input in standard binary
{
	unsigned int Schroeppel4 = 0xCCCCCCCC; // = 4/5*((2*4)^8-1) = ...11001100 = ...3030
	return (value + Schroeppel4) ^ Schroeppel4; // eXclusive OR
	// resulting unsigned int to be interpreted as string of elements ε {0,1,2,3} (pairs of bits)
}

JavaScript port for the same shortcut calculation:

function toNegaQuaternary(number) {
    var Schroeppel4 = 0xCCCCCCCC;
    // Convert to NegaQuaternary String
    return ( ( number + Schroeppel4 ) ^ Schroeppel4 ).toString(4);
}

Arithmetic operations

The following describes the arithmetic operations for negabinary; calculations in larger bases are similar.

Addition

Adding negabinary numbers proceeds bitwise, starting from the least significant bits; the bits from each addend are summed with the (balanced ternary) carry from the previous bit (0 at the LSB). This sum is then decomposed into an output bit and carry for the next iteration as show in the table:

Sum		Output			Comment
Sum		Bit	Carry		Comment
−2	010₋₂	0	1	01₋₂	−2 occurs only during subtraction.
−1	011₋₂	1	1	01₋₂
0	000₋₂	0	0	00₋₂
1	001₋₂	1	0	00₋₂
2	110₋₂	0	−1	11₋₂
3	111₋₂	1	−1	11₋₂	3 occurs only during addition.

The second row of this table, for instance, expresses the fact that −1 = 1 + 1 × −2; the fifth row says 2 = 0 + −1 × −2; etc.

As an example, to add 1010101₋₂ (1 + 4 + 16 + 64 = 85) and 1110100₋₂ (4 + 16 − 32 + 64 = 52),

Carry:          1 −1  0 −1  1 −1  0  0  0
First addend:         1  0  1  0  1  0  1
Second addend:        1  1  1  0  1  0  0 +
               --------------------------
Number:         1 −1  2  0  3 −1  2  0  1
Bit (result):   1  1  0  0  1  1  0  0  1
Carry:          0  1 −1  0 −1  1 −1  0  0

so the result is 110011001₋₂ (1 − 8 + 16 − 128 + 256 = 137).

Another method

While adding two negabinary numbers, every time a carry is generated an extra carry should be propagated to next bit. Consider same example as above

Extra carry:       1  1  0  1  0  0  0     
Carry:          1  0  1  1  0  1  0  0  0
First addend:         1  0  1  0  1  0  1
Second addend:        1  1  1  0  1  0  0 +
               --------------------------
Answer:         1  1  0  0  1  1  0  0  1

Negabinary full adder

A full adder circuit can be designed to add numbers in negabinary. The following logic is used to calculate the sum and carries:[8]

s_{i}=a_{i}\oplus b_{i}\oplus c_{i}^{+}\oplus c_{i}^{-}

c_{i+1}^{+}={\overline {a_{i}}}{\overline {b_{i}}}{\overline {c_{i}^{+}}}c_{i}^{-}

c_{i+1}^{-}=a_{i}b_{i}{\overline {c_{i}^{-}}}+(a_{i}\oplus b_{i})c_{i}^{+}{\overline {c_{i}^{-}}}

Incrementing negabinary numbers

Incrementing a negabinary number can be done by using the following formula:[9]

2x\oplus ((2x\oplus x)+1)

Subtraction

To subtract, multiply each bit of the second number by −1, and add the numbers, using the same table as above.

As an example, to compute 1101001₋₂ (1 − 8 − 32 + 64 = 25) minus 1110100₋₂ (4 + 16 − 32 + 64 = 52),

Carry:          0  1 −1  1  0  0  0
First number:   1  1  0  1  0  0  1
Second number: −1 −1 −1  0 −1  0  0 +
               --------------------
Number:         0  1 −2  2 −1  0  1
Bit (result):   0  1  0  0  1  0  1
Carry:          0  0  1 −1  1  0  0

so the result is 100101₋₂ (1 + 4 −32 = −27).

Unary negation, $- x$ , can be computed as binary subtraction from zero, $0 - x$ .

Multiplication and division

Shifting to the left multiplies by −2, shifting to the right divides by −2.

To multiply, multiply like normal decimal or binary numbers, but using the negabinary rules for adding the carry, when adding the numbers.

First number:                   1  1  1  0  1  1  0
Second number:                  1  0  1  1  0  1  1 ×
              -------------------------------------
                                1  1  1  0  1  1  0
                             1  1  1  0  1  1  0

                       1  1  1  0  1  1  0
                    1  1  1  0  1  1  0

              1  1  1  0  1  1  0                   +
              -------------------------------------
Carry:        0 −1  0 −1 −1 −1 −1 −1  0 −1  0  0
Number:       1  0  2  1  2  2  2  3  2  0  2  1  0
Bit (result): 1  0  0  1  0  0  0  1  0  0  0  1  0
Carry:           0 −1  0 −1 −1 −1 −1 −1  0 −1  0  0

For each column, add carry to number, and divide the sum by −2, to get the new carry, and the resulting bit as the remainder.

Comparing negabinary numbers

It is possible to compare negabinary numbers by slightly adjusting a normal unsigned binary comparator. When comparing the numbers $A$ and $B$ , invert each odd positioned bit of both numbers. After this, compare $A$ and $B$ using a standard unsigned comparator.[10]

Fractional numbers

Base $-r$ representation may of course be carried beyond the radix point, allowing the representation of non-integral numbers.

As with positive-base systems, terminating representations correspond to fractions where the denominator is a power of the base; repeating representations correspond to other rationals, and for the same reason.

Non-unique representations

Unlike positive-base systems, where integers and terminating fractions have non-unique representations (for example, in decimal 0.999... = 1) in negative-base systems the integers have only a single representation. However, there do exist rationals with non-unique representations. For the digits {0, 1, ..., t} with $\mathbf {t$ the biggest digit and

T:=0.{\overline {01}}_{b}=\sum _{i=1}^{\infty }b^{-2i}={\frac {1}{b^{2}-1}}={\frac {1}{r^{2}-1}}

we have

0.{\overline {0\mathbf {t} }}_{b}=\mathbf {t} T={\frac {r\!-\!\!1}{r^{2}-1}}={\frac {1}{r+1}}

as well as

1.{\overline {\mathbf {t} 0}}_{b}=1+\mathbf {t} bT={\frac {(r^{2}-1)+(r\!-\!\!1)b}{r^{2}-1}}={\frac {1}{r+1}}.

So every number ${\frac {1}{r+1}}+z$ with a terminating fraction $z\in \mathbb {Z} r^{\mathbb {Z} }$ added has two distinct representations.

For example, in negaternary, i.e. $b=-3$ and $\mathbf {t} =2$ , there is

1.{\overline {02}}_{(-3)}={\frac {5}{4}}=2.{\overline {20}}_{(-3)}

.

Such non-unique representations can be found by considering the largest and smallest possible representations with integral parts 0 and 1 respectively, and then noting that they are equal. (Indeed, this works with any integral-base system.) The rationals thus non-uniquely expressible are those of form

{\frac {z(r+1)+1}{b^{i}(r+1)}}

with $z,i\in \mathbb {Z} .$

Imaginary base

Just as using a negative base allows the representation of negative numbers without an explicit negative sign, using an imaginary base allows the representation of Gaussian integers. Donald Knuth proposed the quater-imaginary base (base 2i) in 1955.[11]

gollark: That seems like one of those not-actually-meaningful fake profound things.

gollark: https://qntm.org/destroy

gollark: This is apparently limited to some lowish % of light speed due to energy lost decelerating the hydrogen.

gollark: One idea was also the Bussard ramjet, where you scoop up interstellar hydrogen and run it through a fusion reactor for propulsion.

gollark: It's not very efficient.

References

Knuth, Donald (1998), The Art of Computer Programming, Volume 2 (3rd ed.), pp. 204–205. Knuth mentions both negabinary and negadecimal.
The negaternary system is discussed briefly in Petkovšek, Marko (1990), "Ambiguous numbers are dense", The American Mathematical Monthly, 97 (5): 408–411, doi:10.2307/2324393, ISSN 0002-9890, MR 1048915.
Vittorio Grünwald. Intorno all'aritmetica dei sistemi numerici a base negativa con particolare riguardo al sistema numerico a base negativo-decimale per lo studio delle sue analogie coll'aritmetica ordinaria (decimale), Giornale di Matematiche di Battaglini (1885), 203-221, 367
Kempner, A. J. (1936), "Anormal Systems of Numeration", American Mathematical Monthly, 43 (10): 610–617, doi:10.2307/2300532, MR 1523792. The only reference to negative bases is a footnote on page 610, which reads, "Positive numbers less than 1 and negative numbers may be used as bases with slight modifications of the process and suitable restrictions on the set of digits employed."
Pawlak, Z.; Wakulicz, A. (1957), "Use of expansions with a negative basis in the arithmometer of a digital computer", Bulletin de l'Académie Polonaise des Sciences, Classe III, 5: 233–236.
Marczynski, R. W., "The First Seven Years of Polish Computing" Archived 2011-07-19 at the Wayback Machine, IEEE Annals of the History of Computing, Vol. 2, No 1, January 1980
See the MathWorld Negabinary link
Francis, Suganda, Shizuhuo, Yu, Jutamulia, Yin (4 September 2001). Introduction to Information Optics. Academic Press. p. 498. ISBN 9780127748115.CS1 maint: multiple names: authors list (link)
"Archived copy". Retrieved 2016-08-29.
Murugesan, San (1977). "Negabinary arithmetic circuits using binary arithmetic". IEE Journal on Electronic Circuits and Systems. 1 (2): 77. doi:10.1049/ij-ecs.1977.0005.
D. Knuth. The Art of Computer Programming. Volume 2, 3rd Edition. Addison-Wesley. pp. 205, "Positional Number Systems"

External links

Weisstein, Eric W. "Negabinary". MathWorld.
Weisstein, Eric W. "Negadecimal". MathWorld.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

[1] Knuth, Donald (1998), The Art of Computer Programming, Volume 2 (3rd ed.), pp. 204–205. Knuth mentions both negabinary and negadecimal.

[2] The negaternary system is discussed briefly in Petkovšek, Marko (1990), "Ambiguous numbers are dense", The American Mathematical Monthly, 97 (5): 408–411, doi:10.2307/2324393, ISSN 0002-9890, MR 1048915.

[3] Vittorio Grünwald. Intorno all'aritmetica dei sistemi numerici a base negativa con particolare riguardo al sistema numerico a base negativo-decimale per lo studio delle sue analogie coll'aritmetica ordinaria (decimale), Giornale di Matematiche di Battaglini (1885), 203-221, 367

[4] Kempner, A. J. (1936), "Anormal Systems of Numeration", American Mathematical Monthly, 43 (10): 610–617, doi:10.2307/2300532, MR 1523792. The only reference to negative bases is a footnote on page 610, which reads, "Positive numbers less than 1 and negative numbers may be used as bases with slight modifications of the process and suitable restrictions on the set of digits employed."

[5] Pawlak, Z.; Wakulicz, A. (1957), "Use of expansions with a negative basis in the arithmometer of a digital computer", Bulletin de l'Académie Polonaise des Sciences, Classe III, 5: 233–236.

[6] Marczynski, R. W., "The First Seven Years of Polish Computing" Archived 2011-07-19 at the Wayback Machine, IEEE Annals of the History of Computing, Vol. 2, No 1, January 1980

[7] See the MathWorld Negabinary link

[8] Francis, Suganda, Shizuhuo, Yu, Jutamulia, Yin (4 September 2001). Introduction to Information Optics. Academic Press. p. 498. ISBN 9780127748115.CS1 maint: multiple names: authors list (link)

[9] "Archived copy". Retrieved 2016-08-29.

[10] Murugesan, San (1977). "Negabinary arithmetic circuits using binary arithmetic". IEE Journal on Electronic Circuits and Systems. 1 (2): 77. doi:10.1049/ij-ecs.1977.0005.

[11] D. Knuth. The Art of Computer Programming. Volume 2, 3rd Edition. Addison-Wesley. pp. 205, "Positional Number Systems"

Negative base

Example

History

Notation and use

Calculation

Example implementation code

To negabinary

C#

C++

To negaternary

C#

Visual Basic .NET

Python

Common Lisp

To any negative base

Java

AutoLisp

PHP

Visual Basic .NET

Shortcut calculation

To negabinary

To negaquaternary

Arithmetic operations

Addition

Another method

Negabinary full adder

Incrementing negabinary numbers

Subtraction

Multiplication and division

Comparing negabinary numbers

Fractional numbers

Non-unique representations

Imaginary base

See also

References

Further reading

External links